Reviews
Lightweight bar ends from KIJIMA
Lightweight bar ends from KIJIMA, ideal to save some weight while still maintaining some vibration damping efects. Can be use on both the stock steel handlebars or aftermarket aluminium ones, as it cames with both adapters type and the Allen tool also. Overall a good quality/price product. View detail
Even though it's only for car models ….
I purchased it specifically for my car model, but could not install it without modifications. View detail
It became a little Fashion.
The purpose of the parts is to make the Indicator Lamp easier to see. Of course it has that effect, but I think there is a little change in aerodynamics.
I feel strong wind pressure when I reach about 100 km/h at high speed. After installing this Visor, I felt it was reduced a little.
I recommend it to anyone who wants to do a little something better.
View detail
Used for DT50.
The cosmetics are good. The quality is not bad. 5mm shorter than OEM Product. View detail
There is a sense of security dedicated to the car model.
DL1000 V-STROM650XT ('22) The product has been installed in a
It will be used in conjunction with Hepco&Becker's Engine Guard,
The bracket of the Radiator part was a little bit hit by the Guard,
The installation was only a little difficult, but it was almost interference-free. I think there may be individual differences, so this is just for reference.
Because the connection between the Fog Lamp and the included Harness was a Flat Terminal,
We changed to WaterproofCoupler just in case.
The brightness is sufficient for an auxiliary light,
Cutline is also solid, so I don't think it will bother oncoming traffic.
Considering the price, the texture might be a bit lacking,
If you are concerned about this, you should consider another product.
View detail
I'm glad I bought it
Purchased to install SeatBackL Size. I am satisfied with the price and appearance. View detail
A quality low-profile blinker kit
The kit I purchased was well packaged and tailored for installation on a V-Strom 650. All parts appear to be good quality and ready for immediate installation on the bike. The kit includes wiring adapters to suit the bike (bullet connector to 2-pin Suzuki connector) and a new 7-pin LED blinker relay. Installation was easy for someone with moderate experience. Tools required: open-end wrenches (8~12mm), hex key wrenches (4~5mm), 10~12mm socket. The rear fender of the bike must be removed to access the wiring and remove the existing blinkers. Routing the wiring through the adapter plates, washer and nut requires patience and a delicate touch. Aside from that, it's a matter of securing connections with electrical tape and securing the wiring to the frame. The kit is quite bright and very visible, even during the daytime. The blinkers are all mounted on flexible stalks, so they should survive if the bike is dropped. Overall, I am very pleased with the purchase. View detail
I think it's good that it's cosmetic.
The installation can be done by looking at the Instruction Manual, but the Blinker connection seems to be the other way around. I am glad I read your impressions. I bought some rubber string and waterproof tape at Home center to fill in the gaps. I wish I had done a little more research to see what other manufacturers were doing, but considering the cost, it was a no-brainer. I still get muddy on wet surfaces and in the rain. View detail
sv650KIJIMAEngine Guard
KIJIMAEngine Guard installed on sv650.:Pair (for Left and Right) The part that connects the Quantity with the Lock nut is the Quantity:Pair (for Left and Right) It was difficult to tighten evenly. Other than that, it is easy. I am not sure how effective it is, but I like it because it is firm and comfortable. View detail
sv650Meter Visor Screen
I installed it on my sv650. Windproof effect is so-so. I wish it was longer and wider. Looks good and I like it. View detail
To bleed air from the Brake
Originally a Catch tank, it is used as a waste receptacle when bleed air is removed from the Brake.
I used to drill holes in the lids of plastic bottles, but it was inconvenient because the lids would break or slip off.
This product has a large hole that engages securely with the tube, so the tube does not move.
The One-Way Valve, which costs about 800 yen, makes air venting easy.
A dedicated air venting kit costs about 5,000 yen, but if you buy this product and Valve, it costs about 1,500 yen.
The capacity is sufficient for Motorcycle and it is not bulky.
View detail
Oil Filter for Grom KITACO's Clutch cover
Recommendation for those who use Grom KITACO's Clutch cover.
I replace Filter every two times, but I buy in bulk because it's a consumable item.
View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Ninja 1000SX
For Smartphone Holder installation
I bought it for Navigation and Smartphone Holder installation. View detail
Installation review
The original luggage rack was too big, so I bought it to replace it. It was easy to install and the overall finish was good. It would be nice to have a seat that fits perfectly.
After replacing it, it is compact and pretty. It says the load is 5kg, but I wonder if tandem doesn't work ------------------------------- --------------------------- The original luggage rack was too big, so I bought it to replace it. It was easy to install and the overall finish was good. It would be nice to have a seat that fits perfectly. After replacing it, it is compact and pretty. It says the load is 5kg, but I wonder if tandem doesn't work. Powered by Google Translate
View detail
Durability may be difficult.
The ease of installation was a plus.
The battery stopped charging less than six months after installation.
According to Manufacturer, it was due to age and not covered by warranty.
I hoped it would be a little sturdier and last longer.
View detail
good item
It is a grip bar that can be combined with a rebel sideback at the same time. The pure grip bar cannot be combined with the rebel sideback. I've been running 3 units of z900 rs and I always have them installed every time I buy them. View detail
Rare Other Brand Product for 6v
This is a Horn for 6V electrical equipment, which is now rare.
Since most of the vehicles have been manufactured for a long time, we recommend replacing them with OEM replacements.
View detail
Pedal cover installed
I wish it was black to match the XL1200C SPORTSTER 1200, but I painted it myself and installed it. View detail
Fits: HARLEY-DAVIDSON Dyna Convertible FXDS-CONV, HARLEY-DAVIDSON Dyna Low Rider EFI FXDL, HARLEY-DAVIDSON Dyna Low Rider FXDL, HARLEY-DAVIDSON Dyna Street Bob FXDB, HARLEY-DAVIDSON Dyna Super Glide Custom EFI FXDCI, HARLEY-DAVIDSON Dyna Super Glide Custom FXDC, HARLEY-DAVIDSON Dyna Super Glide EFI FXDI, HARLEY-DAVIDSON Dyna Super Glide FXD, HARLEY-DAVIDSON Dyna Super Glide FXD35, HARLEY-DAVIDSON Dyna Super Glide Sport EFI FXDXI, HARLEY-DAVIDSON Dyna Super Glide Sport FXDX, HARLEY-DAVIDSON Dyna Super Glide T-Sport FXDXT, HARLEY-DAVIDSON Dyna Switchback FLD, HARLEY-DAVIDSON FXR 2, HARLEY-DAVIDSON FXR 3, HARLEY-DAVIDSON FXR 4, HARLEY-DAVIDSON Softail 15th Anniversary Fat Boy FLSTF, HARLEY-DAVIDSON Softail Cross Bones FLSTSB, HARLEY-DAVIDSON Softail Custom EFI FXSTC, HARLEY-DAVIDSON Softail Fat Boy EFI FLSTFI
Parenthesis is good.
It is easy to install and looks great Parenthesis. View detail
Screen is very easy to read
If a USB Socket is attached to the Handlebar, it can be easily connected. View detail