JvB Moto Motorcycle Reviews

Filter

Write a review and get Webike Points!

Reviews

JvB Moto Clear all

JvB Moto

06 Nov 2022

Kedo] Stock Speedometer Offset Bracket

Fits: YAMAHA XSR700, YAMAHA XSR700

Japanese Webike user

4/5

The ability to change the position of the Meter is fulfilled, but

[How is it used?
The OEM has the Meter positioned directly above the Handlebar, which cannot be seen by simply moving your eyes and requires you to lower your head slightly.
Since I am a beginner in Motorcycle, I often check the Meter, but I found it a little inconvenient, so I purchased this product whose position can be changed to the back side.

Was the one you received as per Image?
One of the screw holes was not painted. This is not visible after installation.
The included screws are silver, and they look a little like they are floating around the handlebar, which is all black.
The Silver component that attaches to the back is just a cut aluminum plate, and the lines and writing on the aluminum plate were left intact. The lines and letters on the aluminum plate were still there. The machining accuracy was not a problem.

Was the installation difficult?
I tried to install it according to the instructions in the instruction manual (see attached picture), but the rubber bush (I think it's called) almost tore off.
Because I tried to install the cable without considering its routing, I had to install and remove the part several times.

How was your experience with it?
It is very comfortable to have the Meter come to the edge of my field of vision where I can see it very easily and check it at a glance.

[Included Parts:were they on?

[Was there anything that disappointed you?
1. some areas are not painted.
2.Screw is different from OEM (Black) (Silver)
3. the board to be applied to the back side is an aluminum board as it is, so it looks very fake.

It serves the purpose of changing the position of the Meter, so it may not be a Level to return, but I am somewhat doubtful that Motorcycle products are so Large-tasting. View detail

JvB Moto

10 Nov 2021

[KEDO] License Plate Holder With Tail

Fits: YAMAHA MT-07, YAMAHA MT-07

Japanese Webike user

3/5

What? I can't find a Number.

I bought it to do SCRAMBLERCustom.

Large satisfied with the super martial finish.

You will need to modify the harness, but there are tail and blinker harnesses for Yamaha that are sold separately, so you can buy them if you don't want to bother. I'm a bullet terminal craftsman, so I replaced it steadily.

The quality of the Lens and the amount of light is fine, but I think the color of the Wiring of the Tail lens is reversed. The Tail was always bright and didn't change when I stepped on the Brake, so I switched the Wiring and it worked correctly.

Well, this kind of thing is common in foreign parts, so you need to check it all the time.

The blinker is also LED Blinker from the same manufacturer.

So, here's the problem with Large.

No Number is attached.

The position of the holes is completely different.
An EU standard?

So it needs to be processed.

I bought Bracket and Bolt nut from Home center and installed them.
(Maybe this is the kind of thing I bought myself, it was iron in Black)
https://www.komeri.com/disp/CKmSfGoodsPageMain_001.jsp?GOODS_NO=41325&dispNo=001022007

If you raise the mounting position, the Blinker will be hidden, so be careful there too.

If you can't do this, buy a domestic kit that you can rely on. View detail

JvB Moto

09 Nov 2021

【Kedo】LED Turn Signals

Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09

Japanese Webike user

5/5

The Headlight area is neat.

This is the Front Blinker I bought when I made my MT-07 into a SCRAMBLER Custom.

It contains a pair of Blinkers and a Heat Shrink Tube.

Jvb has a Harness for YAMAHA motorcycles on the market and you can install it without any care.
I processed it with Bullet terminal.

Heat Shrink Tube is done with a heat gun, but I shrunk it by burning it with Burner of the CD can so that it may not become a direct fire.

It will be an LED Blinker, so the OEM Blinker relay will not work correctly.
An external LED compatible Relay is required.

I'm ↓ so it's working correctly.
https://www.webike.net/sd/24232608/
Relay is easy to replace.

Installation position is under the handlebar of the front brake and clutch lever.

Co-tighten the Nut on the Handlebar side.
Quantity:Pair (for Left and Right) In a sense, it's safe to say that you can't put it on by mistake because the shape is different.

I don't think there are any problems with light intensity or visibility. View detail

JvB Moto

08 Nov 2021

[KEDO] LED Headlight & Cover Kit

Fits: YAMAHA MT07

Japanese Webike user

4/5

Style is outstanding.

It is one of the options for those who want to make their MT-07 a round-eyed Spec.

Note that there are different types of Covers for different years.

Exclusive Design (same as XSR700) so it can be installed with Refreshing.

However, you need to modify the body side when you install it.
Arm holding the Harness of the Right Side near the with Handle interferes with the Cover, so bend it.
It is not so difficult if you do it with Pliers, but be careful not to break it.
Harness handling needs to be moved a bit to fit somewhat.
And the color of the Harness on the Body side is different from the Harness on the Headlight side.
Harness is not waterproof, so you need to waterproof it accordingly.

Also, the only way to adjust the optical axis is to use the screw to fix the body.
If you loosen it too much, the Body will rattle, so you'll have to tighten it up by adding a Rubber Washer or collar.

Color:Unpainted, has some BALI and dents. You can't see it from a distance even if you put it on as it is.
I left it in the hands of a PRO painter and had it beautifully matted Black.

The Instruction Manual is entirely in German.

If you have the ability to handle the above to some extent, I think you can install it without any problems.
If the above is difficult or you don't understand it, ask Shop or other people to help you.

The style is outstanding, so please give it a try. View detail

JvB Moto

04 Nov 2021

[KEDO] Tank Center Cowl Kit

Fits: YAMAHA MT-07, YAMAHA MT-07

Japanese Webike user

5/5

Super cool with the Solo seat!

If you're going to put on the JvB Moto Solo seat, I'd say the Center cowl is a must.

There is no use for driving without it, but it will be put on if you think about Design because it will be skewed between Tank.

First of all, it is necessary to cut off the BodyTank Side Cowl.
It comes with a sheet of paper for cutting off the seal. Attach it as instructed in the Instruction Manual, and cut off the unnecessary parts.

I bought a cheap Leutor from Amazon and cut it carefully, no problem.
If you can't do the work around here, ask Shop to do it for you. The cutting surface is basically hidden by the center cowl, so you might be able to get away with a messy job.

And the actual connection to the Side cowl, the Instruction Manual says to drill a hole with a 3mmDrill and stop with the supplied Tapping!!!

I'm afraid of cracking the bottom hole. I'm afraid of cracks even if I drill a hole.

If I do not make this part easy to remove, when I remove the Side cowl, I always have to remove both Sides together, so I did not use Tapping, and because I had a Push rivet of appropriate size, I made the bottom hole a little large with Footpeg Drill to fit it, and connected 4 places. I connected it.

Because it is the one which is often used for the connection of Cowl originally, there is no problem in the vibration etc. Because the tapping of the attachment is Silver and stands out in my body color, it was GOOD that I changed it to the Rivet of Black in style.

Also, it is assumed to be Large, but Color:It is Unpainted. it is in the state of Gel coat of FRP.
I left it to the paint PRO to match the body perfectly.
Candy paint will cost you a fair amount of money, but I can gladly pay for this finish myself, as I don't have the time or skill to do it myself. View detail