Reviews
Easy dress-up
I put it on for dress-up and to reduce hand numbness etc. I could have used Universal Product for just the tank side, but I wanted the SIDE part closer to the frame, so I went with this product. The material is thick and cushiony, and the adhesive surface is super strong. We are planning to go to Long to see the effect of reducing fatigue. View detail
It is a super Recommendation. Super convenient.
Underbone Frame cover for CT110 HUNTER CUB (where you straddle when you ride) is considerably wider and flatter than the SUPER CUB, and you will be tempted to load it with luggage! (Lol) So, I was thinking of installing a CenterCarrier, the so-called Vietnam Carrier. Although none of them seemed to fit the bill, I had narrowed down my choices and was about to order one when I saw this CenterBasket that a YouTuber had installed on his CT110 HUNTER CUB, "That's it! I was so peeved that I sought it out and bought it.
When you use it, it is super convenient! A little shoulder bag (8LiterSize in photo) Of course, if you hang the attached Small TypeNet on the top surface, you can put a PETBottle or something in it and it will not fly out. If it is just a CenterCarrier, you have to fix it with Net or Rubber string, but with Basket, you can put it in and it will not fly out. (Place) Only. This convenience is addictive.
The only drawback is that I will not be able to straddle the Underbone, but I originally straddle the Rear cargo bed like a normal two-wheeler, so it is not a MinusPoint for me.
Also, I am putting a twist on this Basket by placing the Helmet on it, so the Frame (Made of iron) The top surface of the helmet is covered with double-sided tape and cut to a suitable large size and attached to the top surface of the helmet to prevent scratches on the helmet.
View detail
countermeasure against standing up
Installation is easy
I expect that Damage at the time of the fall will be limited to the smallest limit.
View detail
For dress-up purposes from OEM
[How is it used?
I was looking for a non-OEM Exhaust Cover because the OEM Exhaust Cover was dented in a fall, so I purchased one.
Was the one you received as per Image?
As per Image
Was the installation difficult?
I also purchased the OEM 18293-MN0-000 and worked on it.
How was your experience with it?
I am concerned about the clearance and strength of the hooking area with the Exhaust System side.
[Included Parts:were they on?
BrandSticker and other Included Parts:were all included.
[Was there anything that disappointed you?
That Sticker didn't put it up, even in a good way. (If you want to use Carbon fabric as it is) I thought the Brand logo was stuck on the product image without any border, not Sticker, even in a bad way.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Whoever thought of this is amazing!
I have a motorcycle in my storage room, but when I replaced it with a Kawasaki Z400→KTM 890DUKE, the storage position became very severe due to the increased length. I bought this product because it was recommended to me by a friend of mine who uses it. I was hesitant to buy Stand Mover, but I'm glad I did. I don't know if Large has been around for a long time, but whoever thought of it is amazing. The floor is concrete, so I don't have to worry about it. I think the price is high, but I can't replace it with anything else, so what can I do? View detail
comfortable tank pad
About quality and texture : very comfortable and soft About the feeling of use : increases our grip during rides Products to buy together : none Difficulty of installation : very easy, just remove stickers and stick to tank Cost performance and comparison with other products : higher price due to good quality About shipping and packaging : neatly packaged, fast shipping Any concerns, cautions, or advice when purchasing : clean the tank surface before apply tank pad View detail
Design is fine, but ...
We like the design and use AERO Type.
My MONKEY125 is overdriven and travels about 20,000 km per year.
The car is 99% on road, so it is not running in a place with severe vibration, nor is it experiencing abnormal body vibration due to breakdowns, etc.
In fact, this is the third one I have purchased, because after 10,000 km or so, the area around the mounting point is cracking.
1pc. eye near the mounting Quant.:Pair (for Left and Right) The second time, the Right Side crack was quite large when viewed from the front and was repaired once, but as a result, the cracks expanded and became larger and larger.
Therefore, this time RType was purchased as Repair Parts because it is cheaper, and the original AEROScreen was transplanted.
I would like to see a little more durability, because I can't easily cheat on my MONKEY125 with another Bikini cowl, as it has become the identity of my MONKEY125.
I think it would be good for owners who are not over-driven like me, so if you like the design, you may purchase it.
View detail
Mirror Bracket board is weak and shaky.
The Mirror Bracket board is clearly not strong enough; the Loose hole is too long and the board thickness is too thin, causing twisting and shaking. I was disappointed that I could not take advantage of the long length of the bar. I felt I had made a mistake when I realized this only after purchasing and actually running with the product. I am very sorry, but I bought another company's product. View detail
Unfortunately, the length was good but the shaking while driving was not calculated.
Since the Meter on MT-07 is directly above the Handlebar, I wanted to place my phone and Car Play Monitor on the upper side of the Meter, so I chose this product with a longer bar length.
The length was good, but the Mirror mount bracket was not able to support the weight of the phone and CarPlay Monitor due to the Bolt1 pc fastening, causing it to shake considerably while riding. As a result, I moved the length of the bar to a shorter length so that it would be closer to the fulcrum. Since it still shakes, I am planning to change to a Bolt2-Bolt Type of Master CylinderClamp from DAYTONA and others.
View detail
It can be installed on 24 years model without any problem.
When switching to the ZX-6R, I was considering where to mount the Smartphone Holder and USB power supply, and I chose either KITACO or WorldWalk's mounting bars. I chose the one from WorldWalk considering the possibility of installing an OEMSteering damper in the future.
Although there was no information on the compatibility of the Top Bridge with the 24 model, we compared images with the 23 model and decided that there would be no change in the Top Bridge.
