Reviews
Fits: SYM MMBCU, YAMAHA X-FORCE, YAMAHA FORCE 2.0, SYM DRG
Front Fender feels longer and is replaced.
The product feels less durable than OEM.
Just the right length of Fender that I was interested in.
Self-satisfaction
View detail
Fits: YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA X FORCE, YAMAHA FORCE2.0
Somehow.
It's just a replacement, because I can replace it with 3 Screws. View detail
Light intensity is sufficient for your needs.
I purchased this as a Rear blinker for my HPS300.
The light intensity was sufficient and no Relay replacement etc. was needed.
Use the included Sleeve to tie the wires together. It is not a difficult task, but there is no spare in case of failure, and I have not seen it in Home center, so if you need a spare sleeve, you may want to buy one from Amazon or other places.
It's a personal preference category, but I think Lens is the way to go. [Color] If there is a smoked lens model, I would like to replace it.
View detail
Gold ♪ from the photo ♪
I think it is difficult to replace the bolt on the OEM footpeg with a half-assed tool because the locking agent is effective when removing the bolt from the OEM footpeg. I think it is difficult to replace the footpeg. View detail
Blue text is hard to read.
[How is it used?
Touring Main.
Was the one you received as per Image?
The shape and size were exactly as shown in the Image.
Was the installation difficult?
When crimping Bullet Type Terminals, the wiring is so thin that it is necessary to strip more strands and bend them three times in order to crimp the terminal firmly.
How was your experience with it?
The opening ceremony is Parenthesis good!
[Included Parts:were they on?
Temperature Sensor, Surface Fastener, In-Hemp palm dock, etc., were all needed for installation.
[Was there anything that disappointed you?
The display surface is glossy and the Blue letters are hard to see because of the reflection; Red letters might be easier to see.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Koso mini 3
The product matches the description, the product is not available in Vietnam so you have to wait for shipping from webike Japan at a quite high price. I tested it and it works perfectly. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA cub, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA cub
Pimp to LITTLE CUB (carburetor)
[How is it used?
Normal kick is dirty and needs to be replaced
Was the one you received as per Image?
Plating is thicker and looks better than the photo.
Was the installation difficult?
Just a normal exchange.
How was your experience with it?
I was worried about interference with the Exhaust System, but there is enough room for a Large
I'm using WirusWin's RODExhaust System, but NORMAL would work too.
[Included Parts:were they on?
Screw for fixing
[Was there anything that disappointed you?
I'm a little concerned about it hitting the Side coverretc. because it falls too far inward when it's tipped over.
I have no complaints about this level of quality for a few hundred yen more than the OEM compatible product.
View detail
Somehow.
I am not sure of the effect of the resistance yet, as I have only purchased the motorcycle and am only breaking it in. I replaced the screws because I only had to replace them for the time being. View detail
Fits: YAMAHA VINO125, YAMAHA VINO125, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS)
Good cost performance, durability, and quality
The 6 pieces are under 1000 yen, but the pieces under 13g are finely lineuped in 0.5g increments, with little variation in weight, and the Edge is rounded and carefully finished.
Also, although the durability is not specifically claimed, it is good with almost no wear even after 10,000 km of driving, with only the Light tune level of the drive system and some Engine tinkering.
View detail
Broken and replaced
Sensor broke, so I had to replace it. It didn't last long because of a bad hit. View detail
Psycho ー
It was good. I would definitely recommend! View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI
Finally installed ^^;.
I bought it a long time ago and finally had time to install it.
I don't have to tell you that KOSO is the only one who made it outclassing ^^.
Thanks to the new small Axel opening, the burden on the wrist is reduced and the rider will not get tired even after riding for a long time ^^.
The Gauge that indicates the Axel opening degree also doubles the satisfaction.
As usual, it may be a little expensive, but it's worth buying.
View detail
Fits: YAMAHA BW'S125, YAMAHA BW'S X, YAMAHA BW'S R, YAMAHA BW'S 125, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
It was almost almost Bolt On.
It is a convincing creation, as one would expect from KOSO.
The connection surface with the Cylinder is not distorted at all, and the Injector slot is also very precise, neither loose nor tight, just fit (although it takes a little bit of hang to insert it because it is too just fit).
The only thing that needed to be done was the processing of the OEMBracket shown in the photo, as per Title. Almost Almost." It was Bolt On.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA SMAX[1DK], YAMAHA FORCE155[BH9]
Cool!
Installation is easy and cool.
Minus was slightly distorted.
No problem once installed.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Changed from Red to Black
[How is it used?
The same product in Red was used, but due to the increase in mileage and the change in body colorImage, it was changed to Black.
Was the one you received as per Image?
The bolt has been changed from this product's Included Parts:to Posipolini's M5 Bolt, and the black-colored Filter Frame has been changed to give the image a sense of massiveness.
