Reviews
An Experience I Learned Firsthand (;・∀・)
When I bought SR400, British custom was the mainstream, and I also liked to install CABTON Exhaust System. Of course, I was young, so it does not correspond to Japanese Vehicle Inspection.
I had put it on without carburetor setting....
This is what happens.
Symptoms
Idling Rotational instability
I thought the ▲ sound was dull→Cool. (;・∀・)
▲ inadvertently stalls→ mistakenly thinking this is a taste (-_-;)
▲AfterFire a series of fires during embrasure
I would be ashamed of myself today.
Cause
The resistance of the Exhaust System changes against the intake from the air cleanerretc. and the adjustment of the Carburetor is out of setting.
→The point is that the balance of the combination of a good exhaust system + normal air cleaner is bad and the fuel mixture is out of balance.
It means that the mixture is thin.
As expected, I couldn't ride the car as it was, so I decided to try Carburetor setting (laugh).
Carburetor setting
The method of adjusting the ratio of air/fuel mixing (air-fuel ratio) in the engine. 。 If the air-fuel ratio is not right, the fuel cannot be burned properly and the engine will not be able to deliver enough power 。
In the worst case, it will lead to Engine failure.
The parts used in the Carburetor setting and their roles.
1:Main jet →Large action around Axel opening 50%~.
2:Slow Jet (Pilot Jet) →Engine hangs and affects running at low openings.
3:Air Screw (Pilot screw) →Since the scope of responsibility is covered by Slow Jet, if the Setting does not appear by adjusting Screw, the Jet is replaced, and so on.
4:JetNeedle clip step→Clip step up makes it thinner, clip step down makes it darker effect. 。 Adjust the sharpness of the blow-off from a physical point of view.
I thought I'd try 3 and if it didn't work, I'd try 2. →3 didn't work (laughs), so I tried 2.
Incidentally
What are the symptoms of a thin Pilot Jet? Throttle opening 1/8 to 1/2 →.
Breathing, Knocking, Stalling, Staggering, Lagging, Rattling, Poor acceleration Dark Idling Unstable rotation Light Idling Black smoke, Dull sound, Stalled after a while......just the way it is (laughs)
There are three types of Pilot Jet here.
・#48
・#50
・#52
The standard was 42.5 so I will try from the darker side.
Here's how each one turned out.
No afterfire or stalls.
... ##50→Engine takes, but Plug is completely Black.
... ##52→ Too dense to be Engine.
After that, when I ran, the explosion naturally eased up and I was in good shape (lol).
good point
◎Main jet:6 types from 165-190, Pilot Jet:3 types from 48-52:The number of component points that are in Set, so you don't have to worry about Setting with OEMcarburetor.
◎They are easy to obtain, which is helpful for Setting beginners. It is difficult to get Jet individually.
Point
You should check the number of OEM or current Main jet and Pilot Jet. It will give you an idea of what to do from the current situation.
It is better to have several plugs, because it is difficult to reuse a plug if it is too dark and too black, because the burn color of the plug confirms the Setting.
If it is a single cylinder, you can do it by yourself because it is only one carburetor. Especially if you have an external exhaust system and it is not working well, I think you should do the setting.
View detail
Used as Bracket for Switch on Grip heater
The Bracket that was originally attached was too long and was bent at the Prank, breaking it off at the base.
This time, I don't think it will be tampered with because the base LARGE size and height of the base are just right and not uncomfortable.
View detail
No sense of retrofitting
Since the frame is black in color, there is almost no sense of retrofitting. We expect the rest to be durable against paint peeling, etc. View detail
Rigidity is solid.
Quick release braceShaft Type2 requires Quick Release Brace Clamp (sold separately).
You can also choose from a variety of color variations, so you can change the color of the Clamp and Shaft.
It is different from paint-like gloss.
Mounting is Clamp's ScrewQuantity:Fixed with 2pc
View detail
Match the color of the car body.
Deep orange was selected to match the body color Orange.
PackageThe color before opening the package looks somewhat Orange or Red under the light.
Easy installation on vehicle body with only M6 cap bolt
Under sunlight, the Orange color was consistent with the color of the car body.
No BALI, etc. and quality seems good.
View detail
Buy Titanium
It was installed in a nice way. I am satisfied. View detail
Fits: HONDA FORZA, SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900
Too big?
