Reviews
To repair the Motorcycle seat anchorage & seating!
Since I have repainted several Motorcycle Seat fabrics, I thought I would try to do the same for the inside of the Seat! I decided to take on this challenge. The result was Large satisfaction! This sponge is really easy to work with (easy to cut with scissors), so you can easily use it for anchoring and repairing scraped (rotten) Seat sponge! I had some left over and used it to repair the sponge on a worn out seat chair that I love, and it worked fine too! The price is cheap and I will replace this sponge every year from now on! View detail
Fits: YAMAHA SR250, SUZUKI 250SB, HONDA 250T LACustom, HONDA AX-1, HONDA CL135, HONDA CL350, HONDA CL72, HONDA CL77, HONDA CM250T, HONDA CM400T, HONDA CRM250AR, HONDA CRM250R, HONDA FTR223D, HONDA FTR250, HONDA GB250 CLUBMAN, HONDA GB400TT, HONDA GB500TT, HONDA MT250ELSINORE, HONDA MTX125R, HONDA MTX200R
Does not fit the KL250 Sherpa.
The Manufacturer's list of compatible models says it is compatible with KL250 Sherpa, but that's too long.
If installed normally, there will be excess
The quality of the product itself is not bad, so I think it will be fine for cars with longer forks.
KL250 Sherpa's Fork outerTop to bottom of trident is 240mm
Catalogue value WheelTravel is 230mm
100mm remains above the Outer even when shrunk the most without processing.
This would make Stroke about 130mm.
If it was just for Inner Tube protection purposes, it would be fine, but I don't think it is, so I cut it off, even though it will look very ugly lol.
In hindsight, I lightly regret that using the top half wouldn't have made it so ugly.
However, even in this state, the Stroke will be reduced by about 50mm
Boots itself becomes Bump rubber.
Even other companies' products that say they are compatible with KL250 Sherpa are quite long.
Would it be better to just use a shorter product with more extension?
Maybe I'm losing my mind, but I'd like to find a good product!
I bought it + even processed it so I'll be using it for a while lol.
View detail
Fits: YAMAHA Remote controller jog, YAMAHA TOWN MATE, YAMAHA Box, YAMAHA VINO(2Cycle), YAMAHA JOG APRIO, YAMAHA JOG POCHE, YAMAHA YV50 Z II, YAMAHA Axis Treat, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, HONDA DIO, SUZUKI VECSTAR150, SUZUKI VERDE, SUZUKI LETS4, SUZUKI LETS5, HONDA LEAD 100, HONDA LITTLE CUB, HONDA LIVE DIO, HONDA FREEWAY, HONDA Byte
Grip replacement for LETS4
The LETS4 grips that I have been using for many years have started to hydrolyze and become soggy, so I switched to this product's grips.
The original grips can be easily removed by wiping Parts Cleaner between the handlebar and the grips.
The grip is the same as OEM and easy to use.
View detail
Fits: HONDA VFR750, HONDA VFR800, HONDA VTR250, HONDA VTR1000 SP-1 RC51, HONDA NSR250R SE, HONDA NSR250R, HONDA NSR250 MC18 MC21, HONDA CBR250 MC19 MC22
cheap and has a bad finish
I bought ai-net fuel tank cap to replace the old cap that was damaged. The new ai-net cap is cheap and has a bad finish. The new tank cap is raised higher with the fuel tank. View detail
Fits: HONDA XLX250, HONDA XR200, HONDA XR250, KAWASAKI KL250, KAWASAKI KLX150, SUZUKI DF200, SUZUKI SX200, SCORPA T-RIDE 250F, HONDA CRF150R, HONDA CRM250AR, HONDA CRM250R, HONDA FMX650, HONDA SL230, HONDA XR250 BAJA, HONDA XLR250, HONDA XL-DEGREE, HONDA XR230, KAWASAKI KL250, KAWASAKI D Tracker, HONDA XR250
I appreciate the affordable price.
[How is it used?
The KDX220 I purchased used was not in bad condition for an old vehicle from the 1990s, but the seat cover was in a slippery condition because the surface had begun to harden, probably because it was from that era.
On the way home after taking delivery of the car at Motorcycle shop, my buttocks moved back and forth every time I accelerated or decelerated, making it very difficult to enjoy the ride, and as soon as I started driving. The first custom was to reupholster the Seat Cover. It was like that.
Originally, I was going to bLOOVE it, including a look at the vehicle, but I went home right away and looked at Webike's product introduction section. KDX220 Seat I've been searching for...
