Reviews
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Necessary thing
Защита маятник нужная вещь. По просьбе друга купил ему . Она прекрасно подошла на его Honda Monkey. Теперь он доволен и радуется использованием. Отличная недорогая вещь. Рекомендую всем.
The pendulum protection is a necessary thing. At the request of a friend , I bought it for him . It fit perfectly on his Honda Monkey. Now he is happy and enjoys using it. A great inexpensive thing. I recommend it to everyone.
----------------------------------------------------------
Protecting the pendulum is the right thing. At the request of a friend, I bought him. She perfectly approached his Honda Monkey. Now he is satisfied and rejoices in use. A great inexpensive thing. I recommend to all.
The PENDULUM Protection is A Necessary Thing. At the Request of a Friend, I Bouught it for Him. It Fit Perfectly on His Honda Monkey. Now he is happy and enjoys using it. A Great Inexpensive Thing. I Recomment it to EVERYONE.
Powered by Google Translator
View detail
I wonder if I need it to replace the carburetor on the CUB.
Since the replacement of the carburetor in the CUB forced us to replace the cook with an OEM fuel cock carburetor, we had a little choice and thought about it.
(1) 2 system Cook replacement
(2) No Cook with Tank set to Custom.
(3) No Cook with Tank as one line with After stuff.
(4) On/OffCook installation with one Tank system.
So, for now, we decided to just use Cook, which is cheap and doesn't cost a lot of money up front.
The mounting position was extended with Bracket and temporarily attached. It was usable as usual. Not bad for the price.
I just put it on, so I don't know how durable it is. Therefore, I gave it 1 star minus.
View detail
Fits: HONDA CUB, HONDA CUB, HONDA CUB, HONDA CUB
Required for Engine conversion
I purchased the Crankcase because I needed it after the engine was converted to a Large type.
I would have preferred a foldablefootpeg if I could have, but I had no choice.
Brake pedal is also a Quantity:Set, and is required in the Quantity:Set sales are Reasonable and appreciated.
Perhaps Pedal plating is more prone to rust than domestic plating, so maintenance will be more frequent.
View detail
Required for disassembly work
It would be nice to have when doing overhaul.
I have searched and found that many people reuse the Crankcase gasket, but I think it is better to smooth the Crankcase gasket with oil stone and replace the gasket to prevent oil leakage.
I studied the initial overhaul with New Engine.
View detail
Fits: HONDA shirley, HONDA dachshund
I put it on CHALY.
We have a product BALI, so we have to prep it.
Painted. I think it is good for the price.
View detail
Fits: HONDA dachshund, HONDA Shirley 50., HONDA Dax 70, HONDA Shirley 70
CHALY That!
CHALY I bought it to make a thicker footprint of the I am satisfied with the cheap price. View detail
Fits: HONDA MONKEY/GORILLA, DAX, CHALY, CUBetc. vehicles equipped with Horizontal TypeEngine, HONDA MONKEY, HONDA GORILLA, HONDA CHALY, HONDA CUB
This is faster and quicker than a poorly designed Engine.
I bought this once because the Engine I put together myself was sluggish no matter what I did.
I was wary of the Chinese Engine or ……, but it worked on the PON without any problems.
I don't know about durability etc. yet, but I didn't have any difficulties except for the wiring process on the car body side.
CUBOEM's SeesawShift Pedal can also be used normally.
However, as mentioned earlier, if the supplied Harness is not used, it is necessary to modify the generator/StarterWiring on the car body side to Bullet Terminal.
Especially with Cell motor Harness, you should buy a Bullet Terminal that is compatible with thicker Cable because you need to process the thicker Wiring for Starter on the Grounding Wire.
View detail
More than Bore up.
Swapped from SUPER CUB 50 OEMEngine
With Engine itself pon
The carburetor came with a 16π? The carburetor came with a 16&pi carburetor, but I used a pc20 funnel and a YOSHIMURA intake manifold. The rest is KITACO clutch wire and clutch lever.
FSprocket exchanged R for 15, or was it 38?