Too much presence in the smallest groms.
But when it runs, the Handlebar Chatter is gone.
I feel more secure while driving.
View detail
Fits: HONDA FORZA, SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900
Needed for CBR650R
The CBR650R has quite a lot of vibration, so the Weight will reduce it considerably and make it easier to ride!
The OEM bar end is equipped with a screw lock material, which is only a little difficult to remove, but the installation itself is very easy.
There are many different colors to choose from.
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZX14R, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZZR1400
Just fit!
Since Bar End has been purchasing this Manufacturer for a long time,
We have long been aware of the quality of the product. This time, the vibration of the two-cylinder Engine
I purchased this product to take out. I am satisfied with the firm installation.
View detail
Finished better than expected
Change from ActiveLoad Bar (Medium).
I didn't want to change the position, especially Large, but Active was strangely overpriced, and Posh was cheaper, so I went with it.
Both are made of steel (to prevent bending in the event of a fall).
Used for NSR50 with Gymkhana and Mini circuit driving as main.
The active ratio is the same for Plating, but this one has a more beautiful shine.
I'm not familiar with Gold processing, so I don't know the details, but when you flip through the Package "Oh." It was so different that I thought it was a good idea.
As for the Position, I can't say, since it is based on personal physique and preference, but it is for reference.
Almost the same dimensions as Active (Medium), but with less aperture angle.
This is recommended for those who prefer the open eye position.
The hanging angles were almost the same as seen, and the widths were also almost the same when lined up.
Other than the aperture angle, it is about the same in Catalog, so this is a good choice for those who only want to change that aspect of the camera.
I have the impression that it is a natural position without Habit.
View detail
Reliable Brand
The blinker has not been replaced yet, so I will not be able to check the operation until it is installed. View detail
Got my moneys worth for the look alone
I'd wanted the black one, but as it wasn't available- I got titanium instead...it actually looks really good to my eye. The design of the shroud does restrict access to the front mounting point for crash knobs etc- in particular the right hand side. I had to remove my 'trickstar' sliders so the shroud would fit. As for an improvement to airflow around the radiator, I got no idea..sometimes I could almost swear the engine runs hotter- so, who knows? But all that aside, I think they are well worth the money even as just as "dress-up" item. View detail
Exactly
Mounting on Hose end
It's good to dress-up a bit.
View detail
Fits: KAWASAKI Z1000, KAWASAKI Z250, KAWASAKI Z800, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZX-6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA250R, KAWASAKI Z1000, KAWASAKI Z250, KAWASAKI Z800, KAWASAKI NINJA400R
The calm coloring and classical atmosphere are good!
Quantity:1 Set of 2pcs. so Quantity:I bought 2 sets
Installation is no problem, but since the Screw holes are not cut, it would be better to fit them properly and turn the Screw carefully when installing. It took about 15 minutes for four pieces.
I was satisfied with the dark, subdued color as per Image.
View detail
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI V-STROAM650XT, SUZUKI V-STROAM650, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050, SUZUKI GSX-S1000GT, SUZUKI GSX250R, SUZUKI BURGMAN400, SUZUKI V-STROAM, SUZUKI GSX-S1000S, SUZUKI GSX-S1000
Buy ja59
I wanted to install a low thickness bar end on my ja59, so after removing the OEM bar end, I tried to install it, but it was not possible.
I think I can install it by cutting and shortening the bar end fixing part, but I think I will save it for another motorcycle this time.
I learned a lot, I couldn't install it, but the design is good and I am satisfied with the product!
View detail
inconspicuous (Compliment.)
The quality is high!
I chose Black to give a sense of unity, but with this size, you may want to use a flashy color as an accent color.
The price is for one, so I think it is a little expensive, but I am satisfied with it.
View detail
BlackScrew
I purchased this to install a GIVI Top case. It looks tighter. View detail
Small ObjectsParts
These parts are useful if you keep them in your parts box. View detail
Compact Cargo Hook
It does not protrude more than the Clubba and fits better. The Net Hook should be more compact to fit in the case of the Clubba. I used the same Posh face color SpoolM8x30mm and Stainless boltM8x105mm. View detail
inconspicuous (Compliment.)
Perfect Fitting View detail