Reviews
cylinder piston group
Good afternoon, I received it today, I like everything. The quality is up to par. Delivery ahead of time. Thanks guys. They put a full set of gaskets, a finger View detail
![Seat Cover (High Quality Type) [SY-001V]](https://img.webike-cdn.net/catalogue/images/13570/36142917_TS.jpg)
Fits: YAMAHA VINO, YAMAHA VINO
It's Recommendation because of the quality!
My brother-in-law's Scooter (VINO) Seat was torn, so I reupholstered it for him. The fabric stretches well so it is easy to pull and put up! It is also durable, so it doesn't hurt at all even if I get in and out of the car every day! It's a recommendation because it makes the dirty Seat look like new! View detail
Fits: HONDA Today, HONDA Today, HONDA DIO(4Cycle), HONDA DIO(4Cycle)
Repair is completed at a low cost!
Installed on ThirdMotorcycle's Today that goes to the nearby Convenience, replacing an OEM OEMRear Suspension that had been scuffed up and deteriorated. The price is very low, but I have had no problems with it! I am Large satisfied with the low price and the refresh! View detail
Cowl mounting holes do not fit
Paint quality is good. It makes it look like a new car! I had to force it on with Tie Wrap or re-drill the holes … I think it may have been an individual mistake, but … I drilled the holes with a Drill and installed it. If you can install it, you will be supremely satisfied. View detail
Poof, a new car!
While replacing and repairing the keyhole of my father's APRIO, which was the victim of an attempted theft, I also replaced the cowl! This is a very large cowl! The old OEM cowl was reborn as a shiny new cowl, and it feels like a new car! If you look closely, you can see that there was some dust in the cowl and the mounting holes did not fit slightly, but it is just a matter of widening the holes and doing some other simple things! The material of the Cowl is not Pe LePera, but the same level of strength as OEM! This is really a Recommendation! View detail
fitment issues
I was excited to recieve this poduct. There are a few fitment issues with these plastics for my af27 dio. The front piece the 4 bolts on the back side only two line up the other two are so far off would need to enlarge holes to make it work. The top headlight piece does not fit well pops out on the one side and on the middle. The rear pieces seems to fit alittle better but not the best. View detail
![Seat Cover (High Quality Type) [SY-107V]](https://img.webike-cdn.net/catalogue/images/13570/43554024_TS.jpg)
Fits: YAMAHA SEROW225, YAMAHA SEROW225
The fabric is slightly thicker than the company's SY-107Type.
[How is it used?
We decided to reupholster the seat of a 1997 SEROW225 WE that we acquired two years ago. The seat had originally deteriorated, but due to playing in the mountains, etc., the surface skin had reached its limit.
I searched Webike for Seat fabric to reupholster. MotorcyclePartsCenter. There were only two products available, both in the same color scheme as the OEMSeat type, and I was torn between buying one or the other, so I decided to buy both because they were cheaper.
This time in Webike's product introduction section. "High quality" It was described as (Price at time of purchase:3,150 yen) This will be a review of Seat fabrics in the "Seat fabrics" section.
How did you like it?
As I said above. SY-107V (High Quality Type) When SY-107. (Standard Type) The Standard Type was actually used for the Seat reupholstery work, as we purchased the Seat fabric at the same time as the Standard Type.
If I write honestly. If you weren't told, you couldn't tell them apart just by looking at them." and if you touch it, you'll find that the high quality Type is more like A little thicker?" It was like
Well, the price of Standard Type is 2,830 yen and High Quality Type is 3,150 yen, and the difference is only 320 yen.
When it was listed in the introduction section. The higher one is shiny. The cheaper one is WITHOUT Gloss. However, the actual product arrived in a semi-glossy condition, and although it is hard to tell the difference just by looking at the product, the thickness of the fabric is enough to make the product look like a "good" product. High-Quality Type may last a little longer.
I would like to replace the surface skin of my current Standard Type with this product when it becomes useless.
How did it compare to other products?
Compared to the Standard Type SY107, which I purchased at the same time, if there is a price difference of 320 yen, would it be better to purchase this product, SY107V?
