Reviews
![Motorcycle Drive Recorder "MiVue(R) M820WD" with GPS [Drive Recorder]](https://img.webike-cdn.net/catalogue/images/133556/25864484driverecoder_TS.jpg)
Very good.
Motard bikes do not have space to store the body, and I was concerned about the large size of the body. I chose this model because the body is small and the connecting cable is SMART and thin.
I was very anxious about the purchase, but I was able to install it without any problems, and I am glad that I was able to use the included double-sided tape and tie wrap instead of using a bracket.
View detail
Protection Seat
If you are going to buy SeatBack, you may know that the first thing you should do is to copy the protective Seat pattern.
It would be good, if the Tail cowl is damaged, etc., and you need to replace or
When applying the protective Seat from the beginning, it may fail.
For your reference, here are some photos.
View detail
Cool?
For XSR (For SEA BASS GSX) I bought it because the color was Red and the design was good for Parenthesis. I tried to put it on anyway, and it went on surprisingly well. However, the two edges on both ends are angled, so they might come off. But I was satisfied with it in my own way, so I am glad. View detail
Fits: HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200CX R100 ROADSTER, HARLEY-DAVIDSON XL1200NS Iron 1200, HARLEY-DAVIDSON XL1200R R100 ROADSTER, HARLEY-DAVIDSON XL1200V Seven Tee Two, HARLEY-DAVIDSON XL1200X Forty Eight, HARLEY-DAVIDSON XL1200XS Forty-Eight SPECIAL Knife, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL883L Low, HARLEY-DAVIDSON XL883N Iron 883, HARLEY-DAVIDSON XL883R
Arrangement doubles the charm! Don't you agree?
It is the same Vertical type Seat as the Single Seat I am using now, and I love the design!
I am sure that a little more Arrangement will also improve the Parenthesis even more.
View detail
feeling of being tightened
The panel is simply affixed to the meter, but the gold color around the black meter stands out and makes it look tighter.
I am very satisfied with the product, although it is not visible from the exterior, so it is a self-satisfying product.
View detail
Fits: YAMAHA SR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GOOSE250, SUZUKI GOOSE350, SUZUKI BANDIT600 (GSF600), SUZUKI GSX400, SUZUKI INAZUMA1200(GSX1200FS), SUZUKI INAZUMA400, SUZUKI INAZUMA750(GSX750), YAMAHA FZS1000 FAZER, YAMAHA V-max 1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA TDM850, YAMAHA FZ400
Cool & lightweight
The Gold is not too assertive and the texture is perfect.
I am satisfied with the lighter weight compared to the OEM.
View detail
Even though it's only for car models ….
I purchased it specifically for my car model, but could not install it without modifications. View detail
Solid around Front.
No more wobbling when stopping or Start at low speeds. View detail
It's crisp and clean.
This is a change from OEM.
The installation can be done without too much difficulty if you have experience in such work as replacing the clutch lever, since there is a translation (please enter hereManual).
Also, while installing it, I felt that the accuracy of the cutting process may vary a bit, and you may be dissatisfied with the Quick Adjuster for Red and Blue. The color will deteriorate under ultraviolet light while in use, and the color will fade, but if you are considering purchasing these as Custom, please be aware of this.
Grease is also applied to the bolt that fixes the lever from the beginning, and the handlebar is fixed with a clamp system, and the screw is very precise, so it was installed comfortably.
The clamp that fixes the handlebar is a little hard plastic material, so there is a possibility that the entire clamp may rotate when it falls over. If you are concerned about it, you may want to change to RubberMaterial.
As for the feel of the operation, as per the Title, it is snappy and sharp.
If you want a direct feel from it, I think you can further modify the Sleeve in the Thailandico fixation area.
Even with the Sleeve position in its normal state, the OEMLever comparison is better, so I felt that the Point is a point of preference depending on how a person uses Clutch.
I wish I had not been stingy and purchased it earlier, as it is one of the other Items that can be fine-tuned for Lever position.
