Reviews
Fits: HONDA DIO110, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA ZOOMER X, HONDA ZOOMER, HONDA Lead EX
Highly Control
OEM comparison,
Braking power obviously changes.
Touch on Brake lever is surprisingly Mild.
Wear and tear is a little fast.
Aggressiveness of disc is normal. disc replaced at 60,000 km.
The Red Pad is almost identical to the OEM and ends up being about half as durable as the OEM, so the Golden Pad is better as a result.
Braking power should be the first priority because it is more problematic not to stop at a dangerous SCENE.
If you want to replace it at a store, you will have to pay a labor charge. If you buy a Red Pad, which has only about half the life span of a Golden Pad, because it is cheaper, the resulting two-time labor charge will be the same as for a Golden Pad.
In conclusion, Golden Pad has high braking power and good cost performance.
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155
Reliable Braking Power
[How is it used?
It is installed on a NMAX 155.
I bought a used car and replaced it with a Timing with a total mileage of over 10,000 km.
Since this is my first Pad replacement, I have not been able to compare it with other Other Brand Products.
How was your experience with it?
The Pad at the time of purchase of the vehicle is probably from Standard Equipment, but it is a more stable braking force than that.
It is very important to be able to stop safely as it is a commuter vehicle that we ride every day.
However, there is no sense that it is dangerous to stop too much, but only that it is safe to stop strongly, which is very good for Fee Rings.
The other part is how much Life is, but that will be discussed later, as it hasn't been that long since the replacement.
View detail
Fits: SUZUKI GSR750, SUZUKI DL650 V-STROM XT, KAWASAKI ER-4n, SUZUKI SFV650, SUZUKI SFV650, SUZUKI SV650 S, SUZUKI SV650 S, SUZUKI SV650, SUZUKI SV650, SUZUKI V-STROM1000, SUZUKI GRASS TRACKER BIG BOY, SUZUKI GRASS TRACKER, SUZUKI GLADIUS650400ABS, SUZUKI BANDIT250 V, SUZUKI BANDIT250, SUZUKI BANDIT250VZ, SUZUKI Volty typeT, SUZUKI Volty typeI, SUZUKI SV400, SUZUKI GSX750F
METAL but not Snap.
I always thought it was Casting Iron because SV650 has a magnet on the Left Front Brake disc rotor, but when I looked up the magnet on the CB1000R, a high-end motorcycle I recently bought, I found that there is a magnetic stainless steel version, which I think is the one used in commercial motorcycle rotors. I think the motorcycle rotors are made of it. It is said that about 70% of general stainless steel is SUS304, and the 300 series is the most rust-resistant stainless steel without magnetism. I could not see much change in the pad. But it should have a good life span. View detail
Fits: KAWASAKI ER-4n, SUZUKI SFV650, SUZUKI SFV650, SUZUKI GSR750, SUZUKI DL650 V-STROM XT, SUZUKI VANVAN200, SUZUKI DESPELADO800, SUZUKI DESPELADO800 X, SUZUKI DESPELADO400, SUZUKI DESPELADO400 X, SUZUKI GLADIUS650400ABS, SUZUKI Intruder Classic800, SUZUKI Intruder Classic400, SUZUKI XF650 FREEWIND, SUZUKI V-STROM1000, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650 S, SUZUKI SV650 S, SUZUKI SV400S
Stainless rotor
The OEM Brake Pads I have used so far were replaced after 25000km and DAYTONA Red Pad after 10,000km. The exception is for Race. The exception is for Race. View detail
Fits: YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA MT-07, YAMAHA FZ8, YAMAHA XSR700, YAMAHA TRACER9 GT, YAMAHA TMAX 530, YAMAHA FJR1300 A, YAMAHA FZ-1 FAZER, YAMAHA FJR1300, YAMAHA FJR1300 AS, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZR400RR-SP, YAMAHA FZ1-S, YAMAHA FZ1-N, YAMAHA FZ-6, YAMAHA MT-09 TRACER, YAMAHA MT-09 SP
It is very good as a substitute for genuine product.
I bought them because I wanted slightly better brake pads as a replacement for the original ones. As a result, it did not have better braking ability than the original. However, if you use it as a replacement for the original product at a low price, it will be an appropriate alternative and not inferior to the original product.About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Fits: HONDA APE50 TypeD, HONDA Monkey 125, HONDA hunter turnip, HONDA GROM, HONDA CT125, HONDA CBR125R
Beware of over-effectiveness
Repeater
Pad was also replaced along with the replacement of the Rotor.
