Reviews
good item
The genuine cover needs to be torn off and mounted. It was a little hard to just mount, so I mounted it at a nearby dealership. View detail
the best dress-up item
It's my 3rd generation of z900 rs, and I must wear it when I buy it. Honestly, it's true that it doesn't have a protective effect, but it has a very big dress-up effect. I recommend it. View detail
the best dress-up item
Honestly, it's true that there's no protective effect, but the dress-up effect is very big. I recommend it. This is a product that I've owned for 3rd generation of z900rs and must wear when purchasing. View detail
Be careful when installing!
The product is Large and satisfactory, but the Bolt On seems to be easy to use. However, when removing the OEMBolt, I had to be very careful to support the Engine with a Jack and remove the Bolt, but the Frame and Engine still gapped a little.
The center of the bolt is gapped.
In the end, I took it to the Shop and asked for it. 。
SliderManufacturer or not, we think it is better to leave it to the Shop, as we think it is very difficult to install.
View detail
Used for CB750rc42
I did some research and found out that this product for CBX400F fits CB750rc42, so I installed it immediately.
Simply remove the O-Ring on the original Oil Temperature Meter and install it.
It was Exactly
It's an air-cooled Engine, so it's a necessity to avoid Overheat in summer traffic jams and such!
The engine of rc42 was originally a CBX750F engine, so I removed the filler cap on the Left Side and put it on.
View detail
Fits: HONDA CB750 Fore (CB750K), HONDA CB750 Fore (CB750K), HONDA CB750 Fore (CB750K)
HayashiCasting
Hayashi Casting is indeed cool. View detail
Fits: HONDA MONKEY, HONDA C50, HONDA C70, HONDA Ape 100, HONDA Ape 50, HONDA cubic series, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Super Cub 90, HONDA dachshund, HONDA C50, HONDA C70, HONDA Ape 100, HONDA Ape 50, HONDA cubic series, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Super Cub 90, HONDA dachshund
Oil Temperature Meter for CROSS CUB
Simply remove the oil plug cum Level gauge and replace it with this product.
The temperature-sensing part does not directly enter the oil, but measures the temperature of the scattered oil that adheres to it.
It is not known if the temperature is reliably measured.
View detail
Practical & good looking
These are of a nice elegantly simple design that compliments the location near the radiator. They come with a rubber seal that seems to secure the item in place adequately, once fitted. Make sure the plug is pushed in all the way, I noticed I hadn't pushed mine fully into place until after I'd been for a long ride. View detail
Fine items are helpful.
Since rubber packing and grommets like this are consumable items, it would be great if you could have a better selection.
I haven't replaced it yet.
I would like to see Fuel Cap Packing for Z1R made soon.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100
Perfect DOCH emblem
Perfect quality, superb rendering, you might just need a template to position it in the right place
I am very satisfied with my purchase -------------------------------------------- --------------- Perfect quality, superb rendering, it would just be necessary to be a template to position it in the right place I am very satisfied with my purchase Powered by Google Translator
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RSCafe, KAWASAKI Z900RS, KAWASAKI Z900RSCafe
cafeBracket installed on RS
I purchased this bracket for my Z900RS with a Bikini cowl so that there would be no interference with the bracket. The existing Bikini cowl bracket seemed to be large and strong, but when I installed it, the gap was too narrow and it was hard to tighten the screws.
I'm a little concerned about the gap so maybe I'll go back to the original Bracket, I think it's essential depending on the shape of the Cowl.
View detail
I'm glad I bought it
I bought this because I was a little lonely around Stem.
The Stem area is now hidden in a nice and stylish way.
View detail
Very cool
Very cool little temperature gauge. The gauge seems really well built. I find that to be common with Doremi products! It's a nice, but functional, little piece of bling! View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB400SF SPECIII
Good product as long as the connector fits
There are several similar LED Tail Lamps sold by HONDA, AP something, Posh, DOREMI, and others.
