Reviews
I'm glad it arrived on the promised date.
It arrived well packaged and intact on the promised date, but the ending was a bit disappointing.
There are places that look broken...
However, it was easy to install and I think it is a very satisfactory product if you are a little careful.
You will be able to see my bike change a lot in just a short amount of time...
I know that the knee grip is better thanks to the shape of the tank cover.
If the knee grip is disappointing, it may be a functional tuning rather than a simple emotional tuning.
-------------------------------------------------- -------- It arrived well packaged and intact on the promised date, but the ending was a bit disappointing. There are places that look broken... However, it was easy to install and I think it is a very satisfactory product if you are a little careful. You will be able to see my bike change a lot in just a short amount of time... I know that the knee grip is better thanks to the shape of the tank cover. If the knee grip is disappointing, it may be a functional tuning rather than a simple emotional tuning. Powered by Google Translator
View detail
s1000rr k67 Material:Twill Weave Carbon
Installed on s1000rr 2020.
The OEM cowl is covered over the OEM cowl and installed with four Bolt On locations.
It is easy to work with and has a great dress-up effect. I like it very much!
View detail
It's pretty~
최고에오About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Saiya Exclusive Screen for Cowl
[How is it used?
Used in YZF-R1 Race base car (2017).
Was the one you received as per Image?
It is exactly as shown in the Image. The manufacturer's thoughtfulness can be seen in the anti-scratch Film that was attached when the product arrived.
Was the installation difficult?
It is an Exclusive Screen for Cowl by the same Manufacturer, so it can only be attached as it is attached.
Rather than fastening the Bolt one by one, it is easier to install the Bolt by first temporarily fastening it sparsely and then tightening it at the end.
How was your experience with it?
The Screen position is higher than OEM, so it is easier to get down in a straight line and the visibility is much better. [Color] I was amazed at the Clear. No distortion at all.
[Included Parts:were they on?
ScreenBody and Screen bolt are included.
View detail
Knee grip is easy!
It was installed with only Circuit use in mind.
It's easier to knee grip.
It looks good.
View detail
I was able to install it on my New Model XSR900 without any problems.
I purchased this product before the New Model XSR900 was released, and I was worried at first that I might not be able to install it.
I wanted to ask a paint shop to install it on my car body color as soon as possible. I didn't have the skill to install it myself, so I asked a Motorcycle shop to do it for me and the labor cost was about 5500 yen.
Before I installed this, it was a foreign-made Under Cowl, but I am very glad that I purchased it because it hides the OEM exhaust system completely, which doubles the goodness of the Parenthesis.
View detail
Fits: KAWASAKI ZX-4R, KAWASAKI ZX-4RR, KAWASAKI ZX-25R
Great sport seating position, good for city as well!
I am 175cm tall, and after installing the seat, I am able to stand on the balls of both my feet. WIth the original seat, I am able to place both feet flat on the ground. The raised seat makes me lean forward slightly more, reminding me to grip the tank with my legs rather than leaning on my wrists. Seating position is more sporty compared to OEM seat, i.e. sitting on top of the bike rather than inside the bike. Comfort is perfectly fine for street. If it is too harsh, perhaps you can adjust the compression and rebound settings on rear shock. Installation is easy - you will have to partially remove the side fairings to access some screws. It is NOT a drop-in replacement. Access to battery and fuses will be inconvenient after installing as you will need to remove fairing, screws and seat mount, before accessing battery and fuses. (It should not matter much but good to know information). Be careful not to strip the OEM bolts near the tank, they are very soft. Deduct one point as rubber seat provided has holes that are not very accurately cut, impacting the positioning somewhat. You might be luckier than me. Product shipped about 1 week earlier than estimated. Overall very satisfied. View detail
Sataniya Tank Pad
The Tank pad design is sleek and aerodynamic, which makes the tank to appear bigger. The tank pad shape is also comfortable to clamp the rider's legs onto ensuring bike control in corners. View detail
This was required after Inner cowl removal of OEMCowl.
[How is it used?
I removed the in-cowl to improve serviceability during MachineMaintenance after the Sports run,
The Meter cannot hold as it is and is used to prevent this.
Was the one you received as per Image?
Simple structure, but functional enough.
Was the installation difficult?
Once the inner cowl is removed, the Bracket itself is easy to install.
How was your experience with it?
The Meter does not shake due to vibration and is very rigid. Durability is yet to be determined.
[Included Parts:were they on?
Screws necessary for installation were included.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Originally designed for racing cowl, but can be installed on OEM OuterCowl.
An Instruction Manual was also included and we had no trouble installing it.
View detail
I don't see the need for it on public roads.
I have not ridden on it yet since it was installed.
The reason for this is that once installed, OEMSeat is no longer available!
View detail
Expectations for Effectiveness
I didn't feel any inconvenience with OEM parts, but I decided to choose Other Brand Product because Tandem seat has poor parenthesis and Single cover is too expensive. I was expecting to be able to install and remove the OEM parts as described, but the size is too small and the installation is unexpectedly large. I wish it was a little easier to install and remove.
Also, the Seat width is wider, so the footing is obviously worse.
