Reviews
Satisfied with the build quality
Compared to the OEM Product, the GEAR is twice as thick, so it seems to be perfectly strong. The Bolt of the OEM Product was loose when it was replaced, but there are no loose parts in this product, so it seems to be safe to use.
However, I was quite hesitant to purchase it because of its high price. However, the price was too high and I was very hesitant to buy it,
The replacement was also a simple installation and the symptoms before the replacement were improved, so I think it was an inexpensive purchase for the future of my Motorcycle life.
View detail
Fits: HONDA CB1100R, HONDA CB750C, HONDA CB1100F, HONDA CB750F, HONDA CB900F, HONDA CB1100F, HONDA CB750F, HONDA CB900F
ExactlySize
We decided to replace them together with the One way clutch.
No Oil leakage and it feels like a perfect fit.
View detail
Fits: HONDA CB1100 RB, HONDA CB750 F, HONDA CB900 F, HONDA CB1100 RB, HONDA CB750 F, HONDA CB900 F
Will ContactBase be split?
When I mounted the ContactBase on the key cylinder and went to mount the BaseCover, a part blew off with all my might. For a moment, I did not understand what had happened, but when I looked around, I saw that the ContactBase itself had separated and the copper plate inside had blown away. I put the copper plate into the hole of the base, aligned it with the convexity of the key cylinder, and was about to install the BaseCover when I heard a rattling sound from inside the base. I had no choice but to glue the Spring and the copper plate together so that they would not come off and I was finally able to install the Cover. I hesitated to mount the ContactBase on the car body because the claw of the ContactBase (a turn stopper or positioning) was broken when it separated and flew off, but I had no choice but to mount it because the car might stall on the way without it.
The OEM ContactBase is structured in such a way that it cannot be separated even if you try to separate it, which is not the case this time. Although I trusted J's and purchased the product, it was clearly a poor product. It may be that I happened to have such a defective product, but I wondered if they inspect the actual product at the time of shipment.
View detail
I highly recommend it.
Installed on a CBX1000.
The vehicle in question was in trouble because, as OEM, it does not even have Passing, let alone Hazard.
The staff at the motorcycle supply store recommended this product to me and I immediately decided to purchase it, and I also ordered the blinker relay because the OEM blinker relay would not work with Hazard due to capacity limitations.
The work only required replacing two OEMCouplers, so the process was completed in about 40 minutes.
To install the potentiometer, a 5mm hole is drilled to prevent it from turning around. However, it was difficult to position it, so I cut a hole, wrapped a rubber sheet around it, and fixed it with screws.
Material texture and Mark printing were OEMLevel and fine. I don't ride in the rain, so waterproof property is unknown.
View detail
Fits: HONDA CB1100F, HONDA CB750F, HONDA CB900F, HONDA CB1100F, HONDA CB750F, HONDA CB900F
For OEM renewal
We purchased rattan products because we cannot expect backOrder for OEM Product.
We do not know the durability or effectiveness of the product because it has not been used for a long period of time.
The OEM Product was removed and literally just popped right in.
As the Manufacturer's blurb says, we are hoping for the best.
The blue color is conspicuous, but it is usually not noticeable because it is under the Seat.
No Seal tensioned or enclosed as shown in the photos.
View detail
Fits: HONDA CB900F, HONDA CB750F, HONDA CBX, HONDA CB900F, HONDA CB750F, HONDA CBX
2nd purchase
This is the second time I have purchased from you, and as before, you have responded promptly, which is very helpful for an amateur Sunday mechanic. I have the base, so it is not so much trouble, but I think it would be good to have the Instruction Manual supplemented for the different years. Thank you for your continued support. View detail
Fits: HONDA CB1100 RB, HONDA CB750 F, HONDA CB900 F, HONDA CB1100 RB, HONDA CB750 F, HONDA CB900 F
cb750f ContactBase
Replaced due to poor contact.
I was able to replace it easily by following the Instruction Manual.
The turning feeling is also good.
View detail
Fits: HONDA CB750F, HONDA CB900F, HONDA CB1100F, HONDA CB1100R, HONDA CB750F, HONDA CB900F, HONDA CB1100F, HONDA CB1100R
Reinforced but lighter and thinner design
Just out of curiosity I bought these CB FORCE reinforced cam chains A and B. Compared to OEM 5-4-5 links per pitch this new design is thinner 4-3-4 per pitch. Also visible in the comparison pictures, the new side plate design is somewhat different. This new reinforced cam chain B is also lighter(159 grams) compared to OEM(179 grams) chain. PICTURES: New reinforced cam chain(above) and OEM can chain(below) in side-by-side comparison. View detail
Fits: HONDA CB1100R, HONDA CB900F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CB1100F
Reinforced but thinner and lighter design
Just out of curiosity I bought these CB FORCE reinforced cam chains A and B. Compared to OEM 5-4-5 links per pitch this new design is thinner 4-3-4 per pitch. Also visible in the comparison pictures, the new side plate design is somewhat different. This new reinforced cam chain B is also lighter(254 grams) compared to OEM(274 grams) chain. PICTURES: New reinforced cam chain(above) and OEM can chain(below) in side-by-side comparison. View detail
I'd rate this product as 5/5, but..
I recommend this product to anyone with a similar bike to mine. Very easy to install and works perfectly when put together correctly, but unfortunately mine didn't work at first and a quick inspection showed that one metal pin in the plastic connector was misplaced so I had to pry it open & re-install the pin but after that it worked like a charm. View detail
Fits: HONDA CB1100F, HONDA CB750F, HONDA CB900F, HONDA CB1100F, HONDA CB750F, HONDA CB900F
Satisfied
I changed OEM because it melted with heat. Better rise at high speed has improved.
It is also appreciated that it is installed without processing. If the price is a bit more affordable it is a perfect score.
View detail
a wonderful one divide(split) with very good quality and perfectly suitably the old mistakes to make forgotten old technik. this share every owner old cb900f should insert, actually, afterwards
a wonderful one divide(split) with very good quality and perfectly suitably the old mistakes to make forgotten old technik. this share every owner old cb900f should insert, actually, afterwards View detail
Fits: HONDA CB1100F RB, HONDA CB1100F RB
Large I'm strange.
Thanks to Mr. Jays who seriously builds Parts of Motorcycle more than 30 years ago.
It is regrettable that we can not compare because there is only one, but there is no Trouble.
Besides, webike was a sale period so it was a big help for Large.
View detail
Fits: HONDA CB1100F RB, HONDA CB1100F RB
It is safe in this
StarterClutch was broken once, it was fixed with a new item of OEM Parts Number, but recently the sound has come out again so I exchanged it today. Turned the cell immediately and confirmed, it was a feeling that it turned quiet and sound lightly whether it was a mood-like thing.
OEM Product will break soon and price will not become stupid so I think that I bought this product daringly.
We no longer need to worry about StarterClutch being destroyed at Touring destination.
If you get on F exchange certainly!
It is recommended..
View detail