Incidentally, as of February 2024, YamahaOEM's Seat assembly. is no longer available, but you can still purchase it at Seat CoverSingle Item! (17,380 yen) 。
Even though the fabric is a little thicker than the Standard Type, it is not as good as YamahaOEM's Seat fabric, but considering the price, I think this product is well worth purchasing.
[Points to note]
When reupholstering, if the Tucker is driven in halfway, there is a risk that the fabric will break from there.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
I usually post PartsReview with hanghang and use my WebikePoints that I have saved up, so I can buy them at Webike. SEROW225. The only two types of Seat fabric for reupholstery for the new car were available in MotorcyclePartsCenter's lineup.
(Seat fabric from Universal Product was not an option because we wanted to use the same color pattern as the OEM.)
[How is it used?
I enjoy all kinds of Situations, from everyday city driving to mountain play.
【Included Parts:presence or absence】.
Seat CoverQuantity:1 pc. only, this one also did not have Tandem belt, 1995 (4JG2) From SEROW225 W onward, Tandem belt is not included even in OEM, so there is no problem.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
Vinyl bag with large diameter to prevent flooding of the seat sponge (Large sturdy with Vinyl bags for Garbage collection) is different for each person, so those who use it should purchase it while they are at it.
In my case, I do not use Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
I honestly think it would be better to use this product as a 1 pc system. I would like to continue to use Lineup, but I am thankful that I have a choice.
View detail
![Seat Cover [SY-107]](https://img.webike-cdn.net/catalogue/images/13570/3535950_TS.jpg)
Cheap, thin, but usable.
[How is it used?
This 1997 SEROW225WE, which I acquired two years ago, was purchased by an acquaintance of mine six years ago, and I had done a fair amount of repair work on it when I bought it six years ago.
After receiving it the year before last, we prioritized restoration from a functional point of view, but the Seat Cover, which was originally on the verge of unraveling because it had been used for playing in the mountains during that time, had reached its limit.
I searched Webike for Seat fabric to reupholster. MotorcyclePartsCenter. There were only two products available, both in the same color scheme as the OEMSeat type, and I was torn between buying one or the other, so I decided to buy both because they were cheaper.
This time The cheapest one (price at time of purchase:2,830 yen) Review of.
How was your experience with it?
When it was listed in the product section. The higher one is shiny. The cheaper one is WITHOUT Gloss. The actual product that arrived was semi-glossy and I could not tell the difference just by looking at them. When I touched them, I found that the more expensive one (SY107V) had slightly thicker fabric and seemed to last longer than the less expensive one (SY107).
How did it compare to other products?
Incidentally, as of February 2024, YamahaOEM's Seat assembly. is no longer available, but is still available in the Seat CoverSingle Item (17,380 yen).
As expected, the fabric is thinner and less durable than YamahaOEM's Seat fabric, but at this price, it makes enough sense.
[Points to note]
As mentioned above, the Seat fabric is thin, so if the Tucker is driven in halfway during reupholstering, there is a risk that the fabric will break from the Seat Base.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
I usually post PartsReview with hanghang and use my WebikePoints that I have saved up, so I can buy them at Webike. SEROW225. The only two types of Seat fabric for reupholstery for the new car were available in MotorcyclePartsCenter's lineup.
(Universal Product's Seat fabric was not an option because we wanted to use the same color pattern as the OEM.)
[How is it used?
It is used in various Situations from street riding to mountain play.
【Included Parts:presence or absence】.
Only one Seat Cover, no Tandem belt was attached. To begin with, Tandem belt has not been attached to SEROW225W since 1995 (4JG2), even OEM, so there is no problem.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker, a slightly larger version of Stapler. and short-legged core.
Vinyl bags of Large size (Vinyl bags for Garbage collection and Large sturdy) are available for each person as a measure against flooding of the seat sponge, so those who use these bags should purchase them while they are at it.
In my case, I do not use Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
In these days of daily whispers of skyrocketing prices, it is very nice to be able to get Seat fabric at this price.
Please keep up the lineup continuity.
View detail
Usage is limited.
AA01 type square eye SUPER CUB Used for the following
NeutralIndicator in Speedometer (×1pc.)
Blinker indicator (×1pc.)