View detail
Expected to be effective
The OEM tank is too thin and has a sloping shoulder shape, so it didn't fit well when running in a circuit for about 2 years. The work is done. I've only just put it on the crotch, but it looks great. View detail
I am satisfied with Style.
It is a tightened Style.
It is also a perfect match with the Round Type Bar end mirror.
As a screen, it provides protection to the area under the chin at highway speeds and is in a good position to avoid echoes of turbulence hitting the Helmet and causing it to flop around. (By the way, the shoulders are windy, because they are Slim) The wind cutting sound is reduced and when you are tired of the wind cutting sound, you can take a break by getting down.
Since Unpainting. [Color] It needs to be clear or polished. I am using commercial Spray and SurLuster to polish it to a matte finish and see how it looks. The edges are sharp, so I'm thinking of applying rubber molds afterwards.
The installation was a bit of a puzzle since there are no pictures of the installation in the Instruction Manual, so I removed the OEM headlight cowl and placed it over the lower pointed part of the cowl. I was surprised that the lower part of the Screen did not fit when I first put it on.
Installation is done with the included BoltQuantity:It is 2pc and Bolt On just by co-tightening with Headlight cowl. There was no distortion.
View detail
Increases the sense of Hold.
Compared to OEM, the tank shape is raised so that the body can be held without moving too far forward when breaking.
The use of a tank pad will further reduce slippage and increase the hold feeling. It is especially recommended for those who run Circuit with GunGun.
View detail
Carefully made, beautiful
It is as if they are Japan's leading CowlManufacturer.
Everyone has their own taste in Design and I like this OEM chic. I also like that it is slightly extended!
Fitting may be a little bit necessary, it depends on the item, but I was able to install it without any modification. I was able to install it without modification. The holes are slightly long, so fine adjustment is possible.
View detail
CustomPoint and features selected for your needs.
I think the fit is very good. I am satisfied with the look of Carbon, which is different from Normal. I expect it will be comfortable since the height is slightly higher than the Seat position. I would recommend it to anyone who wants to install such custom parts. However, please understand that this is my personal value. View detail
Recommendation for those who can paint & process
I bought this for APE 50.
Since Saiya's products are made-to-order, you have to wait almost a month for them to arrive.
*Good point
Appearance Installation instructions included
*Notes
GlassWool is ParaPara peeling Dents and scratches
Helmet holder attached to APEFrame interferes with Cowl.
Scratches and dents are a prerequisite for painting.
If you are OK with these, consider purchasing them.
View detail
Good build quality.
The mounting hole position was Exactly.
Only the orientation of the bracket holding the Rear Brake hose was changed.
Black Gel Coating, so it is painted before installation.
View detail
Is good
Installed on a TZr50R. I was informed of the delivery date when I placed the order and it took about 2 weeks to receive it. [Color] The OEM Chain Cover and Brake Hose Bolt was removed because it interfered with the OEM Chain Cover and Brake Hose, but the Chamber and Brake Hose seemed to hit each other, so the Hose was fixed to the Fender's Mesh with Tie Wrap. I am satisfied with the new look of the Rear. View detail
For Paint Base
[How is it used?
I was going to install a Chinese Cowl on my MC21, but after waiting for it to arrive after ordering, I cancelled the order and chose Saiya.
The OEM used Cowl is now enough to buy one Scooter....
Was the one you received as per Image?
Upper and SIDE (Under integrated) Of Quantity:Consists of 1 Set of 3pcs.
Screws and Nut for installation were included as described.
The finish of the paint is good because it is a gel coat that is supposed to be painted, but there are foreign objects on the edges. (probably a pool of FRP resin) The workmanship was not perfect, to be honest, because there were
Was the installation difficult?
In past Impressions, it was mentioned that the mounting holes on the Upper and SIDE were misaligned, but I had no problem with that.
Screws for fixing without any additional drilling (both with the body side, of course) could be fixed. (The photo shows a temporary fastening, so some parts may not be attached.)
However, Headlight could not be installed no matter how hard I tried, so I redrilled the fixing holes.
Also, unlike OEM, there are fewer Product Contents, which is good for ease of installation, but all SIDE and UNDER parts must be removed for maintenance.
How was your experience with it?
Material:The FRP is strong, so it is not at all PeLePera like Chinese Cowl.
As for the CowlDesign aspect, it is somewhat similar to OEM, so it is recommended for both preserving valuable OEMCowls and for Restore of vehicles without Cowl.
As expected, White Gel will float if left as is, so it would be good for those who can paint to some extent.
[Included Parts:were they on?
Screws and Nuts are included, but some of the fixing Rivet for the Screen and Fixing Screws to the car body are required separately.
[Was there anything that disappointed you?
It would have been a perfect score if only the finish on the edge and the position of the hole for the Headlight could be improved.
【Review】
Material:It is good that the FRP is strong and has little risk of breakage.
Although external cowl always has a hole position problem, I was able to install the cowl without any difficulty.
Since OEMCowls are becoming more and more difficult to obtain, it is quite nice to paint FRP Cowl in your own way.
View detail