Reviews
Good
I use it for 250 Oil replacement.
It comes with gloves, so I think it is a very friendly product. However, I am not using it because I am using something else.
View detail
For Oil processing
[How is it used?
I purchased the Oilfor Replacement for the Grom along with Oil.
How was your experience with it?
Thankfully gloves and Band are included.
Oil was also dumped without leaking.
How did it compare to other products?
Unknown, as it has not been used for anything else.
[Points to note]
I would not recommend it in windy places, with a little regret,
View detail
Oil change
Convenient for disposal of waste oil when changing Mission oil.
The capacity is also helpful because it absorbs several times.
It also helps that it can be thrown away as is.
After absorbing waste oil, it becomes black with dirt anyway, so it is good to be able to use it after cleaning instead of Waist.
View detail
historical legacy
Wow, so many people writing imprements on just Nozzle!
When I was on my 2nd, I kept a 1 liter can at the fueling port in the back of the car. Replenishment." The best time to do this was when I was
We didn't weigh the Levels exactly, and it was routine to dispose of the entire can after 3 or 4 refills (and it was free back then).
On the other hand, when pouring more than 3Liter in 4st Engine oil change, there is not much Merit.
It would be much faster to transfer the required amount to a jug or use Bellows long funnel...
But there is something quaint about attaching it to the mouth of the G1 one at a time and waiting for the last drop to fall out.
I think it is a gem that has supported Sunday Motorcycle.
View detail
I appreciate that it comes with gloves.
[How is it used?
I've used it twice.
Was the one you received as per Image?
As shown in the picture. Gloves are included.
How was your experience with it?
I used it without any complaints.
After use, just put it in the corrugated ball and throw it away as is, so if you do it right, you can change the Oil without getting your hands dirty.
The price is not too expensive and I would buy it again.
[Points to note]
Not particularly
How did it compare to other products?
Compared to Littering packs, etc., it is a tiered ball, so it takes up a little more space.
View detail
Nozzle
I think the product is good.
I changed the engine oil for the first time in about 10 years.
I was very enthusiastic, but the oil leaked out of the BWS125 because the place where the engine oil is put in is at an angle.
Next time I will use Funnel. But my hands get dirty too, so I may leave it to Shop.
View detail
Oil Treatment
The Large was just right and worked without any problems.
It is kind with gloves and Band.
View detail
Large capacity for peace of mind
It is a product of necessary and sufficient functions at the time of Oil replacement.
I use Addressv125g with Oil replacement, but it would be easier to use if the box was a little lower. I pull the Oil out of the Strainer every time.
Incidentally, I commute 1.3 km each way to work, and since the annual mileage of the Motorcycle is about 600 km and emulsifies, I change the oil about every 300 km.
View detail
Thanks for the help. ??
A necessity in Oil exchange.
It is helpful to be able to dispose of it in the home Garbage.
The price is reasonable and I am satisfied with the cosmetics.
View detail
1.I wish I had a 5L one.
In my oil replacement environment, 1.5L is just right, but 2L will still be enough, so I mix waste oil such as tempura oil and dispose of it.
In fact, I was thinking that a suitable waste oil box from the Homesensee would have been fine, but since it functioned fine, I decided to continue to purchase it along with Oil.
View detail
Easy to dispose of garbage
Purchased for my first Oil replacement.
I don't know about you, but I was impressed that I could smoke a lot of dirty Oil and throw it away like this.
The cospa is also the best!
View detail
Used for oil exchange
[How is it used?
Used for oil exchange
How was your experience with it?
Compared to 2L, the size is Large, so even if some Oil flew out, it was Large sturdy.
It is useful because it can be thrown away as is.
It is easy to use with Motorcycle with height.
View detail
For use when replacing Oil
I purchased it at the same time as Oil for oil change work.
We selected this product from LINK on the Oil Purchase Page, which seemed to have good cost performance.
It worked fine
View detail
It's enough
This is a great product for discarding Oil. View detail
Cospa good
There is no problem regarding disposal of waste oil for motorcycle use. View detail
It is now one of the Items required for Oil Replacement!
[How is it used?
I purchased this product to be used once a year when changing Oil.
It is less than 4 liters to replace Oil in CB1100, so it is enough for your needs.
How was your experience with it?
It can be used without any problems. It might be easier to use if it were a little thinner, laying on the bottom, but it never didn't fit.
Oil absorption is also absorbed to a level that is not a problem after a while.
How did it compare to other products?
I think they are comparable to Emon's. I appreciate the Vinyl gloves, but I wonder if that is reflected in the price.
[Points to note]
Those who normally perform maintenance should have no problem at all.
If you are not familiar with it, you may shake it and spill the oil when you take the last bit of oil out of the body. It might be easier to use a more shallow bottom and Large size.
I think it is inevitable that not only oil but also other products like this will increase in price due to the rising cost of materials. I think it is better to buy in bulk to some extent.
View detail
To dispose of Oil
Oil replacement is easy but disposal of old Oil is Large strange.
LargeIn the past, service stations would dispose of it for free, but not anymore. However, it is completely OUT of the question to throw them into the sewage system.
For this reason, I used to put a Vinyl bag in a corrugated ball and fill it with used Dustcloth and let it absorb Oil.
The same logic applies to this product. At first, people around me thought I was crazy to pay Gold for such a product, but now it is always used for oil replacement.
There are a variety of absorbent materials thanks to the increasing number and variety of Manufacturers who produce them. Mixed-color cutting cloth and Color:Some products use Gray dust cotton-like absorbent material. WeBig's is a White absorbent material, so you can see the color of old Oil.
It is easy to use and comes with gloves and Tie Wrap.
Note, however, that the Garbage disposal specification changes depending on the region.
View detail
Necessities when changing Oil
This is the first time I have used this product, and it is a convenient product that fits tightly into the mouth of Honda's UltraG1 and can be disposed of as is.
However, if the engine is a Vertical TypeEngine and refueling is done from above, the nozzle part is a little short, and there were times when the oil would spill unless the kick pedal was removed on my vehicle.
I would be more than happy to have a longer Nozzle as a separate Spec.
View detail
Large doubles as Small
I had a previous experience when I used the 2.5L to treat 2.2L and it did not absorb well and leaked, so I decided to use the 4.5L to give myself more room.
Thanks to this, we were able to handle the process with no problems at all.
View detail
Cheap Oil nozzle
If oil is poured directly into a motorcycle, there is a risk of spilling it, so it is safe to add a nozzle.
I bought this product because it was recommended to me. There is nothing special about it, but I think it is a product that can be recommended to everyone because it is inexpensive and has no problems in use.
View detail