Reviews
the best dress-up item
It's the best dress-up with a long tail. The archi product is too expensive and large, but it shows the right price and size. There are no problems with visibility and brightness. View detail
bright
I think it is more crisp and clear than OEM. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Refreshing.
I am happy to be able to install the DriveRecorder-Body without having to worry about where to place it.
It is Stage of Exactly on Body.
View detail
To replace genuine products
The original gear change lever has rubber rolled up in a roll shape, but since I frequently change gears, the front rubber often rattles, so I purchased a POSH product. I like the design of the genuine product more, but I like that this product comes in 2PCS. -------------------------------------------------- -------- The original gear change lever has rubber rolled up in a roll shape, but since I frequently change gears, the front rubber often rattles, so I purchased a product made by POSH. I like the design of the genuine product more, but I like that this product comes in 2PCS. Powered by Google Translator View detail
Easy TankStar
I have been interested in this one for a while with the installation of the Bikini cowl.
The bending process does not appear to change the tint much unless it is carefully and aggressively Tensioned.
The OEM bolt was not long enough, so we had to make do with what we had.
View detail
More Classical
I replaced it with a new one that I thought would fit SR400.
It is secured with a single Plus screw, but it is aligned with the outside of the OEM's two Screw holes.
View detail
Fits: HONDA CB1100, HONDA X4, HONDA LD 97-03, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
Posh sprocket cover
The cover was delivered very well packaged,after unpacking it you could tell it was well made and good quality,fitting this item took 45mins from start to finish and it looks great View detail
Anyway, it's bright.
I think this abalone-type Tail lamp is good and crisp, although I can tell that NORMAL is so-so with Brake applied. View detail
For vehicle inspection.
[How is it used?
I purchased this product because another LED taillight was indicated to have insufficient area to pass the bb1 inspection.
Was the installation difficult?
For RaceCowl, the addition of a Holder and Bracket was necessary. The installation itself is simply a matter of fastening two bolts to a homemade Holder.
How was your experience with it?
The car passed inspection with no problems. The LEDs from License Plate Light are bright enough for the tail lights and Brake lights.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Tandem seatBelt cover
I chose gold for the Seat cover because I have a uniform color of gold. I like the texture and the high quality feel of the cover. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Choose a different Type
I was thinking that most of the Blinkers were Round Type and not face White, but then I found this one and bought it.
I found out later that the OEM went to the trouble of using bulbs even though they are LEDs.
So I bought LED Bulb from Mercari and Relay for LED. (OEM was not allowed to do this)
It was something that cost me an extra Gold.
View detail
Stable abalone
The way it glows is very Beauty.
Compared to OEMs, this should definitely be changed.
They just put it on. (Lol)
I would love to have a choice, but currently only in Lens colors.
View detail
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI GSX-S1000, SUZUKI GSX-S1000S, SUZUKI V-STROAM, SUZUKI BURGMAN400, SUZUKI GSX250R, SUZUKI V-STROAM650XT, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM650, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM1050, SUZUKI GSX-S1000GT
Atmosphere changed.
Since I changed the Handlebar, I also changed the Bar End. View detail
Washer diameter is Small
I used a 25mm Spacer to adjust the angle of the windshield on my CRF250RLY50, so I used this washer when I changed the fixed bolt.
The OEMScreen Fixing Bolt has a 13mm diameter UrethaneWasher and the color is Black, so I purchased this BlackWasher, but the diameter is too small, so I am not sure why. Even if the color is different, I would rather purchase a regular Stainless SteelWasher to protect the UrethaneWasher, because I can choose various sizes.
However, this BlackWasher itself is a very good quality product.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CB650F, HONDA CBR1000RR, HONDA CBR650F, HONDA FORZA, HONDA FORZA, HONDA GROM, HONDA HORNET600, HONDA HORNET900, HONDA NC700S, HONDA NC750S, HONDA NM-4, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, SUZUKI GSR750, SUZUKI GSX1300R, SUZUKI GSX1400
Mounted on CB1000RBlack edition
Only Bar End by posh has been around for a long time.
