Reviews
ActiveSub-frame
It is so easy to bank that even a layman can understand it.
Timing to bank the Motorcycle itself allows it to fall over in a straightforward manner.
View detail
ActiveSub-frame
I'm glad I bought it...and I'm happy with it! It's cool! It looks a lot different (and better)! View detail
Focus on appearance
I installed it and honestly cannot tell how rigid it is. However, the Handlebar and Seat feel stiffer than before. Setting of front and rear suspension is necessary. Installation itself is easy. If you change the order of the instruction manual, you can do it without Jack-up, but Center Stand or Maintenance Stand is indispensable. I am not a fan of XJR, but I like XJR even more now. View detail
Active Subframes
Hello I saw that I bought a lot of parts from WeBike. I was using SSB engine guard It was a great defense But the downside was that it was too heavy It had to be light, securing rigidity That's why I chose this product I installed it and ran excitedly As expected, it's strong and light It's beautiful to look at Thank you. View detail
It works!
I bought and installed a rear suspension that can be adjusted for damping, but I wasn't satisfied with the results. (´-ω-) I was disappointed because it was an expensive purchase. However, when I put the Sub-frame on and ran the car, I found that it was very easy to use. "What? You're such a good worker?" I guess "Custom" means "Balance" is "Large", right?
Also, the vibration of the Engine, which had been bothering me since I switched to a Handlebar, is now Mild and my hands don't tingle anymore.
View detail
Do you think it's more important to look good?
For installation, support the Jack just below the Engine and remove it from the rear Bolt, followed by the front Quantity.:I worked on 2pcBoltOne Side at a time, and I think it can be done without any problem if you do simple maintenance of Motorcycle. The biggest concern was that the Bolt would not fit due to the slight engine gap when the Bolt was removed, but the Front side Bolt was a little tight, but with a Jack, it did fit after a little adjustment. I think it looks good, but what is the effect? View detail
Fits: HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300ST
Appearance over function.
I'm not sure about the rigidity since it was installed since the car was new, so I'm not sure about the rigidity. w
However, I think it looks a lot cooler around the Engine. It is a self-satisfying product for me.
View detail
Fits: HONDA CB1300SBSP, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SFSP
Black and even tighter
This time, I purchased and installed a black sub-frame, which tightened it up even more.
When installing the Slider, the Bolt was not long enough, so I purchased a 130mm long Bolt and was able to install it.
At first I thought about buying Silver, but I am really glad I bought Black.
View detail
Usage of Active and Sub-frame
I'm very happy with the Large as shown in the image, and I'm looking forward to going touring. View detail
Knee grip knee depending on footpeg position
Depending on the position of the footpeg, the knee will be hit during the knee grip.:It's set. Interference with BabyfaceEngine slider View detail
Fashion Purpose
I installed it for the purpose of fashion rather than stiffening. The look is very macho and parenthesis is good.
However, the Slider of Babyface was attached, but it was not possible to install it without cutting the Slider considerably.
View detail
Look and feel
I love the design and the shape. I chose silver as the color but it will be blurred if it is not polished carefully. View detail
Reliable quality
As befits a high-class product, the appearance, texture and installation accuracy were all excellent
The aluminum baffle finish is very beautiful
It was an expensive purchase, but I am very satisfied with it
View detail
Looks OK
The Drive side Engine MountRubber is periodically reduced, so it can be eliminated in any way possible I bought it in the hope that
I took it for a spin, and it doesn't feel like it's stiffened up at all (Lol) It's all about looks
View detail
3 problems arise
1. After installed this sub frames, my legs keep touching them under normal riding position. Makes me feel uncomfortable. 2. The engine heat passes to my legs through this sub frame. 3. The sub frame does not compatible with original kawasaki engine guard. View detail
Fits: HONDA CB1300SBSP, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SFSP
It's nice and tight
It's nice and tight in the same color
I don't know how it has changed in terms of performance or anything, but it looks noticeably better
If the price was a little lower, it would be better
View detail
Impression used.
The shake of the car body also feels stable.
Material : It is Aluminum, but the surface oxidation is fast, the hands etc.. If you leave it alone, White will be a trace.
It is also a product that needs care.
View detail
Although it wanted from before, it was high and was not able to take out a hand. It purchased at last and attached by itself. Although notes were performed supporting a rear stand and an engine block with a jack, since two spacer collars are conta
Although it wanted from before, it was high and was not able to take out a hand.
It purchased at last and attached by itself.
Although notes were performed supporting a rear stand and an engine block with a jack, since two spacer collars are contained on the way, if it does not take care about the stud bolt of a rear upper engine, it will be caught in it, and a bolt does not go into it.
Although it has equipped with the skid pad of an after moriwaki, since it hit delicately in my 08REVO, the washer of two sheets was made to blow below a front engine hanger bolt, and I have avoided.
The dress-up of the circumference of an engine up was completed now.
View detail