Since it is an old vehicle, there are not many choices, but I-Net's Off-road Vehicle UniversalSeat Cover was a hit, and the price is low! If by some chance I fail, I'm ready to give up." So I bought it
How did you like it?
As a universal product, it is not as good as the Seat fabric made by a three-dimensional manufacturing process for each car model, but I personally think that the KDX Seat itself is not a complicated shape, so I was able to stretch it well.
The new fabric is highly flexible and the dimpled finish gives it a high grip, so you can enjoy riding without being carried back and forth every time you accelerate or decelerate.
To be honest, I wanted to stick with the OEMSeat Cover, but after looking at the price, the thickness of the fabric, and the condition of the finished product, I felt this product was sufficient.
How did it compare to other products?
There are few choices in terms of car models to begin with, and other products are expensive and have stopper belts sewn into the seat surface. I mean it!" I couldn't choose one because I had a strong feeling that it would be embarrassing to me, as I have poor driving skills.
What points should I pay attention to?
Patience and ingenuity are required because the products are not three-dimensionally sewn for car models.
If the tucker is driven in too shallow, there is a risk that the fabric will break from the tucker.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
The only Seat fabric that was safe for normal use was sold only by iNet.
We were not able to confirm that the products were made by KawasakiOEM, so we did not consider them in this case.
[How is it used?
Basically, it's Main for city driving. I can't even use SEROW, so it was too Hurdle for me to play in the mountains with a 2CycleEngine equipped car.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. with Instruction Manual and Vinyl for waterproof.:Set
Tandem belt is not included, so those who need it must purchase it separately or reuse the OEMBelt.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
Although it may not be a problem for popular cars, it is a product that older cars and minors cannot do without, so we hope you will continue to sell Lineup for a long time.
View detail
Fits: HONDA fusion, HONDA fusion, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA FUSION
No more foggy display
Ive been wanting to replace my display for years now, i was skeptical about finding a replacement. I couldn't believe i found one on webike. The price was cheap i think i paid more for shipping. I bit the bullet and ordered one and wow in glad i did. Looks and operates just like the original.. it was my first order from webike. I will definitely order for them again View detail
I used it on Cushion for a chair.
This is the third time I have used this Seat sponge.
At first I used it to improve the OEMSeat of the Initial Model Grom, which was a pain in the buttocks.
Reference https://imp.webike.net/diary/205834/
The second one. Torture Seat" The Seat of KLX125 (Initial Model) was used to convert the Seat to a wider Seat. It took a lot of time and effort, but the result was satisfactory.
This is https://imp.webike.net/diary/205834/I showed how to do it in
The third time I used it to improve Cushion for chairs.
The Cushion for home use has a very soft and thin Sponge, so it quickly becomes floppy.
Therefore, we decided to substitute the Sponge with this product, which is a urethane product for motorcycles.
First, take out the Sponge inside from the Cushion.
Shape the eyeNetSponge to that same shape.
Cutter knives are often used to cut urethane sponge, but it is always hang to use new ones. If the teeth become even slightly rounded, the sharpness will deteriorate.
This time I cut it with Large type scissors because it is thin.
Two sheets were not enough, so I also used leftover eyeNetSponge that I had saved.
Bond is used to attach eyeNetSponge.
When the shape is the same as the original Sponge, place it in Cover to complete the process.
Feeling of use
Hmm? Better, but still not good enough.
Songe lacks thickness.
A thickness of 2 cm does not seem to be sufficient to create a comfortable seat that wraps around the buttocks.
If the thickness is 4 cm, the seating comfort would be satisfactory.
View detail
Fits: Others Shock driverQuantity:Set
If you don't have to use it, good for you.
It's only here and there, but use it before it goes unBrown.
If there was a hand guard on the grip, it would protect the hand from losing the strike.
Reduction in cost, I guess.
It is an insurance tool, but it is more economical than no-brown, time loss and hard work.
View detail
Centrifugal clutch.
I installed the clutch in my scooter over a year ago. After starting the engine, it turned out that it had quite large radial runout. I was afraid that it would jerk when starting, but I dismantled it and have been driving the Honda for over a year. Last fall, it started jerking a bit when starting the scooter, so I'll have to check it out by spring this year. -------------------------------------------------- -------- I installed the clutch in a scooter over a year ago. After starting the engine, it turned out that it has quite a large radial beating. I was afraid that he would jerk while starting, but I dismantled him and I have been like Honda for over a year. Last fall, it started to jerk a little while starting with a scooter so I will have to check it until spring this year. Powered by Google Translator View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR250R (MC17/19), HONDA CBR1000RR, HONDA CBR250RR (MC22), HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA NC750S, HONDA CB400SUPER BOLDOR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1000F
Accuracy of holes is not very good.