Back light of the Meter itself (×Quantity:2pc. Set)
You may not want to use it as a back light as the previous reviewer wrote. It is too dark.
(My AA01CUB has a Quantity on the Back light.:Pair (for Left and Right) Quantity:2pc. Set use, so it is not unusable. It is still dark.)
NeutralIndicator and Blinker indicator can be used as a Lamp.
We have been using it for one year and have had no malfunctions. For the price, I think I got my money's worth.
View detail
neither good nor bad
I purchased this for my RC42. However, I could not install it as it is because it was a driving school spec. I modified it and installed it. However, it became Fixed Type which cannot be folded. View detail
Wearable feeling ◎ Made in Taiwan! Made in Taiwan!
I bought this for when I am going to take my friend for a ride or when I go for a walk in the neighborhood with my CUB90! The paint job is beautiful and the Matte Black color is very cool! It is much more comfortable and better looking than the half caps sold at home centers for around 2000 yen! View detail
Rninet Back Mirror
I chose this model because of its design, and I was interested in replacing the OEM's Mirror, which looked like it had been stretched a long time. It is lightweight. There is a little bit of rattling in the connection area, which I will be taking countermeasures for as it is not cured by tightening the bolt. The blue mirror surface reduces the glare from the headlight of the following car, but the rearward vision is a little worse because of the design. And it is easier to remove and reassemble at Circuit because it is easier to remove and reassemble than OEM. View detail
It's hard to close.
If the handle is not intentionally hooked inward when closing, it may not be properly tightened and locked.
Quantity Lever to occupy the lid:It is often frustrating because it often doesn't Set and lock instantly.
The capacity is sufficient to hold a full face in Size XL and +α to hold other things.
View detail
Long tailDuck Tail Helmet
I was worried at the time of purchase that the size might be too large, as I had only chosen L Size, but it fit surprisingly well. View detail
Out of Valve
The blinker bulb of GB250 CLUBMAN has broken. Naturally, we had to replace it, but the front blinker of GB250 CLUBMAN was used together with the small lamp. Therefore, the blinker lights up, but the small lamp does not light up. Well, I have no choice but to keep it until the Rear blinker runs out. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50
This price would be good.
OEM Exhaust System purchased for Repair due to rust with Hole
I thought it might need carburetor setting after replacement, but it was Large sturdy without re-setting.
There may be individual differences regarding the installation. As for this installation.
Loosen the setscrews on the body mounting bracket and temporarily assemble the entire body before attaching all the nut
I was able to get it to fit as long as I tightened it evenly. The Clearance at the Chain Adjuster on the Rear is a little tight.
If you are concerned, it is better to secure the clearance by inserting a washer or the like at the Exhaust Bracket.
Good feeling 。 Exhaust Gasket was included with this order.
After about two weeks of installation, rust was spotted, so if you are concerned about this, it is safer to take care of it first during installation.
View detail
Discontinued and used here
Cut to the same Size to make and use. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50
Five years after installation, no problems.
[How is it used?
I've got an acquaintance. I need a SUPER CUB that's been sitting in a barn ready to be ridden." The company purchased this product as replacement parts for a part of the Restore work.
As you can see in image 1, the OEM Exhaust System that was originally installed looks like the entire lower part of the system. Baked sweet potato The exhaust system was brown and rusted with cracks and ruts (the OEM exhaust system is amazing that it doesn't explode).
Since a new OEM Exhaust System is moderately priced, we were grateful for the large change in order to keep repair costs as low as possible.
Was the one you received as per Image?
Retro in the sense that it is a replacement for the simple exhaust system before the heat guard and exhaust cover were standard equipment, and the product is exactly as shown in the image by Webike.
Was the installation difficult?
In my case, it was easily installed without any problems or difficulties. 5 years have passed since the installation, and the exhaust sound has remained unchanged with no exhaust leakage.
I checked other reviews and found that the diameter of the exhaust pipe in the exhaust system part is different and that the exhaust leakage is too large. I am very grateful that the bracket for fixing to the car body is also Standard Equipment, so I am glad that it is Large.
How was your experience with it?