View detail
Handlebar for high Smartphone Holder with Simple
I am installing it on Mirror to mount a PeakDesign Motorcycle mount bar. So far, it has been installed with no problems at all. View detail
Thanks to the inventor!
[How is it used?
2.Purchased to put a 2.3Meter Motorcycle in a 5Meter wide place.
I mean, if it weren't for this kind of product, I might have abandoned the purchase of Motorcycle...
Was the one you received as per Image?
It was as strong and well made as the Image.
How was your experience with it?
It can smoothly move a 260Kg motorcycle and is a satisfactory product.
[Points to note]
Quantity on front wheel:If you want to set and move the device, you cannot make it Smooth until you learn the hang.
Adjust the direction of the front wheels so that both rollers of the Motorcycle Mover are grounded and can turn Smoothly.
Other items that would be helpful
Depending on the shape of the Side Stand, the orientation of the Stand Mover may not be stable.
View detail
Can also be installed on CROSS CUB50!
If a rear box such as GIVI is attached to the rear carrier (cargo bed) of the CROSS CUB50, it will be too tight when the backpack is carried on the back.
So we purchased the Rear Carrier in the hope that we could extend it additionally.
The applicable model was CROSSCUB110 Year:18-21 Model:JA45, but it is expected that CROSS CUB50 (Model:AA06) will also be attached.
No instructions are included, but it is as easy to install as it looks.
We were able to install it on the CROSS CUB50 as expected.
The steel carrier is a round bar, so the mounting base of the Rear box can also be attached.
We were able to install a GIVI Rear box on the extended cargo bed.
The backpack no longer interferes with the rear box, improving comfort and load capacity.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800
Reduced heat in the thigh area
The W800 has a Bevel Gear Cover that gets very hot in the summer, but this part makes it slightly better.
Installation is easy
However, the price seems too high, even for Carbon.
View detail
The best item to protect your muffler
In Korea, full exhaust muffler structure changes are no longer possible.
As a result, the 4-shot muffler of my cb1100ex became rare.
This is the only item that can protect an expensive muffler in case of a fall.
The product photo looks like rubber, but it's made of hard aluminum so it doesn't break easily. -------------------------------------------------- -------- In Korea, it is not possible to change the full exhaust muffler structure. As a result, the four -foot mufflers of my CB1100EX have a scarcity. It is the only item that can protect expensive mufflers in all cities. The product photo came out like a rubber, but it is hard aluminum, so it doesn't break easily. Powered by Google Translator
View detail
Grip is good.
I bought this for forest road touring with CRF250rally. The first purpose is to prevent scratches because I have to scrape it. I am satisfied with this point. The second purpose is to have a subtle grip and a subtle slip. This is not a problem with the product, but the grips are too good. In other words, a Sticker level grip is fine, but for those who value grip, this product is satisfactory. I don't use both grips for touring on forest roads, but only one of the grips. I don't know about the durability and weather resistance yet. View detail
I've changed my mind
The cowl is a bit on the large side, but its unbalance might be good. 。 You may have your preferences, but I'm ok with this. View detail
Stylish Carrier
[How is it used?
This Carrier was introduced for the installation of a Rear box for Touring.
Was the one you received as per Image?
Since the steel bars used are rather thin, it looks slender at first glance, but the structure is well thought out, so I think the robustness is not a problem.
Was the installation difficult?
The four bolts on both sides of the tail cowl are removed and attached with the special bolts that come with the Carrier, but this time, the Multi Saddle Bag Support of the same manufacturer is used. (Item number:wca-11-duke) The Multi Saddle Bag Support itself can be used in place of the Spacers. The Bolt was installed using screw lock fluid, in case it loosens due to vibration. The bolt was installed using Screw lock fluid to prevent the bolt from loosening due to vibration.
How was your experience with it?
I have not installed the rear box yet, so I don't know how it feels in detail, but it is convenient because I can grab the Carrier and move it around the vehicle body when I need to maneuver it. Also, it does not shake even if I support the car body by grabbing only the Carrier. Also, there is no difference between the top of the Rear Sets and the Carrier, so it seems to be very easy to use.
[Included Parts:were they on?
Four Bolts and four Spacers are included.
[Was there anything that disappointed you?
I have no complaints about the product itself, but it would have been better if it had a projection for the Loader Hook. Also, I would like to see at least an Instruction Manual attached to the product. It is a simple structure, so it is possible to install it without the Instruction Manual.
Other items that would be helpful
The instruction manual is not included in the package, but a note of caution is included to ensure disclaimer and protection on the part of the manufacturer.
Items to buy together:Screw lock fluid
Opinions and requests to the manufacturer:Please give priority to user-friendliness and include the Instruction Manual in the package, rather than protecting the manufacturer's interests.
View detail
Used for GIVI B37
The circumference is a bit large, but it is acceptable.
Depth is not a problem.
View detail
Recommendation for those who want to increase the loading capacity as well as Tandem
I purchased this for CanTwo which also serves as Tandem.
I was looking for something simple and compact, not too large.
Good to be able to move the caRear box even just a few centimeters.
There are only a few places to install it, but I think the Access to it is Large strange.
In particular, the OEM carrier needs to be shifted to align the screw holes, and the air cleaner cover needs to be removed to loosen the bolt on the suspension, and part of the cowl needs to be removed to do so.
Still, once you can remove it, the rest is easy, so if you are confident, you should have no problem.
I am dissatisfied that the price is a little high for the product, but the quality is quite good, so I am satisfied overall.
View detail