Reviews
Lightweight bar ends from KIJIMA
Lightweight bar ends from KIJIMA, ideal to save some weight while still maintaining some vibration damping efects. Can be use on both the stock steel handlebars or aftermarket aluminium ones, as it cames with both adapters type and the Allen tool also. Overall a good quality/price product. View detail
No instruction manual included
There is no instruction manual. The collar and bolt are confusing, or rather, wrong. The "right side, left side" in the product description photo is "right side, left side" from front to back. The 150mm bolt and 68mm total collar are installed on the left side of the vehicle. The 115mm bolt and 33mm total bolt are on the right side of the vehicle. The tightening torque is 35 ft.lb. It was able to be installed properly on the American specification 451cc Eliminator. There is no instructions come with it. 150mm bolt and 68mm (55mm + 13mm) collar are for the left side. 115mm bolt and 33mm (20mm + 13mm) collar are for the right side. Tightening torque is 35 ft.lb. They fit Eliminator 450 and 500 too. Enjoy! View detail
Works like a skid plate should
Installation will require only 5mm bolt. Color match is wonderful for bike. Immediately took this to a local trail to test it out and managed to slam it on some rocks. Held up great, took a bit of damage but that's what it's for! Its tough but it's still plastic so I'm sure it has its limits.something to protect the finish on the frame and keep the mud off the motor.Little to no gaps, excellent coverage of major components.You will need to remove this skid plate when you change your oil.But if you are a little lazy about your oil changes, this may not be for you.This is the perfect solution and was reasonably priced. View detail
great seat cover
seat cover fit great and loops over each end of seat for easy installation. No matter how much stretching and how many staples I used, there's a couple wrinkles.The color looks good, but doesn't match OEM. It's a little darker.Lots of grip ! It took a couple days at the to get used to it. Night and day difference from stock.Use 6-8mm staples when you install or else it doesn't stick View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03
Quality good
Side mirror is good quality, matches the look of my bike. However require to order 2 unit. Each order is only 1 side mirror. Hence, i am required to order 1 more side mirror. View detail
A-tech single seat cowl&seat
Received my single seat cowl and seat today and I'm very impressed with the quality of the items,I've offered the cowl up the the bike and the paint is a good match, the only reason it's not getting 5 stars is the time between buying and receiving the item. View detail
Fits: SUZUKI GSX250R, HONDA CB1300SUPER FOUR, YAMAHA YZF-R25, SUZUKI GSX250R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR SP, HONDA CBR250RR ABS 2BK-MC51, HONDA CB650R, HONDA CBR650R, HONDA NC750X, HONDA CB1300SUPER BOLD'OR SP, SUZUKI GSX-R125, HONDA CB1000R, Others , SUZUKI GSX1300 HAYABUSA, YAMAHA MT-07, YAMAHA YZF-R3, KTM DUKE250, KTM 390 DUKE, KAWASAKI NINJA 250
Almost satisfied
Purchased mainly for day-touring.
It is also highly rated because it looks Refreshing and has a Single seat cowl-like appearance.
As for the capacity, I would like to put in a Wallet/Plastic bottle. (500ml) I am satisfied because the Fanny pack (which holds the Wallet) just fit.
I don't ride in the rain, and if I want to put rain gear in the bag, I use a Seat bag one size larger, so no problem.
One point of concern is the handle. The cover of the handle is a bit thick and heavy, so it sticks out from the Rear Sets in my vehicle.
I have to take the cover off to avoid this problem.
View detail
Stage 6 Mirror
Fast delivery within a week. Quality and appearance looks great. Easy installation. The only downside are is a zoom-in lens. With quite small lens. Zoom-in lens can be quite hard to look at. Hope you will consider the change to normal lens View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R SP
It's easy
Heat Guard installed, took me a while to figure it out because of the orientation of the Band. Please see the pictures. View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R SP
The contents are unknown, so I will Up.
I purchased the carbon heat guard because I needed it.
[Contents] but since it is unknown, I will provide a photo of it before installation.
1.Band Quantity:2pc. Set
2.Bracket Quantity:2pc. Set
3.Bolt Quantity:2pc. Set
4.RubberWasher 4 pcs.
5.Carbon heat guardBody
6.Instruction Manual for English Version
This band can be installed with the Exhaust System installed.
Therefore, the exhaust system will not be pulled out during the process of installing the Heat Guard.
