Reviews
I like the blue lens and this shape.
We selected Napoleon OnMirror because there was no other mirror with a blue lens that was slightly parallel to it.
Quantity:Pair (for Left and Right) Two of these products must be purchased for installation in a
The installation was easy and quick with Bolt On, the position adjustment is wide, and the visibility is fine.
The vibration caused by the vibration is more difficult to see at high speeds than OEM products, but I think it is relatively better than other brand products.
I think it would be good if you don't want it to be Design-like and tactile.
View detail
Ninja1000 Cowl mirror→Best fit for Handle mirror conversion
[How is it used?
Used to replace OEMCowl mirror with Handle mirror
Was the one you received as per Image?
This is my second purchase of Right Side and I like the design.
How was your experience with it?
The first Mirror had lost its knob and I had no choice but to replace it, and the Repeat product also has a soft moving part that makes me a little uneasy.
[Points to note]
If the moving parts become loose, send them back to the manufacturer to have them adjusted.
How did it compare to other products?
I can't find anything else that I like, so this is my only choice.
[Opinions and requests to Manufacturer
Loosening of moving parts, please improve
View detail
easy to read
It was pretty easy to see. The only thing is the price lol. View detail
Tanax Shark mirrors.
I am very happy with my mirrors. The presentation in box was good. No damage during transit. The mirrors have a blue finish which is a nice touch. They were very easy to install. The vision is amazing too. View detail
I bought it because I thought it would be good for ImeChain. (Lol)
The Mirror section is Large size because it is a Japanese Vehicle Inspection Correspondence product.
So, rearward visibility is good and there is no blurring, etc.
It is good that it can be adjusted in detail, but on the other hand, is it difficult to align both of them?
Since it is a Yamaha car, the Opposite Thread Screw is Quantity.:Thank you for being Set! (^^^)
I think it is a little heavy because it is solidly made.
I am satisfied with the overall look and feel of the new Mirror, which is much tighter than the OEM Mirror.
View detail
Design is good but...
[How is it used?
I wanted to reduce headlight glare from following cars at night, and I didn't like the OEMMirror design that looked like insect antennae, so I changed to Handlebar Mounting's Mirror.
Was the one you received as per Image?
The shape of the mirror seems to have low aerodynamic drag, and the surface area of the mirror is large enough to be comparable to OEMMirror, which made a great first impression.
Was the installation difficult?
The installation itself was not difficult, but the alignment of the Mirror and Bracket was a challenge. Also, the Right Side interferes with the Accelerator cable, so I used a Tanax Adapter (product number:HM-10) and installed the Quantity:Pair (for Left and Right) Both were raised by 20mm and installed.
How was your experience with it?
I certainly like the look Design very much, but the rear visibility is not so good....
First of all, I could not see directly behind me at all, even though I tried various angles of Mirror and Bracket. Or, if you force it to an angle where you can see directly behind you, you can't see anything else and it is useless. Also, when changing lanes on a road with multiple driving lanes, such as an expressway, the area that I want to see the most when checking the back of the car is almost impossible to see due to the shape of Mirror. This is due to the design of the lower half of the outside of the Mirror, which is cut up.:Pair (for Left and Right) The mirror is clear up to about 30 meters behind, but beyond that distance, it is difficult to see, especially for low-slung sportscars and other vehicles. I often go touring on highways, and when I change lanes, there is a risk of being rear-ended by a low vehicle that is driving over the speed limit in the passing lane, so unfortunately, I have decided to stop using this Mirror and use the Cross 2 (Ray Save) We are planning to change to Mirror. Also, it has been about 3 months since I started using this Mirror. I have been using this Mirror for about 3 months now, and the Shock Through Joint is getting looser and looser, even though I don't move the Mirror Bracket frequently. At the moment, it has not loosened enough to move by itself due to vibration. I have given up on trying to fix this loosening because I cannot retighten the screws due to the structure. By the way, the glare from the headlight of the following car has certainly been reduced.
[Included Parts:were they on?
All the necessary parts for installation are included.
[Was there anything that disappointed you?