I'm not sure about Included Parts:as you don't mention it specifically,
I tried to use the Indicator and found that there are two in the box, one for the carburetor side and the other for what? I tried to use the Indicator and found two in the box, one for the carburetor side and one for what? Well, I don't need it because CUBOEM13π is obviously not enough for 86cc lol.
The original engine oil was replaced with G2Oil after warming up and breaking in salad oil.
I don't know about the attached carburetor, but after breaking in, full throttle, well, thanks to the pc20, the CUB is no longer a CUB. 60kmMeter is swept away in about 5 seconds.
Another AA01 centrifugal 3 speed 88ccHigh Camshaft18πcarburetorOthersSprocket uses the same size, well, Gold amount is more expensive to bore up, so it is still recommended for those who want Manual clutch.
Installation can be easily done by one person.
The difficult part would be to modify the terminals to match the Engine side when using OEMHarness.
I think it would be more of a hassle to replace even the Harness.
As you may have read in other sites or on our side, the first time GEAR enters the market, it is very reluctant to do so.
Neutral goes in for me, but I often have trouble returning to 1st gear from 2nd gear.
The wiring diagram in the Instruction Manual was Harnessfor MONKEY, but the color was the same in CUB.
I don't know how durable it is since it is currently just loaded, but I hope it was a hit.
View detail
Fits: その他 Universal
Less than six months later, this is what you get.
I bought it because there was room in the mounting area.
I bought it thinking it was made of Gold because it was more expensive than other companies' products, but it was inferior plastic.
Thanks to your help, I was just running, but the bolt of the Cover cracked and shattered from the receiving part of the bolt.
The structure is also bad, so if this part cracks, the Filter will not be routed through at all!
I got fed up with all the shoddy Powerfuls with Covers from all the Manufacturers, so I eventually went back to OEM.
View detail
Fits: HONDA MONKEY, その他 , HONDA Shirley 50., HONDA Dax 70, HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), その他 Can be used in a wide range of vehicles with 4-pole terminal regulator specifications., HONDA Shirley 50., HONDA Dax 70, HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), その他 Can be used in a wide range of vehicles with 4-pole terminal regulator specifications.
Voltage increased slightly when running.
I bought this Regulator to review the ignition system because the MONKEY was malfunctioning. It was not the direct cause of the problem, but the original one was so old that it seemed to be worn out. After replacing it with this product, the voltage when driving went up a little. It is a little bit larger than the OEM product, but I had no problem installing it. View detail
Fits: HONDA DAX, HONDA CHALY
Tanaka Dax fender
Fitment is great and paint finish is beautiful. Fitted on a USA spec 1970 Honda CT70 that I am converting to Japanese spec. View detail
Fits: HONDA little cub, HONDA Super Cub 50, HONDA Super Cub STD-92 (12V model), HONDA Super Cub STD-92 (12V model)
Don't expect quality.
I had a headlight unit from another company attached to my LITTLE CUB, but after more than 10 years of use, the plating was peeling, so I replaced it.
The installation itself was not a problem, but the Socket does not seem to be durable.
I installed it at the end of September 2023 and from the beginning of December 2023 the Headlight started flickering occasionally and a few days later the Headlight disappeared while driving and became completely unusable.
I suspected that the Valve was out of ballast and tried to remove it, but for some reason it would not come off. When I pulled it out by forcibly turning it with pliers, I found that the Socket had melted. The melted valve had lost contact with the valve, and the resin was further burnt.
Since the price is reasonable, I think it would be better to use OEM products like Large for Socket and Valve, with Socket and Valve as extras.
View detail
Fits: HONDA CUB, HONDA MONKEY, HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Easy to change carb position
Casting seems very strong, however the casting port hole for the engine side is not perfect. I'll need to use a Dremel to tidy up the port as can be seen in the photo. Otherwise I feel it will not produce as good as power as it could. Installation is very easy on monkey due to being able to position the carb however you like. Product was priced well just a shame about the casting hole. Webike is always very quick with shipping A+ View detail
Don't buy it.