The band is fully loosened and threaded through the bracket.
The rest of the time, Heat Guard is used with Bolt and RubberWasher.
Tighten.
CBR1000RR-R with Slip-on lineTruck di
So, I will install this product.
View detail
Throttle Cable tip processing was messy.
I was satisfied with the quality of the product, but the ball on the Throttle Cable attached to the Throttle was poorly machined on the Throttle mounting side, and it did not fit without modification. View detail
Fits: HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF1000L, HONDA CRF1100L
Not that I'm complaining.
I have not tried riding without the rubber, but I think it is a good solution if you remove the rubber. Also, the quality of the product is good, and compared to Chromoly products, the Material:I think it's also good that Parenthesis is made of aluminum, and as a footpeg, it's quite wide, so I felt it's good that my feet don't get tired easily. View detail
Only looks
Silver was selected to match the Swing Arm.
The Seat height is also the same as the OEM Product, so nothing has changed in terms of performance.
It is a product that only looks good.
View detail
High speed Wind protection
For high speed wind protection, not too large and good texture for OEM. View detail
![STD Series Chain 420D Steel [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/10626/420d_TS.jpg)
Fits: HONDA MONKEY 125, HONDA NSF100, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO, YAMAHA YZ65, KAWASAKI KLX110L, KAWASAKI Z125 PRO, HONDA APE100, HONDA APE100 TypeD, HONDA ATC70, HONDA BENLY90S, HONDA C50 SUPER CUB 50 Custom, HONDA C50 SUPER CUB 50 Standard, HONDA C50 SUPER CUB 50 DELUXE, HONDA C50 SUPER CUB 50 BUSINESS, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50L LITTLE CUB, HONDA C50LM LITTLE CUB
Necessary and sufficient performance
The price and performance are sufficient for the need. This is OK for city driving Level. View detail
![VXSeriesChain 530VX3 Silver [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/73326/0517_530VX3S&S_togo_TS.jpg)
Fits: HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100, HONDA CB1100 type II, HONDA CB1100, HONDA CRF1100L(Africa Twin), HONDA CBR1000RR SP, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000F, HONDA CBF1000, HONDA CBR1000F, HONDA CBR1000F, HONDA CB750K6, HONDA CB900 HORNET, HONDA CB900F (BOL D'OR), ROYAL ENFIELD BULLET 500EFI, ROYAL ENFIELD ContinentalGT
Best Balance Choice
If you consider the product as a consumable item without overdoing it, you will end up with the best balance. The Chain Cut & Crimp tool is also a beautiful choice. A bit of a geek's touch, isn't it? The silver color is a nice touch. View detail
Classic color and cool!
I installed it on my JA07SUPER CUB and it looks great with the classic color! And the Yellow Bulb is easy to see even in the rain! I like the durability and the fact that it doesn't break easily! I am very pleased with the durability of the bulb and the fact that it doesn't get damaged easily! View detail
It's the only way
It is a little expensive. But it is good that the Seat bag can be used as a backpack. off running, it is good to be able to carry on your back when you put in-car tools and other things that you don't want to get cracked. View detail
Size, boa back
I found out about the PantsType in early spring and wanted to buy it, but it was already sold out, so I searched for the Jacket as well and bought it right away. So, I have not worn it yet, but I think it is warm.
In winter, I wear a L size jacket (I have M and L size jackets for fall and winter), a thin fleece jacket, a flannel shirt or a wool-lined long T-shirt, and a winter compression wear.
Pants were running in Jeans with a boa lining and CompressionTights for winter, so I think the boa lining is warmer.
Also, the front is windproof, but I have Uniqlo windproof Jeans and Chino pants, but they didn't work so well on Motorcycle, so it might be different for Inner and Outer….
It's a bit large for my skinny body, and the length is a bit long, coming out of a M size jacket. Maybe that's why it's warmer.
View detail
![[Repair parts] Disc lock for stroger chain lock](https://img.webike-cdn.net/catalogue/images/116328/31255_TS.jpg)
Fits: KAWASAKI Ninja ZX-4R SE, SUZUKI V STROM 250SX
I'm glad I only get the key!
I bought this item because my neighbor ran over my Stronger Chain Lock with his Truck and only this item was damaged! I am glad that I can carry and use only this product for touring! This lock is "buy" It is! View detail