Peyton Place Motorcycle Reviews

Filter

Write a review and get Webike Points!

Reviews

Peyton Place Headset BT-11B Clear all

Stainless steel, machine bent, exhaust pipe

Peyton Place

02 Apr 2024

Stainless steel, machine bent, exhaust pipe

Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500

Japanese Webike user

3/5

Tuning premise.

I have now switched back to OEM exhaust pipes, but for a while I used these Stainless Steel Exhaust Pipes.
We hope this will be helpful to those who are going to customize their own products,
There were good and bad parts and I would like to make an IMPRESSION.

Exhaust pipe
The exhaust pipe is a pipe that connects the engine to the silencer, and it is expected to reduce weight and increase power in a large range. 。 The exhaust pipe is also changed so that the stress-up effect is even higher.

Effect of external exhaust pipe
‥
◎The exhaust from the engine is smoothly guided into the air by the large engine. It plays an important role in adjusting exhaust efficiency.
◎Lightweight. OEM is Steel, so it is also heavy. On the other hand, Stainless Steel and Titanium can be made lighter in large widths. Weight reduction also has advantages, such as making corner rings easier.
Large bank angle expansion:While the OEM is horizontal, the external model is angled, either Large or Small, so the bank angle is deeper than the NORMAL model.

This is Peyton Place's Stainless exhaust pipe,

【good point】
The exhaust pipe has a straighter structure inside, so the sound is more powerful. The sound is large but high because it is made of stainless steel.

Power up at high rpm is possible depending on the combination of ◎carburetor and exhaust system.

The color of the exhaust pipe curves is beautiful.

◎Stainless Steel, so it is corrosion resistant and lightweight. You will feel the difference.

[Bad point]
It may not pass inspection because it is ?Straight and has no catalyst. It did not pass.

Power up is not expected.

?Low speed Torque is considerably reduced in exchange for high RPM bower.

Naturally, there is Merit and Demerit.
I would like to write my past Spec. and impressions.

Normal cab + Corresponding exhaust + Peyton Place exhaust pipe
The sound is a bit louder, but I don't notice any particular effect. After Fire is often seen. I don't need to change the setting all year round.

(2) Normal cab + Japanese Vehicle Inspection Correspondence Non-Corresponding Exhaust + Peyton PlaceExhaust pipe
The sound is quite loud, and when the carburetor setting is applied, it turns beautifully up to high rpm, but I don't feel a sense of power. The carburetor setting is very good. The carburetor setting is a little bit gapped when the season changes. It becomes darker in the rainy season.

FCR Carburetor Body + Japanese Vehicle Inspection Correspondence + Peyton PlaceExhaust pipe
Power feeling is the same as (2).
Setting is fine-tuned for each season.

FCR Carburetor Body + It does not correspond to Japanese Vehicle Inspection + Peyton PlaceExhaust pipe
→Low speed Torque is definitely down. But Response and acceleration from mid to high speed is very good.
Setting needs to be changed ? fine-tuned→◎ each season.

Maybe the Straight structure of the exhaust pipe is more for racing than for public roads.
On the other hand, if the engine power is strengthened by bore up, etc., and the carburetor is made high performance and combined with a good exhaust system, it may be possible to have a great experience.
However, I am not sure that it would be easy as it could be quite Delicate in character of the body.

In my case, my riding style changed and I changed to a style of driving slowly and attacking mountain passes, and the carburetor setting became annoying and troublesome, so I returned to OEM exhaust pipes.
However, the exhaust pipe here has a high "dress-up" effect, so I think it will give you a great visual effect. Also, depending on the combination, it can be used to increase the power of the car, so I think it will be very interesting.
The combination of FCR Carburetor Body and external exhaust system made me think that SR400 is such a motorcycle. I was under the illusion that SR400 is such a motorcycle. View detail

Peyton Place

29 Feb 2024

Stainless Steel/Short Fender

Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500

Japanese Webike user

5/5

Balance between appearance and practicality

I prefer the cooler look, but I was looking for a proper Fender, and I use Payton's Stainless Steel Fender, which has a good balance of looks and practicality. 。

■The Purpose and Role of Fender.
The Fender is the outer plate Parts installed to cover the Tire, and the Parts that cover the front wheels around the front wheels. "Front Fender" We call it "the
The Fender is a large part that prevents mud, sand, small stones, etc. from rolling up from the Tire and hitting the BodyBody or surrounding pedestrians when driving, and also prevents contact between the Tire and pedestrians, etc. to prevent entrapment accidents. In the case of water-cooled Radiator, there is a possibility of foreign objects or damage to the Radiator, so please be careful.

