KOSO Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

[Rough Craft ION] Ultra-Small LED Blinkers

KOSO

08 Jan 2024

KOSO Round and Round Kick Pedal [CUB MONKEY Series]

Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA cub, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA cub

Japanese Webike user

5/5

Pimp to LITTLE CUB (carburetor)

[How is it used?
Normal kick is dirty and needs to be replaced
Was the one you received as per Image?
Plating is thicker and looks better than the photo.
Was the installation difficult?
Just a normal exchange.
How was your experience with it?
I was worried about interference with the Exhaust System, but there is enough room for a Large
I'm using WirusWin's RODExhaust System, but NORMAL would work too.
[Included Parts:were they on?
Screw for fixing
[Was there anything that disappointed you?
I'm a little concerned about it hitting the Side coverretc. because it falls too far inward when it's tipped over.

I have no complaints about this level of quality for a few hundred yen more than the OEM compatible product. View detail

KOSO

14 Nov 2023

Big Intake Manifold

Fits: YAMAHA BW'S125, YAMAHA BW'S X, YAMAHA BW'S R, YAMAHA BW'S 125, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X

Japanese Webike user

5/5

It was almost almost Bolt On.

It is a convincing creation, as one would expect from KOSO.
The connection surface with the Cylinder is not distorted at all, and the Injector slot is also very precise, neither loose nor tight, just fit (although it takes a little bit of hang to insert it because it is too just fit).

The only thing that needed to be done was the processing of the OEMBracket shown in the photo, as per Title. Almost Almost." It was Bolt On. View detail

KOSO

12 Nov 2023

Racing Element

Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X

Japanese Webike user

5/5

Changed from Red to Black

[How is it used?
The same product in Red was used, but due to the increase in mileage and the change in body colorImage, it was changed to Black.

Was the one you received as per Image?
The bolt has been changed from this product's Included Parts:to Posipolini's M5 Bolt, and the black-colored Filter Frame has been changed to give the image a sense of massiveness.
Black suits Monotone's body color.

Was the installation difficult?
I have been using the bare spec. without OEMAir cleaner cover for some time, so I can replace it with Bolt On.
Since the Bolt on the Left is deep, there is a hole for maintenance on the Cowl, and if the Cap is removed, it is easier to turn the hexagon.
I leave the Cap off because of how often I change it due to weather.

How was your experience with it?
We have been using this product for some time, and when we use a new product immediately after replacement, we feel good about the Response.
It also goes well with the BEAMS R-EVOFull Exhaust System.
The intake sound is pleasant.
We are currently using the higher density Filter of the two Filters.
Since a low-density filter can be replaced by disassembling the filter frame, a new low-density filter will be attached to the removed Red, and the Red will be reused in a form that can be changed depending on the situation.
The filter I used does not have any tears etc., so I think I can reuse it by washing it.

[Included Parts:were they on?
Includes six M5×40mmBolt.
The length is long enough to accommodate the thickness of the OEMCover.
I have changed to Posipolini and am not using it.
The Instruction Manual describes the PowerCheckCurve, and the changes in usage are clearly visible in the Graph.

[Was there anything that disappointed you?
Not to disappoint, but there used to be an inexpensive product that was for sale, without Filter Frame and with only 2 Filters, but now this Quantity:There is only Set.
It would be great if you could resell it since it is a consumable item. View detail

KOSO

10 Nov 2023

Mini3 Digital

Fits: その他

Japanese Webike user

3/5

Buttons are hard, so operating them while driving is a bit dangerous.

There is a clock in the GSR Meter, but since it can only display one thing, I can't see the clock when it is in TRIP view, and it is a pain to switch positions at any time, so I bought this one.
I also bought one with a Thermometer and a voltmeter.
The size is small and good, but the button is just too hard. 。 And at this price of over 6,000 yen, I wanted it to be a radio-controlled watch.

Visibility at night is no problem at all.
The Large Gap on the watch is less than a month, but nothing special.
I think the attached Harness should have been about 300mm longer. 。 It seems that many vehicles probably can't reach LimitBATT, and I couldn't either.
The feeling of using the Others is neither particularly pleasant nor unpleasant, but it is a product that has been sold for a long time, so I think it has a certain reliability.
Personally, I had installed a Kaedere USB with voltage display function separately as a function, so the clock and Thermometer were enough, but this product is connected directly to the BATT, so it is a little fun to see the error.

The Thermometer is installed in a position that does not interfere with Cowl, Destruction and Wiring, but it displays about 2°C higher than the outside temperature system on the road.
I am not sure if this is the correct value or if there is an error in performance, since it is the same no matter how the position is changed, but I am using it as a guide.
And it's usually a clock display.

It is a reasonably priced product and I would like it to last about 3 years. View detail