View detail
Used for RADIPON MASTER
I purchased this product to install a Guard made by another company.
The handlebar is very well made, and the handlebar is fixed with 4 screws, so even if it loosens a little, it is not likely to become defective immediately.
This time I installed it on a Fat bar and was able to install it without any problems.
I put it on as it says RightLeft on the product, but there seemed to be no difference in the shape.
I would like to see if it is sturdy enough, since I think this kind of thing plays a stronger role in resisting impact by rotating rather than guarding against falls.
View detail
It is not usable as it is.
I replaced my mc22 94 with this one because it wouldn't stop leaking.
The replacement itself was easy.
However, liquid is leaking from the Drain section.
I thought this might be the case, so I removed the drain bolt and found a seal washer on top of the black paint, as well as a groove on the bolt for a crimp. It was no wonder the bolt was leaking.
The paint was removed with sandpaper and the Bolt and Washer replaced with OEM.
The leak has stopped.
The product itself is solid. But it needs a little work.
View detail
To avoid breaking the Lever
I installed it to enjoy Motorcycle in various Situations in the future.
Installation, etc., is not a problem at all, as it is often seen in videos, etc.
However, if you need to open the throttle cone and want to process it nicely, you need to have tools.
I think it is easy to work with.
After installation, the motorcycle looks tighter and I am satisfied.
I don't want to feel the effects as much as possible, but it has become a talisman.
View detail
It became a little Fashion.
The purpose of the parts is to make the Indicator Lamp easier to see. Of course it has that effect, but I think there is a little change in aerodynamics.
I feel strong wind pressure when I reach about 100 km/h at high speed. After installing this Visor, I felt it was reduced a little.
I recommend it to anyone who wants to do a little something better.
View detail
It's expensive, but I have no regrets.
I bought the Protector looking for a Protector that could protect me to the flanks.
Leatt's Neck brace can also be quickly attached, so purchasing it together is a recommendation.
However, the shoulder protectors are fixed with elastic bands, so they may shift during running, and it may be better to wear them inside the Wear.
View detail
Fits: SUZUKI DR-Z400, SUZUKI DRZ400S, SUZUKI RMX250S, SUZUKI DRZ400SM 00-09
It is still in use after 2 years with little deterioration.
It was used in a Dirt-free environment.
Thanks to this, the Large size is usable without any deterioration.
However, the flexibility of the Material has been reduced in a certain way, so I repurchased it as Spare.
View detail
Normal for a Ratchet.
For some reason I didn't have a Ratchet in this shape, so I bought one.
Those who want to turn the machine in fine steps in a deft manner may find it a little lacking.
View detail
Expensive but good product.
I bought it for a place where I really want to fix Wiring.
It's Titanium, so it's expensive, but I'm satisfied.
View detail
Used with Babyface Change lever
The change lever of Babyface is divided into two parts, and the Flat Cap Boltm6 12mm is tightened by Screw lock+tightening the specified Torque.:2pc. We used a set to connect the two, but since it came off while driving, we thought it would be best to use a double nut stop, and since the reverse side of the lever would be tight with 12mm, we installed a longer 20mm and then fixed this product to the reverse side.
Nut texture is good and 4mm thin is the only one I know of.
If it were a little cheaper, it would help.
View detail
Only SNIPER has 115mm on the webike.
Purchased to adjust footpeg.
At 115mm, SNIPER was the only one that could be bought in a jiffy.
The texture is excellent.
View detail
Fits: KAWASAKI Z900RS cafe, KAWASAKI Z900RS, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR KRT EDITION
Vibration? It might be better.
[How is it used?
Touring use from mountain to city driving
Was the one you received as per Image?
Street Image
Was the installation difficult?
The work is easy. But I don't know which way to put the groove on the outside or which way to put it in!
How was your experience with it?
I feel fine vibration....like Large vibration to Small vibration?
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The OEM Screw is Black, and this Screw is Silver color, which is a bit cheap w
It's cheap, that's what it is.
View detail