Black suits Monotone's body color.
Was the installation difficult?
I have been using the bare spec. without OEMAir cleaner cover for some time, so I can replace it with Bolt On.
Since the Bolt on the Left is deep, there is a hole for maintenance on the Cowl, and if the Cap is removed, it is easier to turn the hexagon.
I leave the Cap off because of how often I change it due to weather.
How was your experience with it?
We have been using this product for some time, and when we use a new product immediately after replacement, we feel good about the Response.
It also goes well with the BEAMS R-EVOFull Exhaust System.
The intake sound is pleasant.
We are currently using the higher density Filter of the two Filters.
Since a low-density filter can be replaced by disassembling the filter frame, a new low-density filter will be attached to the removed Red, and the Red will be reused in a form that can be changed depending on the situation.
The filter I used does not have any tears etc., so I think I can reuse it by washing it.
[Included Parts:were they on?
Includes six M5×40mmBolt.
The length is long enough to accommodate the thickness of the OEMCover.
I have changed to Posipolini and am not using it.
The Instruction Manual describes the PowerCheckCurve, and the changes in usage are clearly visible in the Graph.
[Was there anything that disappointed you?
Not to disappoint, but there used to be an inexpensive product that was for sale, without Filter Frame and with only 2 Filters, but now this Quantity:There is only Set.
It would be great if you could resell it since it is a consumable item.
View detail
Buttons are hard, so operating them while driving is a bit dangerous.
There is a clock in the GSR Meter, but since it can only display one thing, I can't see the clock when it is in TRIP view, and it is a pain to switch positions at any time, so I bought this one.
I also bought one with a Thermometer and a voltmeter.
The size is small and good, but the button is just too hard. 。 And at this price of over 6,000 yen, I wanted it to be a radio-controlled watch.
Visibility at night is no problem at all.
The Large Gap on the watch is less than a month, but nothing special.
I think the attached Harness should have been about 300mm longer. 。 It seems that many vehicles probably can't reach LimitBATT, and I couldn't either.
The feeling of using the Others is neither particularly pleasant nor unpleasant, but it is a product that has been sold for a long time, so I think it has a certain reliability.
Personally, I had installed a Kaedere USB with voltage display function separately as a function, so the clock and Thermometer were enough, but this product is connected directly to the BATT, so it is a little fun to see the error.
The Thermometer is installed in a position that does not interfere with Cowl, Destruction and Wiring, but it displays about 2°C higher than the outside temperature system on the road.
I am not sure if this is the correct value or if there is an error in performance, since it is the same no matter how the position is changed, but I am using it as a guide.
And it's usually a clock display.
It is a reasonably priced product and I would like it to last about 3 years.
View detail
Replacement of DAYTONA battery-powered CompactMeter
The 2nd was a battery-powered Daytonacompact temp meter due to malfunctions with Noise. Every time I changed the battery, the nail broke or the battery could not be fixed properly, and I ended up with 3Quantity:I bought a set. I wish I had bought the KOSO set earlier, considering the fact that the DAYTONA set will go into HHH mode if it exceeds 99.9c, making it impossible to measure. I am going to install the Minus at the Body ground and the Plus at the Bullet Terminal with a branch from the Tachometer Wiring. From several people's installation examples, it seems that Noise is not a concern. View detail
Change of Mood.
The exchange was smooth and simple. The color is black, unobtrusive and simple, and the Rubber Packing (Nut blindfold) is also included.
It's good
View detail
Small but easy to see and use!
Since it is a SPMODEL, it is not equipped with any convenient functions such as a clock, and since the crank is heavy, the cell will not turn even if the voltage drops a little, so it was installed for voltage monitoring.
【good point】
Anyway, the body is small, so there is no need to worry about the mounting position.
Back light is bright enough to see well in the Tunnel.
The temperature has little use, but the clock and voltmeter are essential.
[Trouble.
In order to make the power supply extraction SMART, we extended the electric Cable to the Battery installation area by ourselves.
IgnitionON is connected to the Wiring of the ETC, and Always ON is directly connected to the Battery+ terminal.
[Still unclear].
I don't know what happens when it hits the rain.
View detail
Small but easy to see and use!
Since it is a SPMODEL, it is not equipped with any convenient functions such as a clock, and since the crank is heavy, the cell will not turn even if the voltage drops a little, so it was installed for voltage monitoring.
【good point】
Anyway, the body is small, so there is no need to worry about the mounting position.
Back light is bright enough to see well in the Tunnel.
The temperature has little use, but the clock and voltmeter are essential.
[Trouble.
In order to make the power supply extraction SMART, we extended the electric Cable to the Battery installation area by ourselves.
IgnitionON is connected to the Wiring of the ETC, and Always ON is directly connected to the Battery+ terminal.
[Still unclear].
I don't know what happens when it hits the rain.
View detail