I am amazed at how well it works between new products.
The difference from when we only changed the Pad is huge.
Chombre works well enough.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10RR, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR SP, KAWASAKI ZX-6R
Good all-around player and works well.
The SS Rear brake is intentionally designed to be ineffective, but it is so weak that it is difficult to Control when stopping at intersections, so it was replaced from OEM.
I am satisfied that the effect has improved to the point that I can feel the potency without locking it up.
I have used this product in other cars in the circuit, and all the factors such as durability, temperature dependence, potency, and cost are all balanced at a high level.
View detail
Fits: その他 , その他 , SUZUKI Inazuma 1200, HONDA CB400SF version S, DUCATI SS900S, DUCATI ST2, DUCATI ST3, DUCATI ST3S, DUCATI ST4, DUCATI ST4S, DUCATI 748, DUCATI STREETFIGHTER848, DUCATI 620SPORT, APRILIA RSV1000SP, APRILIA RSV1000, APRILIA RSV1000 R, APRILIA RS250, DUCATI 996S, DUCATI 996, DUCATI 916 SPS
Stable braking powerGolden Padχ.
I am not looking for an absolute increase in braking power, but since I use the RRBrake a lot, I feel that it heats up and wears out quickly. I've chosen Sintered padGoldenχ which is highly resistant to fading, and the control is not bad. View detail
Fits: HONDA APE50 TypeD, HONDA Monkey 125, HONDA hunter turnip, HONDA GROM, HONDA CT125, HONDA CBR125R
Made by stable DAYTONA
Installed on a Grom JC92.
Due to the ineffectiveness of the OEM, we took the plunge and skipped Red.
Gold.
I think the efficacy has improved.
Now I just need to verify how durable it is.
I think
View detail
Fits: HONDA APE50 TypeD, HONDA Monkey 125, HONDA hunter turnip, HONDA GROM, HONDA CT125, HONDA CBR125R
Grip interval is good
Grom (JC92) attached to the
OEMPad can still be used, though,
I replaced it because it didn't work very well.
FirstTouch is good.
I don't know about durability yet,
I wonder if it is worth the exchange.
View detail
Fits: SUZUKI Vexter 150., SUZUKI Vexter 125, SUZUKI Let's IIS, SUZUKI Street Magic II, SUZUKI street magic, SUZUKI Street Magic 110II, SUZUKI Street Magic 110, SUZUKI Avenis 150, SUZUKI Avenis 125, SUZUKI Address V50, SUZUKI address V125, SUZUKI Address V125 S Limited, SUZUKI Address V125 S Basic, SUZUKI Address V125 SS, SUZUKI Address V125 S, SUZUKI Address V100, SUZUKI Address V125 G, SUZUKI Address 110, SUZUKI Address 50, SUZUKI RM80LX
The most effective Brake Pads Race warrantee.
[How is it used?
Used for ADDRESSV125. from Street to Circuit.
The front tires should have a high grip to increase safety. (By the way, I wonder if the product Naming is a pun on Cigarette or the old cartoon GoldenBat, or whose intention it is lol)
Was the one you received as per Image?
The 200mm big rotor often needs OEM pad modification, and it is too effective and heavy, which increases the weight under the spring. Caliper is also famous for KX85, but there is no development of Golden Pad, so I will make an Impression separately. (DAYTONAHigh spec line) The mesh brake hose makes the brake work well by pressing the pad hard with a little grip force, and the golden pad and the high grip tire support the pad.
Was the installation difficult?
It is usually difficult and tedious. At first, everyone is a beginner. If you do it slowly and carefully, you can do it. If you can do it, you can do CaliperOH anyway.
How was your experience with it?
The Brake Pads work best, but to get the most performance out of them, you need to run the car for a while to warm up the Brake Pads! Brake Pads work well and stop immediately. Initial Braking (at the beginning of the run/cold) is normal in efficacy.
[Included Parts:were they on?
Pad-only product mix from the beginning.
[Was there anything that disappointed you?
initial braking (mechanism) (at the beginning of the run/cold) The "I" is normal and works well when it warms up, but I would like it to work a little better from the start.
Durability of Pad
It will last 7,000 km even when running very hard and using a lot of brake. The HYPER Syntad Pad will last 12,000 km with heavy brake use and 15,000 km with normal driving. The combination of HYPER Synthad pad, High spec lineMesh brake hose and OEM Caliper will be written in the Impression of High spec line.
[Brake maintenance must be carefully and absolutely checked one by one.