I bought a DID 530VX3 to Crimp an existing Chain to replace the Chain, but the Crimp pin broke off and I could not Crimp it.
I managed to cut the chain by using Leutor to drop the crimp at the end of the chain and then cut it, but it seemed to break.
It was not of the least use and dumped the Gold down the drain.
I bought a similar Tool from Amazon for about 3,000 yen because the parts seemed to be usable, and it broke the same way, so I assume the contents are the same.
I ended up buying DID's Kashimaru-kun and did the Crimp, which is an OEM-specified product, and was able to do the Crimp easily and without any danger at all.
View detail
Cute colors.
[How is it used?
Purchased for 4Lfor MONKEY.
Both the OEMTank and my previous Chinese Tank have rusted and I bought the Tank because it was cheap. The other Tank will be rusted out etc. while I use this Tank.
The color was a lovely Yellow color, which was the deciding factor in my purchase.
Was the one you received as per Image?
I am glad that the color was exactly as I had imagined in the picture of the product.
Unfortunately, it looked like the inside of the Tank was rusty, although only slightly.
I think the cospa is good.
Was the installation difficult?
Simply remove the OEMTank and attach it in the same manner.
Rubber parts for the tank are removed from the OEMTank and reused.
It is not that difficult a task.
I thought I had the Fuel Cock on tight, but it started leaking when I added Gasoline, so you should be careful and make sure it is closed tight. I re-tightened it and the leak stopped.
How was your experience with it?
First of all, it looks cute. As soon as I put it on, it felt right. I was glad I chose this one, because I could have bought a paint base, but it would have been too much trouble. If I get tired of it, I will paint this tank.
The size is perfect, and I'm happy with it.
[Included Parts:were they on?
Fuel Cock and Key x2pcs. and 2 types of GasolineTube were included.
[Was there anything that disappointed you?
It is supposed to be new, but it looks a little rusty inside the Tank, which is disappointing. Other than that, I am satisfied with the cosmetics.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Focus on appearance
[How is it used?
Purchased for 4Lfor MONKEY.
I was looking for a down type muffler because the exhaust system and carburetor seemed to interfere with each other when replacing the carburetor.
Among them, I bought this product because it looked cool and was reasonably priced.
Was the one you received as per Image?
The color and shape were exactly as shown in the Image.
Was the installation difficult?
It is not difficult.
At first I thought the exhaust bracket was not long enough, but I was able to install it by installing the bracket near the with Gasket very loosely and tightening it after applying the bracket. I am glad that I was able to install the bracket, although I feel that it is not the perfect size.
There was no Instruction Manual for handling, but it was Large sturdy.
How was your experience with it?
I chose it for its looks, but when I actually installed it, I thought it was even cooler than I had expected.
I'm a little worried that the bracket part is not the right size, but so far I have no problem with it.
The sound was quite loud. It's not like an explosion, but the sound was on a level that might bother the neighbors.
I would have liked it to be a little quieter.
[Included Parts:were they on?
There were none in particular.
[Was there anything that disappointed you?
The size of the product is not Exactly, and there was some uneasiness when installing the product.
It is a conforming product, so it should be fine, but I wish it had a more Exactly feel to it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: その他 Universal
Broke after 3 months.
AF05E with AF35carburetor installed
Cover part is Material:Plastic, and I noticed that the Bolt was cracked from where it was stuck.
Fortunately, even if this part breaks, it is sucked in via Filter, so we have no choice but to use it as a normal Powerful!
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Replacement for OEM grommets
I got these as a replacement bush for my new fenders. They fitted much firmer in the holes and are a excellent price vs oem. Super basic and easy to install. A+ View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA MONKEY
Great oil gauge
Help add to the final look of your motor with this machined oil dip stick. same length as the stock 50cc but adds a little bit of class to the overall look of the engine View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Chain Slider Protection
Rubber protection boot feels high quality. Installation was very easy and simple, the fitment isn't 100% perfect around the chain cover bolting position but can hardly notice id say 9.5/10. It will protect my swingarm from my chain perfectly. Packing was very nice and shipping times from Webike is always very fast! Thank you Webike! View detail