Reviews
The letters "YOSHIMURA" appear to stand out.
The Radiator is of course protective, but the YOSHIMURA letters stand out and are outstanding in terms of style! View detail
Fits: SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI RAIDER R150, SUZUKI GSX-R125, SUZUKI GSX-S125
Recommendation is to replace it together with other parts.
The black that is not pure black is austere and Parenthesis is good.
Since the installation was done with the Cowl removed, the Exhaust System was also replaced together.
Cowl removal was Large strange, so it would be better to do the other work of removing Cowl together.
View detail
Recommended for SV650 riders.
They have been helpful in protecting me from stepping stones while driving. View detail
I feel safe.
As expected of YOSHIMURA, it is expensive, but the quality is good enough.
RadiatorCore is easily deformed by a little Small stone or something, so I feel safer with it on.
When actually installed, the letters YOSHIMURA seem less conspicuous than I had imagined from the photo.
View detail
The dirt is very bad!
I removed the Core guard that had become so dirty that I replaced it to clean it. I was satisfied with the Large size. View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Looks Good
Good looking but expensive View detail
Pricey but good quality
[How is it used?
Fits ZX6R 2023. The fitment has not been updated, but it goes on normally.
Was the one you received as per Image?
It is thinner and lighter than I expected. The packaging was very careful and there were no scratches or distortions, just like a high brand.
Was the installation difficult?
It was more of a struggle than I expected. It was originally better to remove the cowl, but it looked like it could be attached without removing the cowl if I tried harder, so I removed and installed only the Under Cowl and LowerInner cowl.
Hook the three claws on the top of the Radiator to the edge of the Radiator and tighten them together with the Bolt that holds the Radiator in place.
Since ZX6R Radiator has a curved surface, we had to hook the nails while curving this product to some extent, but this was quite difficult.
The Horn and ABSUnit were fixed just above the Horn and ABSUnit, which were difficult to work with because they interfered with each other and the clawing was not visually confirmed, so we removed the Horn and ABSUnit.
Also, if this product is curved too much, Quantity:Pair (for Left and Right) The lower part of the "C" was floating and interfered with the cowl, so it was very difficult to control the amount of movement.
You also need to be careful not to crush Radiator's fins while working.
I think it would be better to have the fins installed at the time of delivery inspection if possible. It would be a total disaster if the fins were crushed due to the installation.
How was your experience with it?
It was difficult to install, but on the other hand, after installation, it is firmly fixed and does not make the so-called chatter sound while driving.
At first I thought the YOSHIMURA Logo might be too flashy, but I like it because it is less noticeable than I thought and can be seen if you look closely enough.
I was torn between Trickster's and other manufacturer's products, but I chose this product, which is Y-shaped and not Honeycomb-shaped, because the price was a little lower and I did not want to lose the cooling efficiency of the Radiator as much as possible.
[Included Parts:were they on?
A simple Instruction Manual and Sticker are included.
[Was there anything that disappointed you?
[Notes]
If possible, Cowl should be removed.
If the Hand Bent is set too high, the Quantity under the Radiator guard will be set too low.:Pair (for Left and Right) will float.
It is necessary to put a certain amount of effort into it, but be careful not to crush the fins.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200 01-08
Very good product!
This is a quintessential YOSHIMURA product. I am very satisfied with the texture and quality of the product. View detail
For cooling efficiency in summer
In order to improve the cooling efficiency in the summer, we introduced the Radiator Shelloud from Magical Racing to increase the synergy effect. I have been using the Radiator Shell Loud to improve the cooling efficiency in the summer time. Is it good with Radiator Chez Loud of Magical racing? The water temperature gauge never exceeded 110 degrees Celsius and I think the effect is almost as expected. I will have to wait a little longer for the protection, but it is a reliable YOSHIMURA product, so I think there will be no problem. View detail
Of cooling in the summer?
The water temperature gauge of FZ1Fazer exceeds 110-120 considerably in summer, so I introduced it hoping that it would be effective even a little. I am satisfied with the cooling efficiency of the Large. I have to wait a little more time to see the protection, but it is a YOSHIMURA product, so I guess there will be no problem. View detail
it fits my cb400
this product fits my cb 400 perfectly. fully replaced the stock radiator guard( which was plastic and have large holes) the new guard feels more secure View detail
Fits: SUZUKI GSX-R150, SUZUKI GSX-S150, SUZUKI RAIDER R150, SUZUKI GSX-R125, SUZUKI GSX-S125
I had a hard time installing it.
Since this is YOSHIMURA, there are no problems regarding installation accuracy.
Just install theQuantity:Pair (for Left and Right) The Cowl of the Bolt must be removed and the Rubber Bush of the Bolt stop must be removed.
If the Rubber Bush is hardened, etc., or if you have trouble removing it cleanly, you can use the Quantity:Pair (for Left and Right) Bush at the same time.
You may want to purchase it.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200 01-08
Wow that's cool
The quality is very good only for YOSHIMURA products.
It also looks cool.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA XSR900, YAMAHA Tracer900, YAMAHA Tracer900GT
Radiator Core Protector
The Radiator guard I was using corroded.
Replaced with Yoshimura's Radiator Core Protector Black Oki SIDE. It looks good, but it is easy to install, just hook the upper part and insert the lower part between Bracket and Bolt.
The Radiator guard I'm using is a Bolt, and it's tightened together with the Radiator, so I'm worried that it might fall off even more.
It stands out even in black, so it is a recommendation for those who like YOSHIMURA.
View detail
Fits: KAWASAKI Z250, KAWASAKI Ninja400, KAWASAKI Z400, KAWASAKI Ninja250
Easy to install. Reasonably covers up the radiator.
Need to remove at least one side of the fairing to get enough space to install it. The pattern is dense enough and provides enough coverage where it needs to without blocking airflow. View detail
Fits: SUZUKI GSX-R150, SUZUKI GSX-S150, SUZUKI RAIDER R150, SUZUKI GSX-R125, SUZUKI GSX-S125
Good to have it installed.
Installed on GSX-S125.
I found a part of the ligeator was crushed even though it was a new car and hadn't been driven 100?
I had it installed at a Motorcycle shop as it seemed to be a pain to install.
The YOSHIMURA logo is perfectly placed on the bike, giving it a very high quality feel and making the motorcycle look tighter.
It's good to know that Radiator won't go under.
It's been about 6 months now and it's beautiful without any sooting.
View detail
YOSHIMURA
I like the design and the texture. View detail
When it comes to SUZUKI, it is YOSHIMURA, isn't it?
I purchased and installed this product for the purpose of Guard for RadiatorCore.
Ha Drill says, it's quintessential YOSHIMURA.
It is quite pricey, but I have no complaints whatsoever about the texture or the accuracy of the production.
I like the fact that you can easily tell that it is made by Yoshimura.
There is nothing difficult to install, and it is only necessary to apply a medium level screw lock agent to the screw stopper after installation.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
appearance
Focus on looks! Easy to install too. View detail
Fits: SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI RAIDER R150, SUZUKI GSX-R125, SUZUKI GSX-S125
Invisible commitment and peace of mind
To be honest, I don't know how effective it is, but it gives me peace of mind. The best thing is that it looks great. View detail