It is the most important safety component for life.
View detail
Fits: KAWASAKI Zephyr χ, KAWASAKI Zephyr χ, KAWASAKI Zephyr 400, KAWASAKI ZZR600, KAWASAKI ZZR400, KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX400, KAWASAKI ZRX400II
The efficacy is safe Level!
There was 3mm remaining at 30,000 km.
It works better than the normal product and I feel more secure, so I'm glad I replaced it.
View detail
Fits: HONDA CRF1100L Africa Twin Adventure Sports, HONDA X-ADV, HONDA CRF1000L Africa Twin, HONDA CRF1100L Africa Twin Adventure Sports ES, HONDA CB125R, HONDA CBR650R, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CB300R, HONDA CB150R, HONDA CB300R, HONDA CB150R
Compared to OEM Product
Used on CB125R JC91 model.
I don't think there is any difference in effectiveness between the OEM and the OEM. On rainy days, it works just as well as OEM. On a rainy day, the OEM does not work unless the brake is applied very early. I don't know about the durability yet, but the aggressiveness of the brake rotor needs to be checked.
View detail
Fits: KAWASAKI Z250, KAWASAKI Ninja250, SUZUKI BURGMAN400, TRIUMPH TIGER1050, YAMAHA TZ50, SUZUKI BURGMAN400, SUZUKI BURGMAN200, HONDA XR100Motard, HONDA NS50R, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI DR800S, KAWASAKI ELIMINATOR 125, KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z250SL, KAWASAKI Z250SL
Feeling of security
I put it on '13MODEL Front 。 I was under the impression that the OEMPad was unstoppable. I replaced it with this Pad and went out for a test drive and the moment I grabbed the Brake lever. Oh, no!" I felt that it was a good idea.
I could feel the direct feeling when I held it, and I could decelerate as I wanted, which gave me a sense of security. I don't know about circuits because I don't ride them.
I don't know about durability as I just installed it, so I gave it a 3 star rating.
Front brake hose:APPerformance, Rear brake hose & pad:KAWASAKIOEM Spec. of the
View detail
Fits: KAWASAKI GPX750R, KAWASAKI GPX400R, KAWASAKI GPX250R, KAWASAKI EX-4, SUZUKI GS400E, SUZUKI GSX1100G, SUZUKI GSX250S Katana, SUZUKI DR800S, SUZUKI ACROSS, KAWASAKI Zephyr 750RS, KAWASAKI barios, KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI Zephyr 400, KAWASAKI Zephyr 1100RS, KAWASAKI Eliminator 400, KAWASAKI Zephyr 1100, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI GPZ400R
Exchange at the same time as DISC exchange
Exchange at the same time as DISC exchange
I had no problems with Brake's performance as I had imagined.
View detail
Fits: KAWASAKI KL600R, SUZUKI RG50 gamma, SUZUKI WOLF50, SUZUKI NZ250, SUZUKI NZ250 S, SUZUKI GSX400E Katana, SUZUKI GSX400F, SUZUKI GSX250FX, SUZUKI GS125E Katana, KAWASAKI Varios II, SUZUKI GN125E, KAWASAKI supersherpa, KAWASAKI barios, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400 SE, KAWASAKI Estrella RS, KAWASAKI Estrella RS LIMITED EDITION, KAWASAKI Estrella., KAWASAKI ZZR250
Good performance and good parenthesis
It works well, it's controllable, and it's good. Also, the gold color gives it a custom feel and makes it a good parenthesis.
There are various types of Brake Pads, but the good ones are I can Control the effects along the way." feeling, and at the end of the day, it was It stops right there." Feel. It's nice to use, isn't it?
View detail
Fits: SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-S1000, KAWASAKI ZX-10R, DUCATI 1098 R, DUCATI 1098 S TRICOLORE, DUCATI 1098 S, DUCATI 1098, DUCATI 1198 R, DUCATI 1198 S, DUCATI 1198 SP, DUCATI 1198, DUCATI 848EVO, DUCATI DIAVEL CARBON FL, DUCATI DIAVEL CARBON, DUCATI DIAVEL DARK, DUCATI DIAVEL FL, DUCATI DIAVEL STRADA, DUCATI DIAVEL TITANIUM, DUCATI DIAVEL, DUCATI HYPERMOTARD 1100 EVO SP CORSE EDITION
I am Repeating.