I looked at many installation articles and youtube, and Posh was the best choice for me, but it was also the most expensive. Of course, I don't know if they are made in Japan or not, but I was thinking of going with DOREMI because Posh and DOREMI at the top seemed somewhat trustworthy, but then I saw them on Yahoo Auctions at a price that looked like they were made in China, so I bought them. (It was DOREMI no matter how you look at it from the picture and the color of the cord)
It said something like "Connector needs to be replaced depending on the year …" but I thought I could probably pimp it out, but unfortunately, my 2011 CB400SB (NC42-130) had the wrong Connector and I immediately went to AMAZON and I ordered DAYTONAHMWaterproof Connector. (Webike is cheaper, but I needed a Large connector as soon as possible.)
I thought I had done a lot of research to make sure I connected the right way, but when I finally finished and tried it out, I found that the connection was not correct. Stop-lamp won't work!!!!"
Honda Motorcycle is Yellow/Green, Green, White/Green, DOREMI is Red, Yellow, Black... I went back to the Net and checked Q&A. The more I looked, the more exceptional answers came up, and I was at my wit's end. So I called the DOREMI head office and asked them to look into it. (They were very polite!). In the end, the answer was Red is for when you step on the Brake, Yellow is for the Tail lamp that is always on, and Black is for Earth. It is certainly the most imaginative shade. It is certainly the easiest shade to imagine. Then the complication is Honda, but I was able to work that out through research.
I took it apart again and looked at it carefully, and found that the black color of Earth was correct, but the red and yellow colors were reversed.
Thanks to the person who answered the phone at DOREMI headquarters, the Stop-lamp now lights up properly. （Thank you very much for your help on the phone at the DOREMI head office.:(I think it would be great if it was a Set)
I know it's a bit presumptuous of me to post my impressions of the DOREMILED Tail Lamp without having bought it from Webike, but I thought it might be troublesome if someone new to MotorcycleMachine, like me, decides to replace it with this product on his/her own. I thought I'd post my impressions.
The product itself is very nice, with the Cushion Tape attached from the beginning and the same size as the original OEM product. So, I have no complaints about the product itself, but the Connector that can convert from 3Pin connector to HMWaterproof Connector is not available in quantity.:I think it would be perfect if it were a Set.
Blinker about a month ago. [Color] I replaced it with Clear and now the Tail lamp. [Color] Since I decided on Clear, I think the color unifies the WhiteSilver CB400SB and makes it look awesome and fearless. I am very satisfied with the result.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS
Beautiful pipes
These look and sound absolutely beautiful! The chrome plating is very nice. The install was a little challenging because the instructions are only in Japanese, but the parts diagram is fairly clear on the layout of the pipes and hardware. Nice unique exhaust note. Very retro sounding. View detail
Like oem quality
I used these to install the Doremi 4-4 system on my bike. They seem like good quality. Be sure to use a small amount of exhaust silicone to hold them in place before installing header pipes. No leaks after install! View detail
As expected from DOREMI.
I have been wanting this part for a long time, so I have no comment other than I am satisfied. View detail
Good cosmetic.
There are several similar products, but this one is the cheapest.
Hard to fit the letter of Kawasaki.
It is time-consuming to take BALI of the letters.
View detail
Fits: KAWASAKI 650RS, KAWASAKI 650-W1, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 350SS, KAWASAKI 400SS, KAWASAKI 400SS, KAWASAKI 500SS, KAWASAKI 500SS, KAWASAKI 500SS, KAWASAKI 750SS, KAWASAKI 750SS, KAWASAKI KH250, KAWASAKI KH400, KAWASAKI KH500, KAWASAKI Z2, KAWASAKI Z1, KAWASAKI KH250
We can only be thankful that we have Parts….
It functions as a Blinker Bracket.
The shape is completely different from that of the OEMBracket.
That's the fate of Ripro products, we should be thankful that Parts is sold.
We do not recommend this product for the finicky or nervous person.
View detail
Fits: HONDA CB750F, HONDA CB1100R, HONDA CB1100 type R-18 inch
Don't seek OEM quality, after all, it's Other Brand Product.
I was attracted by the brand name "DOREMI COLLECTION" and purchased it, but the packing of the Lens is not rubbery but sponge-like. I wonder if it is made in China after all. I tried to re-cut the screw part with a tap, but there was no tap that fit the screw hole, so I re-cut the groove in a different way. Since the product is cheap, it might be better to think of it as a replacement for the OEM one in case of emergency. View detail