Not used.
Large width can reduce vibration.
Black chrome color is available.
It's cool
Even if you don't put Screw lock on.
It rarely loosens!
Recommended
View detail
Beautiful!
I'm glad I replaced it because it's bright and clean.
Visibility from vehicles behind is also good.
View detail
Black stainless
When replacing the disc with a new one, the lock nut for fixing was replaced with this Stainless black one.
It is a little pricey in terms of the number of units used, but I am satisfied with the appearance because it is rust-resistant Stainless Steel and Black, which makes it look beautiful.
View detail
POSH Faith Posh Face Repair Lens Packing
It is a well-known Manufacturer and the product is well made. View detail
I want to increase the amount of protrusion.
Used to extend Y's Gear's LED Blinker.
The bolt on the Blinker side is long, so the supplied bolt was shortened by about 6mm for installation.
View detail
An Experience I Learned Firsthand (;・∀・)
When I bought SR400, British custom was the mainstream, and I also liked to install CABTON Exhaust System. Of course, I was young, so it does not correspond to Japanese Vehicle Inspection.
I had put it on without carburetor setting....
This is what happens.
Symptoms
Idling Rotational instability
I thought the ▲ sound was dull→Cool. (;・∀・)
▲ inadvertently stalls→ mistakenly thinking this is a taste (-_-;)
▲AfterFire a series of fires during embrasure
I would be ashamed of myself today.
Cause
The resistance of the Exhaust System changes against the intake from the air cleanerretc. and the adjustment of the Carburetor is out of setting.
→The point is that the balance of the combination of a good exhaust system + normal air cleaner is bad and the fuel mixture is out of balance.
It means that the mixture is thin.
As expected, I couldn't ride the car as it was, so I decided to try Carburetor setting (laugh).
Carburetor setting
The method of adjusting the ratio of air/fuel mixing (air-fuel ratio) in the engine. 。 If the air-fuel ratio is not right, the fuel cannot be burned properly and the engine will not be able to deliver enough power 。
In the worst case, it will lead to Engine failure.
The parts used in the Carburetor setting and their roles.
1:Main jet →Large action around Axel opening 50%~.
2:Slow Jet (Pilot Jet) →Engine hangs and affects running at low openings.
3:Air Screw (Pilot screw) →Since the scope of responsibility is covered by Slow Jet, if the Setting does not appear by adjusting Screw, the Jet is replaced, and so on.
4:JetNeedle clip step→Clip step up makes it thinner, clip step down makes it darker effect. 。 Adjust the sharpness of the blow-off from a physical point of view.
I thought I'd try 3 and if it didn't work, I'd try 2. →3 didn't work (laughs), so I tried 2.
Incidentally
What are the symptoms of a thin Pilot Jet? Throttle opening 1/8 to 1/2 →.
Breathing, Knocking, Stalling, Staggering, Lagging, Rattling, Poor acceleration Dark Idling Unstable rotation Light Idling Black smoke, Dull sound, Stalled after a while......just the way it is (laughs)
There are three types of Pilot Jet here.
・#48
・#50
・#52
The standard was 42.5 so I will try from the darker side.
Here's how each one turned out.
No afterfire or stalls.
... ##50→Engine takes, but Plug is completely Black.
... ##52→ Too dense to be Engine.
After that, when I ran, the explosion naturally eased up and I was in good shape (lol).
good point
◎Main jet:6 types from 165-190, Pilot Jet:3 types from 48-52:The number of component points that are in Set, so you don't have to worry about Setting with OEMcarburetor.
◎They are easy to obtain, which is helpful for Setting beginners. It is difficult to get Jet individually.
Point
You should check the number of OEM or current Main jet and Pilot Jet. It will give you an idea of what to do from the current situation.
It is better to have several plugs, because it is difficult to reuse a plug if it is too dark and too black, because the burn color of the plug confirms the Setting.
If it is a single cylinder, you can do it by yourself because it is only one carburetor. Especially if you have an external exhaust system and it is not working well, I think you should do the setting.
View detail