Reviews
Stylish
IKAZUCHIExhaust System and Quantity for CBR250RR:I attached it as a set, but it is better to prepare only the collar because a collar is needed between the bracket and the exhaust system. View detail
Can also be used with OEMExhaust System
The photo is in Black, but please keep in mind that the Lineup is only Silver at the time of posting the Impreza.
The only color available was Silver, and I wanted Black to match the Frame, so I made the following inquiry to OVER.
Q.Are there any plans to manufacture Black
→A. None.
Q.Is it possible to make a special order for Black?
→A. Acceptable at the time of remanufacturing after the current stock is paid out, but the timing is undecided due to the large current stock.
At the end of the exchange, I was referred to ReAnodized Treatment to Coken, which I used.
The cost at my time was 10,000 yen.
If you do not tandem and do not use a loading hook, you can lighten the weight somewhat by replacing the hook.
The OEM Exhaust System can be used, and of course the OVER Exhaust System can be used, but the OVER Swing Arm is a little thicker and the clearance is not so good, so we added an extra 4mm to the collar that comes with the OVER Exhaust System. The OVER Exhaust System can of course be used with the OVER Exhaust System.
The screw threads of the Bolt for fastening the Exhaust System with Bracket remain more than 1cm, so if you are concerned about it, you may procure just the right length yourself.
When fastening the Tandem Footpeg to the Frame, it is recommended to apply a medium-strength screw lock agent.
View detail
Sleek, Sharp & Cool Bracket
I was thinking of getting silver bracket initially, but changed my mind to black since i purchased a black racing hook. I am so happy i made the choice to change color. The black is really cool; its not shining & matte. really make my bike look more classy and sharp. the over racing logo is carved, meaning it will not fade! i used it with akrapovic exhaust & exhaust protector. View detail
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA250R
Race ish feeling Up!
Exhaust system is Trickster's Slip-on Silencer, but the bracket was originally installed at the NORMAL position, so it fits perfectly. View detail
Subtle…
I used it with SP Tadao's Exhaust System. For some reason, it went inside the Tandem Footpeg and interfered with the Swing Arm, so I used a 20mm Spacer to let it go outside. View detail
Tandem Footpeg removed and replaced
It was replaced together with Exhaust System replacement.
I am satisfied with the lighter weight than OEM Product.
View detail
To convert to Single Seat
Tandem footpeg is removed and installed for single seat conversion.
Black for a clean look around the Rear
View detail
It may be a little incompatible with YOSHIMURA's Exhaust System.
I purchased an Exhaust Bracket for my cbr250rr YOSHIMURAR11 CYCLONE. I bought an exhaust bracket for my cbr250rr yoshimurar11 cyclone. If the bracket that connects the Slip-on Silencer to the Exhaust Bracket can be slightly shaved, the quantity:2pc. I am very happy to have the Screw in one hole as it is not the Exhaust Bracket from YOSHIMURA. I have been using it for about a month now and so far it works fine. The design of the product is cool and very stylish on the tail side, and I think it has a great dress-up effect! The price is a little bit high, but it's a … View detail
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA250R
Wow that's cool
It's cool!
Recommendation!
By all means.
View detail
It's not just about looks…
I don't tandem, so I removed the tandem footpegs on both sides and installed this one.
The product itself is also cool, but without Step, the Rear has become Refreshing.
Plus, the weight savings will be there!
View detail
as pictured
The exhaust system area was cleaned up and the design is good enough to satisfy me. I would like to use it again as the shipping was fast after ordering. View detail
Refreshing around the back
I thought Tandem Footpeg was putting out the volume in the back, and I thought that SeatBack and If you are wearing Seat Cowl, I think it's worth buying it The ride is hard on the back end
I installed it on the Full Exhaust System made by SCORPION It is possible to install without any problem I can install it even if I don't want to, which is very helpful
View detail
good quality
Tandem Footpeg, since the CBR250RR's Tandem seat was made into a cowl I bought it because I was going to take it off too and make it Refreshing The strength seems to be fine I didn't notice it, but there is one dent in the surface horizontally If you look closely at the photo of the product, you can see a dent there as well, so I'm assuming it's from the manufacturing process It is View detail
Design is Parenthesis nice!
I use it in combination with TSR's Slip-on Silencer.
By saying that OVER's Bracket is compatible with Normal muffler,
Exhaust System side also supports Normal stepBracket so Bolt hole position etc etc. I thought that there was no problem but I purchased it, but it was in a condition that I needed some impossibility.
By pinching Bracket and Spacer,
I think that it is for people who can respond flexibly.
I think that it is better not to purchase with Pon attachment Image.
Fine adjustment of the angle of the exhaust system side, fine adjustment of the bracket side also in the moving range, etc. It is a feeling that the position of the hole gently agrees.
As the Exhaust Band of the TSR is fixed, a Type Exhaust System where the Exhaust Band position can be adjusted back and forth may be good.
In fact, OVER's Exhaust System also uses such Band.
Although the bending muscle at the time of manufacturing and processing by the distributor is contained, it does not matter if it is attached.
Also, it can not be helped Spec..
View detail