■Non-Mudguard Features ■
Protect foreign objects from being caught in the Tire while driving.
? Protect Inner Tube of Front fork.
Stabilizer effect:By fixing to the front fork, front rigidity can be expected to be increased.

good point
■Material:Stainless, so it is resistant to corrosion.

Stabilizer effect can also be expected.

Stylish appearance, suitable for a cafe racer or an English-style custom.

A bad point
● The length of the fender is a little short, so be careful about mud splattering in the rain.

As a term relative to Fender, "Fender Eliminator I am sure many of you have heard the term
As the name suggests, this is a motorcycle without a fender. Naturally, rain and mud spray will cause the motorcycle body and rider to fly backwards, but it is possible to customize the bike to look stylish.
On the other hand, it is not a recommended customization because mud flies and front strength is reduced. →If possible, it is safer to use the Stabilizer (sold separately).

Incidentally, although it is not illegal to remove the Motorcycle Fender itself, it is necessary to submit a notification to the DMV in advance if the overall length of the vehicle body, etc., is changed as a result.
Car inspection and Fender*.
◎It is possible to pass the vehicle inspection without Front Fender. However, if Custom is judged to be dangerous without Fender, it will fail the vehicle inspection.
◎Cracks and dents also fail the inspection if they are dangerous.
→ Cracks and dents may pass inspection if corrected.

* * * Fenders are not particularly prominent parts, but they make a large contribution to the safety and comfort of motorcyclists and riders.
The design varies from motorcycle to motorcycle, so it is interesting to check what kind of Fender is equipped on each motorcycle. View detail

Stainless Steel Megaphone Slip-on Exhaust

Stainless Steel/Megaphone Slip-on Silencer

Peyton Place

22 Jul 2023

Stainless Steel/Megaphone Slip-on Silencer

Fits: YAMAHA SR400, YAMAHA SR500

Japanese Webike user

5/5

Best Single sound ….

I had been using the JMCA Correspondence Exhaust System from Peyton Place, but the sound was not good enough, so I purchased this system.

We were in the process of purchasing and emailed Peyton Place to discuss various options. They responded immediately even though they were very busy. Thank you very much.

I would like to respond to the SRUser who has concerns about purchasing an Exhaust System from Peyton Place with information that was actually given to me.

1 Peyton PlaceExhaust System Corresponds to all models if SR.

2 There is no Exclusive Design for Carburetor Vehicles and FI Vehicles. FI Vehicles are installed with the included Adapter, while Carburetor Vehicles are fixed with Bolt. In short, if the Exhaust System for Carburetor is not in stock, you can purchase the one for FI Vehicles.

3 The most important thing to note for FI Vehicles is that FI Vehicles are not subject to vehicle inspection, even if they are JMCA CorrespondenceMODEL!

The above is the information that Peyton Place answered directly to me, and I hope it will be helpful to all SR riders.

The Megaphone Exhaust that I purchased has a great sound and is lightweight.

Sound at 3000-4000 rpm is especially great! After Fire is still there when I apply embrittlement. I have a SR with the secondary airflow blocked with a cancellation plate, so it is not that bad.

Installation was very easy. Once you get used to it, it takes less than 20 minutes. However, be sure to use a torque wrench to control the torque, because if the torque is too loose, the bolt will come off due to vibration, and if the torque is too tight, the bolt screw may break. View detail

Peyton Place

24 Feb 2023

Stainless Steel Battery Case

Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400

Japanese Webike user

2/5

It is not practical.

Take the Side cover, Air cleaner box and Refreshing Space under the Seat.
Small TypeBattery cars and Battery reply cars are suitable.

I am not talking about functional parts.
Dress-upItems, for those who are going to convert to Cafe racer.

good point
Fat Material:Stainless Steel, so it is resistant to corrosion.

Refreshing around carburetor such as battery, air cleaner, etc. 。

◯Cafe racer, no question, suits British custom.

A bad point
◯The Instruction Manual is inadequate and difficult to understand.

◯A separate air filter or breather filter is required because it is not compatible with normal air cleaners.

Carburetor setting should be performed since it is not a normal air cleaner.

For vehicles with Fat Exhaust Gas regulation, use a dedicated KIT (Other Brand Product).

◯It is not completely sealed, so there is a concern about rain and wind.

If you are a frequent Maintainer and choose the weather to ride in, I don't think you will have a problem.
There is more demerit than meets the eye, so we recommend that you consider your purchase carefully.

In the long run, it would be wise to use Normal air cleaner and NORMAL box as it is. View detail