Reviews
Double nut or Shift rod.
I bought it to use for double nut and shift rod.
It is 3mm, or about half the thickness of KTC's 6.5mm on hand.
The angle is 75°, which is not so common, so it is easy to hang even if Arm and Shift rod overlap.
Although there is a problem of strength, it would have been better if the jaws had been made a little smaller, as I don't think that high Torque will be applied to thin-lipped products.
View detail
For CRF250L front axle
Purchased to loosen the front axle of CRF250L.
Although 14mm Hex is not a tool that is used very often, I purchased a solid tool because Off cars often have a lot of suspension modifications and there are opportunities to remove/attach Wheels.
The insert is 1/2, so you need to be careful only there, but it is a stable SIGNET and satisfactory tool.
View detail
I don't use Size very often.
I rarely have a chance to use a 27mm Combination wrench, but I bought a SIGNET wrench with a good balance of price and quality, thinking it would be used occasionally for suppressing Kashimaru-kun's Holder and for Axle Shaft of Big bike.
It is indeed a powerful Size.
View detail
Used with Axle Nut
No problems with this product. I use it with Axle Nut on my off-road motorcycle.
For a moment I thought about substituting Pliers, etc., but then I thought, well, I'll just buy it and add another Socket! (Lol)
SIGNET is a Brand that I trust, so I chose them first based on cosmetics. The performance is also fine.
View detail
For removal of Stem Nut
I bought this for removing the Stem Nut when replacing the Top Bridge on my GSX1300R HAYABUSA.
It works fine, and it costs about 2000 yen if you buy it at Home center, so this one is cheaper.
Info:(Japanese only)
GSX1300R HAYABUSAStem Nut tightening Torque:90N
View detail
Emboss process is good, but ….
Always use when doing this type of maintenance. Paper." I've been using a variety of "Turtle Wipes" for a while now, but this one has an Emboss finish, which makes it less fluffy to the touch, but it's hard to wipe with just one sheet. hellip; View detail
Fits my needs on hard to reach places with a ratchet
About quality and texture 5/5 - Chromed and slim ratchet About the feeling of use 5/5 - smooth gear ratcheting action Products to buy together: Maybe a pouch or tray to store this. Difficulty of installation N/A Cost performance and comparison with other products 4/5 - Could've come with a proper tool pouch About shipping and packaging: 5/5 - Bubble wrapped all the way Any concerns, cautions, or advice when purchasing: Decide for a place to store the tools before buying View detail
Appropriate tools are easy to use
I needed a 15mm Wrench for toe adjustment on my car and always tried my best with a regular length Wrench. I bought a LongWrench because it became sticky and hard to turn if I didn't touch it for a while, and I was able to adjust it easily. I tend to be in an impossible position when adjusting it, so it can be dangerous to turn it with too much effort. I am glad I purchased it. View detail
Cheap but good
The air gun is powerful and has a good volume of air emission. View detail
Excellent product . Able to adjust size by removing nozzle to adapt to different size of opening . Highly recommend. View detail
Quantity to Transporter:Convenient to load 1pc!
I don't think many people are that drunk, but Free Do off the back row seats. (GB3) The size was almost Exactly on the floor behind the
It fits in as if it were a SIGNET sales car. (Lol)
Purchased for use as a protective matte when loading Motorcycle and luggage on a Freeed that has been made into a TransporterSpec.
I love the pattern that matches Garage and tools, as well as the good thickness and solid texture.
However, it is still a fabric or non-woven fabric, so its strength is not that great.
If you lay it on the floor and grind it with Motorcycle's STAND, you might get a hole in it.
So it might be good to use it to hold down luggage that rattles, or to protect the ceiling interior when loading a motorcycle.
It is a clean Material and looks good to be laid as a floor Matte for overnight stays in the car!
View detail
To the Magic Remodeling Base
[How is it used?
First of all, I would like to apologize to Manufacturer,... I am sorry.
NSR250R (MC21) I purchased this product because I could not turn the cylinder nut under the RCValve of the "R" with the tools I have on hand and had to make a magic modification.
Was the one you received as per Image?
It is a Nut with a 1/4 insert diameter that is quite short in overall length as advertised.
The texture and precision of the Socket are perfect.
How was your experience with it?
If you have ever removed the Cylinder on the Rear bank side of the MC21, you know that it is in a rather troublesome position.
I visited the blog of a person who has made his own by cutting cheap Nut and put it into practice.
As you can see in the photo, I thought I had pushed and shaved it down quite a bit, but the height was still very Limit.
I tried my best to turn the nut with my Spanner, but it was a hexagonal type, so I was able to hold it firmly and remove it safely.
