Reviews
Repurchase
SizeDown and repurchased, just right. View detail
ER-6F Ethos Design Aluminum Banjo Bolt Single
[How is it used?
Used to install the ACPerformance line, and while it was hard to find a Double in Gold, Ethos Design was selling it, so I bought a Single to go with it.
Was the one you received as per Image?
Yes.
Was the installation difficult?
Bolt itself is normal.
How was your experience with it?
Looks a little more glamorous.
[Included Parts:were they on?
Two Washers.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
The kit for the Point and hang/ACPerformance line is 13mm, and this one is 12mm. Therefore, it is necessary to change the socket of the Torque wrench.
Availability and clarity of Instruction Manual/No. Naturally so.
Note/As above, if you make a mistake and turn it at 13mm, you will lick it.
Items to buy together/A set of tools.
Opinions and requests to Manufacturer It would be nice to have Stainless Steel Gold.
View detail
For domestic cars, the included color is sufficient.
If it is to be used on a domestic car, I think the included colors will cover it.
There is a Bolt for fixing on the STAND side, but there is no Screw hole on the Adapter, so it is easy to come off.
View detail
Dream rear stand
Very well made rear stand. Easy to use. Unfortunately due to tight construction, rear wheel can't be turned while bike on stand. Otherwise I'm very happy with this product View detail
First time purchasing Gloves for TRIAL
TRIAL, I have been attending School with the for On Road Gloves that I normally use, but I also purchased Gloves for TRIAL.
The product was recommended by a friend.
I heard that it is less tiring, but I don't know how effective it is because I haven't ridden it enough to tire my hands...,
However, I am not used to the bumps on my palms, so when I get off the motorcycle, the bumps get caught and the Axel spins.
In my case, it will take some time to get used to it.
The texture itself is familiar.
View detail
Best gloves especially for OffLoader
I have used various gloves on mountain bikes and off-road motorcycles over the years, and these were the most comfortable in terms of fit and operation, and they were inexpensive, and I would buy them again if I could, but I'm afraid they are no longer available...
Most large gloves have a gap that moves and rustles between the hand and the grips, which spoils the sense of unity between the grips and the hand, and tends to cause blisters on the hand, which I had half given up on as a matter of course, but these gloves are different.
Anyway, the handlebar fits well in the hand and does not feel gapped when gripping the grips.
I think it is no exaggeration to say that these are the best motorcycle gloves beyond mere cost performance.
View detail
Pleasantly pompous and pompous.
The 2nd one has to be like this! It is fun to shift up and down. I rarely drop down to 1st gear even when riding on the street. But when I drive in Bypass, I don't go into 6th gear. It feels just right. View detail
One can be used for air bites, maybe.
Brake fluid is replaced and used to drain the fluid when air bites.
Once the Brake is inserted into the loop, it can be fastened with a special pin or tied with a needle gold so that it cannot be wiped off.
The front side of the tank is above the tank and gravity will cause it to fall down to a certain extent, but the rear side is almost parallel to the tank, so it is sometimes difficult to get out the tank.
It is a delicate item.
If it is completely air bitten and the Lever and Pedal are completely scoured, there will be no Fluid because there is no pushing force. This syringe type aspirate is not powerful enough.
At that time, if you can connect VacuumGoods or something, you can make it work, but if not, just take it to the shop. (Lol)
They did a full Route exchange at Red Baron for $3,160 for just the Rear. (Lol)
View detail
Fits: MONTESA 4RT COTA, MONTESA 4RT COTA, MONTESA 4RT COTA, HONDA RTL250, MONTESA COTA 4RT 300 RR, HONDA RTL300R, HONDA RTL260F, HONDA CRF450R, HONDA CRF250R, HONDA CRF150R, MONTESA COTA 4RT 300 RR, HONDA RTL300R, HONDA RTL260F, HONDA CRF450R, HONDA CRF250R, HONDA CRF150R
Cospar good
I am running Circuit on a CRF450R MOTARDSpec. with no problems.
I don't know about the claimed effect on my torso, but I appreciate the fact that I can use the oil since I change it every other run.
View detail
TR81 Successor MODEL
The TR81 I used to use was good, and I liked the design, so I decided to use this successor model because it is the same. It is not bad in terms of comfort, operability, and detachment.
They also hold up reasonably well in terms of durability.
View detail
Reduces hand fatigue
The mysterious knob on the palm of my hand that reduces hand fatigue, but does it work? I used it as a trial.
When you start using it, it feels a little uncomfortable, but you get used to it. It feels a little uncomfortable at first, but once you get used to it, it seems to be fine. It is true that there is a reduction? It seems to be good once you get used to it.
The design is not bad, so I am just hoping for durability.
View detail
Fits: HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 100, HONDA XR100 Motard
Catch Tank
About quality and texture have the right components About the feeling of use Now you can relax when you start a quick drive I think I can be free from the smell of gasoline Products to buy together Required with 6mm hose option Difficulty of installation have a good explanation Cost performance and comparison with other products It's a typical catch today at a good price About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I couldn't set it up as described The engine oil cooler was installed at the installation site, so it was originally moved to the intake air container View detail
Preliminary Tank
Used for mower The angle of the Pipe at the oil supply port is just right easy to use. View detail
Preliminary Tank
The design is great, but I have a few complaints.
(sentence end) indicates emphasis, agreement, request for confirmation, etc.
View detail
Gloves
Design, fabric and looked good, so I bought it.
I was a little worried because I thought it would be better than Small size since there was only Large size, but surprisingly, I could use it on One size with just a good feeling of usability and usability. I hope it will last for a long time in terms of durability.
View detail
new
The fingers of the Gloves I was using were torn, so I purchased new ones here. The fabric and construction are solid, and the Gloves are a wonder that my hands do not get tired. AssistPad. The design is good and I like it. View detail
It was used for the dress-up of a tank and a fender up.
It was used for the dress-up of a tank and a fender up. View detail
Large Size!
I could not choose the design for the Large size, so I just wanted the size to fit, but I found a product with a perfect size and design and I am satisfied with the Large change.
If I had my way, I'd like to be able to operate my phone while wearing it!
View detail
Just in case.
I bought this to alleviate my fear of running out of Gas since it does not have a fuel gauge. I like the quality and feel of the product. The durability needs to be checked in the future. View detail
Easy to bleed air
It is easy to bleed air when used for maintenance of the brake.
It is also very helpful because it can be done in a short amount of time and can be done reliably.
View detail