Reviews
Genuine SP Takegawa Master Cylinder Lever for Honda Monkey 125
I specifically purchased this Kitaco lever as it is a billet one and not a steel one that came on the bike. The customer wanted a billet lever as a replacement anyway due top asmall fall and the lever got scratched pretty badly. I looked a t a few other brands but finally found that SP Takegawa did a cracking deal on this lever so in my basket it went. It was not really hard to find as I just used the search on Webike for this model and narrowed down categories. For what this is actually made of the price was slightly reflected in that but still, really good value from a great brand. With some other parts, my order was shipped using EMS and arrived in 5 days. The lever did comae in the SP Takegawa packaging and was well protected. The design is flawless and a really good take on a classic lever pattern. As this is billet, it is made from one piece of aluminium and you can see that in the lever. The quality is really stunning. A lovely smoothed out surface with plenty of meat on it so it will not break easily. Fitting this to the Monkey bike was just a matter of unscrewing the pivot bolt and replacing the lever. Nothing hard at all. It did surprise me but the lever once fitted does feel like it belongs on the bike anyway. The action is smooth and no notchiness. Very pleased with this purchase. View detail
Genuine Kitaco Well Nuts C550 M5 x P0.8 for spares
I wanted to get soem new well nuts in this size as I did not have any spares in the garage. I have not tried the Kitaco ones and at this price is was a no brainer. The price was really good and cheaper than some on the other brands I could get. I decided to get the Kitaco ones as I have had a few other parts from this brand and I am honestly, very impressed with how well they are made. With a couple of other items in my order, I had them all shipped using EMS and the package arrived in 5 days. Everything was well protected from any damage. The well nuts came in the Kitaco box packet and were well presented. They are a really neat part that everyone should have some spares as you just never know when you will need them. These were the M5 size and this is usually the size that fits with a lot of panelling on a lot of different models. They also fit a lot of factory screens too. The quality of these is not really easy to work out untli you actually use them. I did have a screen that needed a new well nut fitting so I used one of these. Definitely recommend them as they just work how thay should. None of the spinning of the thread and worked exceptionally. Very happy with these. View detail
It's best
Installation is so easy.
Just unplug the headlight and connect it to the blue service wire.
It fits perfectly with the Hunter Curve and has a good sense of unity.
The only downside is that it is not waterproof when it rains.
You need to quickly unplug the USB and close the lid.
It would be even more perfect if it was supplemented to make it waterproof even with USB installed.
thank you -------------------------------------------------- -------- Installation is so easy. Just unplug the headlight and connect it to the blue service wire. It fits perfectly with the Hunter Curve and has a good sense of unity. The only downside is that it is not waterproof when it rains. You need to quickly unplug the USB and close the lid. I think it would be even more perfect if it was supplemented to make it waterproof even when USB is installed. thank you Powered by Google Translator
View detail
Light intensity is sufficient for your needs.
I purchased this as a Rear blinker for my HPS300.
The light intensity was sufficient and no Relay replacement etc. was needed.
Use the included Sleeve to tie the wires together. It is not a difficult task, but there is no spare in case of failure, and I have not seen it in Home center, so if you need a spare sleeve, you may want to buy one from Amazon or other places.
It's a personal preference category, but I think Lens is the way to go. [Color] If there is a smoked lens model, I would like to replace it.
View detail
Rear shock absorber
I bought an original rear shock absorber for a Honda Lead 125. 2015. A good product that I recommend buying. Arrived in Almaty in 2 weeks. -------------------------------------------------- -------- I bought an original rear shock absorber for a Honda Lead 125. 2015. A good product that I recommend buying. Arrived in Almaty in 2 weeks. Powered by Google Translator View detail
Brake disk
Original brake disc for Honda Lead 125. 2015. Good product. I arrived in Almaty in two weeks. I recommend for purchase. -------------------------------------------------- -------- Original brake disc for Honda Lead 125. 2015. Good product. I arrived in Almaty in two weeks. I recommend for purchase. Powered by Google Translator View detail
Brilliant, quick delivery
Fast order quick delivery , top quality product I have made another order already . I've ordered a seat for my bike and currently look to purchase other parts ,very good View detail
Cosmo!
It will SUPPORT your hips.
It's easy to get the Cornering posture and
It also assists with Knee grip.
I am glad I installed it!
View detail
Very good
Delivery was fast, and the product was great. I would like to recommend it to everyone. Very good. Highly recommended. . View detail
RC51 Ladybird over exhaust
These are my second set of Ladyabird exhaust. My first set were the low mount GP polish titanium exhust 300mm length exhaust cannisters. These I much prefer, Oval 400mmm length for the looks and the exhaust tone. Surprised they came with a very small baffle, but the exhaust sound with baffle out is much quieter the the 300mm Ladybird exhaust. Really prefer the looks of the long oval "VS" short round cannisters .. Ladybird fit and Quality top notch. Thanks again Web japan. Kept me inform on estimate delivery and when shipped. View detail
Wife, Large joy
I bought it for my wife, who is in the early 150cm height range, because she had bought an SV650 but was concerned about her footing.
