Reviews
Ladybird exhaust bracket
Great upgrade for the cb13 if your running without pillion pegs this looks good and is well made,it didn't take long to fit very pleased with this hanger View detail
RC51 Ladybird over exhaust
These are my second set of Ladyabird exhaust. My first set were the low mount GP polish titanium exhust 300mm length exhaust cannisters. These I much prefer, Oval 400mmm length for the looks and the exhaust tone. Surprised they came with a very small baffle, but the exhaust sound with baffle out is much quieter the the 300mm Ladybird exhaust. Really prefer the looks of the long oval "VS" short round cannisters .. Ladybird fit and Quality top notch. Thanks again Web japan. Kept me inform on estimate delivery and when shipped. View detail
Available for frando 7nb
Available for frando 7nb MechanicalSwitch, which has the same structure as brembo.
I believe only frando 7nb is available as a precaution.
The reason is that the current frando's Lineup has changed the SizeSetc.Spec. of the Pipod degree.
Also note that this is not an official usage.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Ladybird excellent upgrade
Very pleased with overall appearance and quality. Installation was very quick and allowed me to remove passenger pegs. This gives a much 'cleaner' look than stock! View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Repurchase
Until recently, I had been using KFACTORY's CLRAluminum Exhaust Bracket, which is a bracket that is attached to the top of the RightRear suspension, but when driving at low speeds, the bracket vibrated and made me uneasy. I was going to replace it with BirdParts' Normal position type bracket, but the stainless steel bolt and nut that fixes the Muffler silencer got damaged and I couldn't remove it. I had no choice but to cut the bracket with Grinder and it became unusable. The bending and welding is beautiful, the strength is perfect, and the price is not too expensive.
However, if the bolt for the exhaust system is made of Stainless Steel, it will be easy to get damaged, so it is safer to apply Thread Compound or to use a normal steel bolt.
View detail
Fits: HONDA VTR1000 SP2, HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VTR1000 SP1
ladybird exhaust hangers.
These hangers are fantastic !!, no one rides a passenger on a RC51 for any time or long before they say thats enough, this is the route to go !!! and are so trick looking and light weight, TOO bad we cant get the titanium ones any more. Will go great with the exhaust which in their selves are in a league of their own, Thank you Jose View detail
It's pretty good!
It is very lightweight and beautifully made, but it needed a color to be installed, probably because of the compatibility with WYVERN Exhaust.
Installation is easy, so even beginners will find Large sturdy.
View detail
I'm feeling SPW!
I bought it here
We had to wait about two months for delivery due to the made-to-order nature of the product.
After installation, it just looks Parenthesis good!
Sound, with the attached baffle, seemed to be a little louder than the OEM Exhaust System, or maybe not louder at all.
Without Baffle, you'll experience intense SOUND and a heartbeat!
As for the installation, it's a hassle anyway.
As noted, it requires quite a bit of machining, so an electric cutting tool is a must. footpeg and brake hose will come as OEM.
View detail
Since it stabs and can equip easily only by screwing, it is good. Since appearance becomes a race ish, he is smart. Although he does not want to become hollow, of course, I think that it is effective.
Since it stabs and can equip easily only by screwing, it is good.
Since appearance becomes a race ish, he is smart.
Although he does not want to become hollow, of course, I think that it is effective.
View detail
Brake switch on Radipon
My hydraulic switch went bad and I was looking for a Mechanical switch and this is the one I got.
Installation was easy with the Instruction Manual.
I like it very much
View detail
MechanicalSwitch is built to not malfunction.
My previous Brake from another company broke, so I bought this product which seems to be well made in terms of safety.
It is a comparison with a certain factory-made Switch that was used before.
The 0 factory model comes with a stainless steel brake pivot pin, and the switch itself is a compact brembo.
I liked the Large variant because of its simple and stylish construction that does not destroy the design of the M3Bolt, but the M3Bolt one to BrakePivot!
So, if you run repeatedly, the switch will turn and the brake will stay on.
It happened many times, I over tightened the M3Bolt and distorted and broke the Brake switch and the Plate that holds it.
It was then physically and rationally installed and has been in use for about 6 years.
The newly purchased Switch made by Lady Bird is made to be conspicuous by the thickness and the size of the Switch which is Large, but
There is a stopper that prevents the Switch from malfunctioning, and it is well made, so I was able to install it with peace of mind.