As I mentioned at the beginning, I purchased a less expensive OEM type Exhaust System at that time to reduce the overall repair cost because I purchased it as a repair order from an acquaintance, but even though about 5 years have passed since the installation. I have been able to use it smoothly and comfortably without any Large Rust." so I think durability will not be a problem (of course, there are individual differences).
[Included Parts:were they on?
Included Parts:Or rather, a bracket is attached to the car body for installation.
[Was there anything that disappointed you?
None
The price is low, and if there is no deterioration after 5 years of installation, it is more than expected.
Other items that would be helpful
Point and hang of installation
The entire assembly should be temporarily assembled and the Clearance of each part should be checked before final tightening.
After installation, degrease the engine thoroughly with parts cleaneretc. before starting the engine.
[Availability and clarity of the Instruction Manual
Instruction Manual is not available. If you are purchasing this product as a necessity, you will have no problem without the Instruction Manual.
If you are not confident, you can use the PRO or A friend who can do it well." Let's ask the
[Notes]
[ITEMS TO BUY TOGETHER
Exhaust Gasket Do not reuse and purchase to eliminate exhaust leaks.
Parts cleaner." It is necessary for degreasing after installation. Be sure to degrease before starting.
[Opinions and requests to Manufacturer
It would be enough if you could eliminate individual differences in products as much as possible. Please keep up the Reasonable products.
View detail
Very good complete set of plastic
About quality and texture
A high-quality plastic kit for the whole scooter, absolutely all the fasteners are as in the original parts, except for a few points, it is necessary to drill holes for installing a small beak on the main beak, as well as a hole for the output of the spoiler brake light wire on the right sidewall, otherwise everything is fine, full compatibility and easy installation without adjustment and modifications
About the feeling of use
After installation, only positive emotions, absolutely good plastic, perfect fit and beautifully painted, no disappointments, in the photo you can see this kit after unpacking, only the gas tank cap was not included in the frame
Products to buy together
Full set of painted plastic, no additional purchases required, everything fits perfectly
Difficulty of installation
Easy installation, instead of old plastic, all original fasteners are 100% compatible
Cost performance and comparison with other products
Low cost of a plastic kit, but high shipping costs, because this product takes up a large amount of space
About shipping and packaging
Reliable packaging in a box and in a soft material that does not scratch the plastic coating
Any concerns, cautions, or advice when purchasing
Please note that there are holes that are missing on this product, 3 holes need to be drilled ------------------------------ ---------------------------- About Quality and Texture A high -quality set of plastic for the entire scooter, absolutely all the fasteners as in original details, except for several points, it is necessary to drill holes to install a small beak on the main beak, as well as a hole for the output of the Stopsignal of the spoiler at the right sidewall, all the other is fine, complete compatibility and easy installation without fitting and modifications ABOUT THE FEELING OF USE After installation, only positive emotions, absolutely good plastic, perfectly suitable and beautifully painted, no disappointment, in the photo you can see this set after unpacking, only the gas tank cover did not get into the frame Products to Buy Together A full compartment of painted plastic, additional purchases are not required, everything is perfect Difficulty of Installation Light installation, instead of old plastic, all original fasteners are compatible 100% COST Performance and Comparison with Other Products Low cost of a set of plastic, but high delivery cost, TC This product occupies a large amount of space ABOUT SHIPPing and PACKAGING Reliable packaging in a box and soft material that does not scratch the coating of plastic Any Concerns, Countions, or Advice When Purchacing Keep in mind that refinements are needed in the form of holes that are not enough on this product, 3 holes must be drilled Powered by Google Translator
View detail
Seat NBS JAPAN
My Honda monkey did not have the original seat when I bought it. Outwardly, it looked great, but the ride was somewhat uncomfortable. The original seat could not be purchased, so I decided to try this replica. There are no problems with the quality of the materials, over time everything will be clear, while everything is fine. By design, everything is fine, soundly, there were no problems during installation. On my Honda monkey, when I bought it, there was not an original seat. Outwardly, it looked great, but it was somewhat uncomfortable to drive. The original seat could not be purchased, so I decided to try this replica. There are no problems with the quality of materials, over time everything will be clear, while it is normal. By design, everything is fine, soundly, there were no problems during installation. View detail