The result is a wife Large joy.
In NORMAL, I was supporting it with the base of one thumb,
When this Link Rod is inserted, the base of both thumbs will be grounded, and one foot will be sticky.
I am 177cm and I already have sticky sticky feet, stickier than my AXIS-Z that I use for commuting.
Write down the installation.
I assume you are familiar with maintenance if you are trying to do it yourself, but I hope this will be helpful to someone else.
First, you need an environment where you can hang Jack or Motorcycle.
Rear stand alone is not acceptable (since the LINK cannot be removed …).
Jacks are unstable, so it is safer to hang them if there is an environment in which they can be hung.
Also, the Exhaust System has to be removed before we can work on it,
If you do not want to use Gasket all over again, please buy a new Gasket.
14181-22D01 1pc.
14771-32E10 3 pcs.
When removing the Exhaust System, remove in the following order:Silencer→ front exhaust pipe→ O2Sensor&rarr attached to the middle exhaust pipe; middle exhaust pipe.
When you put it on, it is in reverse order.
Gasket stuck in the exhaust pipe can be pulled out with a radipen.
Please pull out the chisel with your spirit.
It seems to be the correct way to loosen the O2Sensor after raising the Fuel Tank and removing the Coupler, but I was too lazy to remove it as it was.
It was completed successfully without disconnection, but you are on your own there….
Once the Exhaust System is removed, all that remains is to replace the Link Rod.
If the Bolt of the LINK interferes with the base of the Side Stand and cannot be removed, it can be removed by lifting the Swing Arm upward.
I have not tinkered with the Fork protrusion mentioned by others, as I did not feel any particular discomfort with it as is.
It is my wife's Motorcycle and I will respond when she tells me.
I got a good deal.
If you want to improve your footing, I recommend it.
View detail
Power will be increased, but it cannot be driven on public roads.
I installed it on a 21 year old HPS300. DECATALIZZATORE As stated, this is an exhaust pipe for Race without a built-in catalyst. It cannot be used on public roads.
KITACO Exhaust Gasket XH-09 was used.
The weight of the product is about 2 kg, and since the OEM exhaust system weighs about 5.2 kg, a weight reduction of a little over 3 kg can be expected. The power improvement in the low-speed range can be felt quite clearly, and the feeling of shortness of breath under 4000 rpm is gone. The volume is very large.
The OEM Exhaust End was used as is for installation, but (perhaps due to the newer model year of the Both Sides, or perhaps due to individual differences in the product itself) the joint with the Exhaust End was too short, and the tightening with the band was not secure.
Joint gasket is made by KITACO JPK-3. (φ37×φ32) However, the outer diameter was too large, so we could not install it properly. Since it was troublesome to find a substitute, we used heat-resistant aluminum tape wrapped around GRUGRU. It looks a little awkward, so I am thinking of looking for a Gasket of about φ36×φ32.
View detail
Warm is warm
I bought it because my Over Pants that I had used for years were falling apart. the Size may have been wrong, but it was not unusable, so I used it.
It is so easy to put on and take off that it is a big surprise. I thought it was wonderful that I did not have to take off my shoes. On the other hand, I felt a little uneasy because some parts were exposed.
My fears were proven true. The draft was cold. The protected part is warm enough to be hot, but the exposed part is cooled down by the wind. This is how it feels at low speeds in town driving, so the situation may change as the speed range increases.
View detail
It was bigger than I expected.
I ordered 1 Size Large as other manufacturers do to wear inner protector, but it was too large.
I thought about replacing them, but it's a hassle and the Large also doubles as a Small, so I'm wearing them shrunk with Belt.
However, it's not a good look.
View detail
Fits: HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
I bought it just for the color.
I won't know for sure until I ride it for a while, but I bought it just for the color, so I am not particular about its performance. View detail
Fits: HONDA CB400SF, HONDA CB400SB
MORIWAKIShort TubeFlange
One of the four I ordered had to be shaved a little to fit, probably because of the BALI. For some reason, one of the bags was also in a different bag. View detail
Attachment-like
The sense of Change does not seem to have changed that much.
It is just like AttachmentCustom parts.
View detail
Fits: HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR
Exhaust manifold Gasket
I chose the cheapest one and it was perfect - no problems and no gas leakage. View detail
MORIWAKI split collar
I ordered this due to the loss of my cracked collar. After installation, it was perfect. View detail
Effective for high speed drivingLarge
I used to install something smaller than No Brand's Blast Barrier, but the Blast Barrier is superior in both form and effect. It is especially effective at high speeds. View detail