We have been using these Brake Pads that we requested to replace the OEMs. View detail
Fits: その他 , その他 , SUZUKI Inazuma 1200, HONDA CB400SF version S, DUCATI SS900S, DUCATI ST2, DUCATI ST3, DUCATI ST3S, DUCATI ST4, DUCATI ST4S, DUCATI 748, DUCATI STREETFIGHTER848, DUCATI 620SPORT, APRILIA RSV1000SP, APRILIA RSV1000, APRILIA RSV1000 R, APRILIA RS250, DUCATI 996S, DUCATI 996, DUCATI 916 SPS
Pad not necessary for most people.
It works with considerable gusto from the initial grip.
The Fork sinks down from the beginning, so it will be difficult to ride on other than a sports type motorbike.
There is no need for a pad that works so well from the start, and it is not recommended for general use because it will change the movement of the Fork and alter the characteristics of the Motorcycle.
I think there are more people who run Circuit on SUPER SPORTS750 to Main and Demerit who use it outside of competitions such as Gymkhana.
I think this pad is popular because it's cheap and easy to understand how it works, but it's like cheap, flavorful food, like junk Hood, as an analogy, and it's tempting to jump on it, but it's really not a good thing.
View detail
Fits: HONDA ST1300 Pan European, HONDA ST1100A Pan-European, HONDA CBR1100XX Blackbird, KAWASAKI VULCAN S, HONDA Silver Wing 400, HONDA Foresight SE, KAWASAKI VULCAN S, HONDA Forza., HONDA foresight, HONDA silver wing, HONDA X11, HONDA gold wing, HONDA XL1000V Varadero, HONDA X11, HONDA VTX1800S, HONDA VTX1800R, HONDA VTX1800C, HONDA VTX1800, HONDA VFR800ABS, HONDA VFR
Safe, easy to use, and economical.
It was an OEMPad, with only about 1mm of Rear brake left.
I decided to go with DAYTONA's Golden Pad.
As expected, the brake is reliable. If you step on it hard enough, it will generate a certain amount of brake and is easy to control.
Now I would like to put it on the front.
View detail
Fits: SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-S1000, KAWASAKI ZX-10R, DUCATI 1098 R, DUCATI 1098 S TRICOLORE, DUCATI 1098 S, DUCATI 1098, DUCATI 1198 R, DUCATI 1198 S, DUCATI 1198 SP, DUCATI 1198, DUCATI 848EVO, DUCATI DIAVEL CARBON FL, DUCATI DIAVEL CARBON, DUCATI DIAVEL DARK, DUCATI DIAVEL FL, DUCATI DIAVEL STRADA, DUCATI DIAVEL TITANIUM, DUCATI DIAVEL, DUCATI HYPERMOTARD 1100 EVO SP CORSE EDITION
Front and Rear are now on the same pad.
What made you decide to buy?
I replaced them with brembo Super SportFloating Discs in July. I replaced the disc with a brembo Super SportFloating Disc in July and it is still in new condition. I would have preferred to replace it at the same time as the disc, but brembo:RadialMonoblock caliperKit The M4's Standard Equipment pad was not working as well as it should have, so it was decided to replace it with this one. Golden PadX is only available for One Side calipers.:Pair (for Left and Right) Vehicles with Caliper have Quantity:2 sets are required
[How was the installation?
If you only want to exchange Pads, you can use the Quantity:Pair (for Left and Right) The process took about 30 to 40 minutes to complete. In addition to pad replacement, the Caliper piston operation check, rubbing out, and cleaning of details were also included in this project, which was completed in about 1 hour and 30 minutes. As with the Rear pad, no pad chamfering was performed this time. (There are many theories about the beveling of the Pad; I've included the URL so you can take a look if you're interested.)
In case you are wondering, Brake is an important safety part. If you are not confident about replacing it, we recommend that you leave it to PRO.
How was your experience with it?
The MASTER is 19RCS and the lever ratio is 18, which seems to work proportionally as you grip the lever. The DISC diameter is also changed from the standard 310mm to 320mm.
This time the comparison is brembo:RadialMonoblock caliperKit This pad is a Standard Equipment pad for the M4.:The Golden PadX starts to work from the moment you grip the lever, and it decelerates the ZX-6R, which weighs 197kg, at once.
[Others]
Fix the caliper to the Caliper Mount Bolt with the specified torque of 35 N.m. Also, after the work is done, nudge the brake lever several times to return the Piston to its position, and confirm that the brake works. If the car is driven immediately after replacement, the brake lever will not work because the piston is not back in position.
[Reference Material
Should Brake Pads be beveled?
https://news.webike.net/parts-gears/252606/?amp=1
View detail