[Points to note]
The insert angle is 1/4, so applying too much Torque is dangerous.
How did it compare to other products?
T2Racing offers a special tool for this nut, but it is so expensive that I was hesitant to buy it.
https://www.webike.net/sd/24576874/
If you plan to work on it a number of times and want to be sure it will work, you may want to buy it.
【Review】
I think the Nut itself is very well made and accurate.
It would have been best if there was a shorter one, but this product was the most suitable for my requirements, so....
It was quite a challenge, but I am glad that I managed to turn the nut.
View detail
Not in Tools Set!
Ducati 900SS needs 11mm for brake fluid replacement with brembo caliper.
When I put Glasses on it to replace it, I found it was too loose with 12mm, and it didn't bite with 10mm... I didn't think it would work with 11mm...?
I didn't have 11mm in my tool box, so I hurriedly snapped up SIGNET's Combination wrench 11mm.
I received the product and immediately replaced the fluid, but it was an exact 11mm. 11mm may not be used very often, but you need a tool.
View detail
I needed it for RamMount.
I was in a hurry to buy this Screw when I tried to install Ram Mount. I had no idea it was Inch. I chose this one in millimeter because I would never use Inch Screw in the future.
I have to look at everyone's Review properly before I buy.
They turned the Screw of Inch well.
View detail
I'd like to have a pair.
Was the one you received as per Image?
It was just like the Image in the picture.
I was looking for Gloves without Velcro, so I am glad.
[How did you feel about the Fit?
I usually use Large size gloves for Motorcycle, and the same L size felt just right this time.
How was your experience with it?
It fits securely in the hand and has a good clip, making it easy to use the tool.
However, the palm grips are worn off after use. Well, it is a consumable item, so there is no problem there.
[Was there anything that disappointed you?
I didn't expect that much, for better or worse, so to say it was as expected is an understatement.
How did it compare to other products?
I have used Mechanics Gloves and certain Bear Gloves in the past, but they were a bit thick,
I was surprised that there was nothing to MATCH, such as Velcro on it.
The Mechanics Gloves were as good as you'd expect, but they were a bit pricey and not as easy to use,
I lose them unexpectedly (problem of usage lol), so these are very good Mechanic Gloves in the sense that they are reasonably priced and serve the purpose of Gloves.
As expected of a tool shop.
View detail
Suddenly needed tools are useful
Maintenance is required suddenly, so it would be a good idea to prepare in advance.
I would be happy to spray lubricant and use Shock driver to remove it before using the reverse Tap.
It's heavy but I like SIGNET tools and the quality is solid!
The 12.7 socket can be used as it is, which is convenient.
If you have a Conversion Adapter with a plug-in angle, you can use any Socket.
I recommend SIGNET for its good cost performance and quality.
View detail
Desorption …
The description said it was detachable, but it could only be used in the detachable direction.
I was very disappointed that it could not be tightened, but since I was able to remove the Filter, which was tightened very tightly, and the construction of the product itself is solid, I think it is not so bad if you break it down.
View detail
I can do without it, but it would be useful.
Quantity of Hex wrench:I have a Set, but this Grip-type Hex wrench is useful when I want to apply Torque firmly while turning quickly.
With motorcycles, it is mainly used to remove the exterior and other parts. I mainly use it for maintenance on road motorcycles.
SIGNET's Wrench set is easy to buy because of its reasonable price. However, the Case is too large, so I would like to see some kind of device for it.
I Rose it and store it in my tool box.
View detail
useful tool
Crowbars are often needed to repair motorcycles, but plastic crowbars are not durable and easy to break. The SIGNET crowbar set purchased by webike is very strong and durable. There are four models of different sizes suitable for use in various spaces. Even small places can be easily operated. -------------------------------------------------- -------- Motorcycles often need to use prying rods, but plastic prying sticks are not durable and easy to break. The SIGNET pry rod group purchased by Webike is very strong and durable. A total of four models are suitable for various spaces. Then Small places can also be easy to use. Powered by Google Translator View detail
Tools to carry when touring on forest roads
I always enjoy forest road touring on my beloved HUSQVARNA TE250.
I often have motorcycle troubles while touring, so it is very important to have the right tools with me.
We purchased this Tools Set because it seemed to be easy to work with in the mountains.
The decision was made based on the fact that there are 6mm and 7mm small sockets for HUSQVARNA, and that there is no need to change the size of the socket.
I have used it many times in the field, and it is very easy to handle and facilitates work.
One complaint I would make is that if the thickness were a little thinner, it would have been 100 points. But since it fits perfectly inside the Bag, it is not a problem again.
View detail