Rear visibility.Shock through Joint loose.
View detail
Easier to install than expected
OEM removal was more difficult than installation because of the hard screws. Installation is OK with the supplied hex.
I liked the shape of the Shark Mirror 3 better, but I didn't like the purple Mirror, so I bought this one.
I'm satisfied because it's easier to adjust the vision than OEM and it looks different.
View detail
If you're looking for a Mirror with a Normal mount, this might be it.
Initially I had a Bar end mirror, but it was fixed so tightly that there was no way to escape when I fell, and it caused damage around the Handlebar.
The Shark mirror is available in 1B, 3, and 4, but I chose the 1B because the purple mirror surface didn't seem to suit my color purposes, there were fewer moving parts due to the Bolt, and there was no ”NAPOLEON” prominently displayed on the Bracket.
Looks pretty neat and cool compared to OEM.
The mirror surface starts to blur and become difficult to see from about 6000 RPM, but it is completely safe and easy to see in city driving.
The only complaint I have is that the price could be a little lower considering the quality of the housing. and Quantity:Pair (for Left and Right) The only thing that is not common is the orientation of the
View detail
I'm generally satisfied with the clean look for a Mirror of this type.
The Bar end mirror was installed on our Z900, but the Mirror was broken because of the standing mockery, and the twisting of the Front fork occurred in that case, and the Bar end which is fixed firmly to the Handlebar and has no mechanism to release the shock was fixed to the Handlebar firmly and reached to that Damage. Isn't the effect of the mirror on the Large? and decided to revert back to Normal mount Mirror.
The OEM Mirror is a bit awkward though, so I was looking for a Refreshing Style and this is what I came across.
I didn't choose Shark Mirror 3 or 4 because the mirror surface is purple, the design of the Arm section is a bit noisy, and I didn't like the fact that the Arm section has Napole On's name on it.
The Bar end mirror is definitely better looking than the Bar end mirror, but I think this one has a very low level of ugliness in its appearance.
All necessary tools for installation are enclosed for easy installation.
What's a bit disappointing is the texture of the Body.
For the price, I would have preferred a little more texture.
I'm generally happy with it because it doesn't have a lot of shake when I'm running and it doesn't seem to move unexpectedly.
View detail
It's a visual like STREETFIGHTER!
I replaced it with a Yamaha MT-07 (2016) OEM Mirror.
With the complete set of installation tools, Opposite Thread Screw Adapter and Spacer, I had no trouble with the tools and was able to replace them safely.
The Mirror position is lower than the OEM product and it looks good.
I'm happy to replace it and bask in the self-satisfaction.
I did not know the color of the rear car reflected in the mirror because of Blue Mirror.
View detail
good
NORMAL MIRROR is broad and a bit uncomfortable to look at, and furthermore I replaced the Handlebar and I replaced it with this one It was easy to install and the accuracy was perfect It looks great View detail
good
NORMAL MIRROR is broad and a bit uncomfortable to look at, and furthermore I replaced the Handlebar and I replaced it with it It was easy to install and the system was perfect It looks much better than before View detail
High degree of freedom of installation
I used to use the same Mirror before, but it was damaged by a fall, so I bought it again
I used to use purple for the mirror part, but this one is blue The "B" at the end of the product name means blue
By the way, the purple one is out of print, resulting in a Both Sides exchange Tears
Visibility is better in blue There is no problem with the blur
The overall texture is matte black The same Mirror that I used before had a small rust and corrosion in about 2 years, so the durability is I'm hoping that things are getting a little better
The feature of this mirror is that it can be installed quite low In general Mirror, it is common for the shaft trajectory to go up and then to the horizontal direction, but this is not the case , this Mirror goes diagonally upwards from the base and low It can be installed on RefreshingSharp You can adjust the height of the Joint part which bends in the shape of a "ku" to a certain extent, so you may have to adjust it every time you want to It's easy to do without tools
The hardness of the ball joint of the Mirror itself is just right, so there is no problem of Gap while running None
I like the way they look and the way they look like slightly pointy ears LOL
View detail