I bought this for Repair because the Knee Slider part of my CBR900ROEMfootpeg was cracked.
The texture at a quick glance is the same as the OEM Product, but the accuracy of the holes in the footpeg may be poor, and there is a feeling of pinching when inserting the pin.
I couldn't push it in by hand, so I finally tapped it in with a plastic hammer. (OEM Product's Pin and Footpeg are Smooth in this area)
I drove for about an hour after assembly, and there is no particular discomfort.
View detail
While CaliperRestore.
I bought it because I restored a NSR50 Brake Caliper but did not have a Cap. It can be used normally. View detail
Spring Mounted Hook
It is used for spring removal and attachment of the Exhaust System.
The price is reasonable, and it can certainly be made Compact since it can be split in two.
It is not used that often, but it is good to have 1 pc. to take the spring on and off for maintenance.
View detail
Fits: HONDA VFR750, HONDA VFR800, HONDA VTR250, HONDA VTR1000 SP-1 RC51, HONDA NSR250R SE, HONDA NSR250R, HONDA NSR250 MC18 MC21, HONDA CBR250 MC19 MC22
Bad accuracy
Purchased as a replacement for a Gasoline leak from an OEM cap.
The installation itself is completed quickly with three Bolts.
The lid was slightly lifted, but since it was an Other Brand Product, we thought it was inevitable.
However, once the lid is opened, it is so inaccurate in its construction that no matter how hard it is pushed in, it will not lock and the key will not pull out.
Rubber packing was the same shape as OEM, so I used it to replace the OEM cap. The Gasoline leak was fixed.
It would be good to use it as a parts holder for Packing to be used for OEM, but it is not cosy to pay almost 4,000 yen just for Packing.
View detail
Let's just call it RepairMaterial.
Used for OEMSeat Repair.
Seat is back to normal.
It doesn't have the performance to reduce buttock pain, but it does have the performance to reduce buttock pain.
I am satisfied with the hold feeling and as a repair material,
View detail
Fits: BMW R nineT Scrambler, BMW R nineT Racer, BMW R nineT Pure, BMW R nineT
I think it needs to be improved!
After touring (about 5-6 hours), when I was wiping it dry, I found the pad peeling off, which seems to be due to the adhesive sticking to the tank and the peeling between the pad and the adhesive. View detail
Professional customer service
Very nice item, highly recomended. EMS couldn't deliver it to my parcel shop and it was returned to Japan. After a a friendly conversation it was sent again with GLS. It worked this time. Webike has got a really good customer service. Thank you. View detail
Fits: HONDA APE50, HONDA APE100, HONDA BROS, HONDA CB-1, HONDA CB1000SF, HONDA CB1100, HONDA CB250T, HONDA CB400SF, HONDA CB400SS, HONDA CB500FOUR, HONDA CB750, HONDA CB125, HONDA CB125T, HONDA FTR223, HONDA GB250, HONDA HORNET, HONDA JADE, HONDA SL230, HONDA SPADA, HONDA VRX400
the screen is good
I like that the clear screen is clean.
It bends well too.
It's nice that it's easy to install.
However, the screen cracks over time.
I don't know why.
However, the price is cheap so I can forgive it.
I hope the screen is not broken -------------------------------------------- --------------- The clear screen is clean. It is also good to bend. It is also easy to install. However, after time, the screen splits. I don't know why. But the price is cheap and you can forgive. I hope the screen won't break Powered by Google Translator
View detail
spare
When I replaced it with a MainCable from another company, Mini Flat Type Fuse was used, so I bought this for a spare.
I don't think it will be used that long, so it would be helpful to be able to purchase the A I want through Single Item sales.
View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR250R (MC17/19), HONDA CBR1000RR, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSR600, SUZUKI GSR400, HONDA CBR250RR (MC22), HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
cheap
This is the second time I have purchased this product. Last time, the rubber broke after about 10 months of use. It is not durable. I think it depends on how you think because the unit price is cheap. I don't mind the hollow caps feeling while driving. View detail
Expectations for Waterproofness
I bought this as a Vinyl to put inside the Seat because the Seat absorbs water in the rain.
Not yet available as it requires Air Tuckeretc.
I pre-purchased the product because it is inexpensive.
I hope the water stops sucking in….
View detail