However, it is not possible to install it only with the attached Hex wrench. Separately, 5.5mm Spanner, Wiring, Electric Works Pliers, etc. are necessary.
If you have never made a Wiring before, it may be difficult to install.
Also, since the brake switch is thick, it may interfere with the brake hose depending on the hose routing and may not be able to be installed.
I like the rugged design, but the brake switch is a prominent design, so tastes may vary.
View detail
Reverse actuation
I installed it on Ninja250 Radial master (brembo).
I installed it as per the Instruction Manual and tested the lighting.
When the brake lever is not held (SwitchON, pressed) Lights.
With the brake lever held (Switch OFF, not pressed) "Turn off"
and lights up in reverse of normal operation.
Just to be sure, I tried it with the OEM Brake switch and it works fine, normal operation (SwitchON = off, SwitchOFF = on).
Because it is not possible to run in the city as it is, the brake switch of OEM is processed in time, only the base plate of the commodity concerned is diverted, it installs, and it operates...
PartsParts itself was beautifully made, and "Less malfunctions, more reliable Switch. and the product description, but it is in a state of dissatisfaction.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200
image
I couldn't post a picture in my last impression, so I'll post it here. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Installed on ZrX1200 DAEG
This is the impression after using it for about one year after purchasing and installing it.
I installed this Lady Bird's Aluminum Exhaust Bracket on my previous ZrX1100, and it was good parenthesis. I think the surface is Aluminum with Buffing, but even if I polish it well, it is oxidized to white. It is a single rider spec. to replace the normal tandem stepBracket on the exhaust system side, but the shape is good and the parenthesis is good. It is Recommendation.
View detail
It's a SMART look.
Changing the Silencer will also change the Silencer Bracket to give it a more custom look.:Aluminum makes it lightweight and buffed, so it looks great and has a SMART finish. View detail
It's harder to lock
SUNSTAR 230mmRotor and Quantity:I replaced it with Set Compared with the previous state, it is easier to control Brake and harder to lock It is a very good feeling on the road of Kunekune
All the shims from the Caliper center that came with the product are used Clearance is finally secured
The footpegs may need to be adjusted because the bedal has no play (I prefer to play 0.)
View detail
It's better to have it in a heavy vehicle
It has been a while since I installed it in GSX-R1100, and I had a chance to confirm the effect, so I would like to introduce it to you Report
When I fully locked the Handlebar, I couldn't get the half-clutch to work as well as I thought it would I knocked over the Motorcycle
But thanks to this Slider, the invariably scratchy Starter gear cover ( (EngineLeft Side) is intact
The Bumper effect of a sturdy Normal muffler? Together with Tank and Cowl, Tank and Cowl are intact, and it only took a Wound in Mirror!
Mega sports can be accidental when handling it, so this is a great way to get it done It's a relief
Due to the structure of this Slider, if it falls down at a high speed, it will leave the aluminum base and only the plastic part I think the
In a fall on a public road, a too strong Slider can make the accident worse, so a strong impact can break it It must have been designed in such a way
Also, you have to remove the Slider when you install the Cowl, but you can leave the base attached It is easy to work with
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSXR1000, SUZUKI GSXR1000, SUZUKI TL1000S, SUZUKI SV1000 S 03, SUZUKI SV1000 03
If you don't care about it, just the fact that it has a brembo makes you feel superior
I asked the Shop to install it When I didn't get a hit, I was scared that it was a Brake that didn't work, two and a half I think it will come out around the time Change After all, there is a sense of presence Moreover, it may be the effect double if it is made MASTER of brembo It was View detail
Beautiful piece, good price
Perfect fit and quality. Installed in under 5 minutes. Also 5.1oz weight reduction from stock passenger peg. I really enjoy the polished look. Also it comes with x3 stainless steel bolts and washers and a nut. View detail
Fits: HONDA VTR1000 SP2, HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VTR1000 SP1
Nice Product
I have an RC51 SP2 (VTR1000RR SP2 in the rest of the world I think), and bought these to eliminate the stock exhaust hangers and passenger pegs. I have Sato Ti low mount exhaust, and the Sato titanium hangers I wanted are no longer available. There are a couple other offerings, but they are machine cut pieces made from sheet aluminum. These are very pretty pieces, made from machine bent aluminum rod, that really cleaned up the look of the bike. They fit exactly like the stock OEM hangers, so don’t buy these for high mount or Banzai mounted systems. View detail