Reviews
It looks nice!
I got lost a couple of products but decided here!
Installation can be done according to the instruction manual!
This item used OEM License Lamp Type and LED License Plate Lamp Used Type There was a Type, I made it for the LED, but I was in a state that LEDWiring's contact is bad or not arrived.
View detail
To reduce weight
Bolt-on's Fender Eliminator Kit.
In addition to Body, Bracket Department - A set of Screws - Seal for filling the gap - Mono BlackInstruction Manual (Quantity : 1 Set of 4pcs. 7 pages) will be attached.
The position adjustment is performed in three stages in the longitudinal direction.
The Rear blinker and the License Plate Light part reuse OEM's things, but there is no need for Wiring processing as it only removes the Connector.
Kit for exclusive use for the body, the complete set of parts for the installation is complete ... ... Reflector is careful as OEM can not be diverted and is separate body! (* Buy separately or make your own - Let's divert it)
I was able to coexist with other company's Rear Carrier, so the same installation method Grab Baretc. Also attached together (You can fasten it together) It should.
In addition, OEM's Rear Fender Department (For entering Frame) Large It is heavy, so if you use this kit, you can reduce the lighter weight by removing it.
View detail
It takes time and effort but I am satisfied..
Anyway the instruction manual is hard to understand.
However, I felt it was fun because I can work while thinking.
Also I liked it because it looks refreshing.
Wiring's crimping etc etc. It is recommended because I think that I can go smoothly in the atmosphere except the atmosphere.
* Wiring Cover can be turned using OEM's Wiring.
View detail
In-vehicle tool mounting Screw - - - -
Considering mud splashes of rainy weather, I have not hesitated yet,
I decided to use rainy weather so I bought it.
Product accuracy is also Large and strange, everyone is listed, but installation takes about 30 minutes.
Although there is no statement in the manual, the on-board tool installation Screw is special.
One SIDETRF (Special Minus screw) With Slotted screwdriver
Tightening only, Removal is RemovableTwo things it seems to be removed.
Because there is no such tool, I removed it at ScrewZaurus.
I think that there is no problem if it is sandwiched and removed with Pliers etc..
It looks clear, rainy weather is Large strange.
View detail
Installation is Large strange.
The tail which extended with the baby is clear. Tail became a feeling that it jumped up and Parenthesis is good.
However, installation is as it is Large strange.
Since I had a Standard working time of 1 hour in Package, I started working from the evening, but I got a little time to remove BlinkerWiring and gave up due to expiration of sunset time. I brought it to the Motorcycle shop after all the following day.
I have been working there for about 2 hours and managed to finish it. There is also a description in the attached Instruction Manual, but there is a good place to work with two people. The attachment of the Mud Guard that blocks the hole of Wiring is also fine work, it can not be a handy Custom just to remove it with a pong.
When bringing it to a shop, it may be slightly bad if you include that wage.
View detail
LED not lit
I installed it and License Plate Light does not light, I know that I mail it to webike but leave it alone.
To inquire about Manufacturer
There is no contact now.
I should have bought another Manufacturer.
View detail
Steel is good
It is Steel who chose this product.
Compared with Fiber, it will not crack due to vibration.
Another is to be able to use Loading Hook by partially processing OEM's Fender.
I am also satisfied with Silhouette.
View detail
Fits: YAMAHA FZ-8 FAZER, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-8
It is very different SMART
attachment - accuracy
It is not a place that requires accuracy, so I do not feel a problem in particular.
Also regarding installation, it is very simple because it is different depending on the type of car, as well as Wiring is properly classified and explanation of the connection is also very easy to understand.
I just had a hard time removing Tail cowl w
I think that it is good to refer to the service manual, the blogs of the installed people at the time of installation.
quality - Texture
The finish of Anodized does not feel cheap well and I think that it is very kind with One - touch coupler etc.
Only one point, if you take the corner of the cutting plane, you will get injured etc. I think that it is few and good,
Well after tight fitting I do not touch it so much and I talk about gloves, but I was a little worried.
shape
It is very SMART and Sense is also good because the original was pretty awkward,
However, because the defense power of the muddy drops, it is necessary for the rainy day to prepare, but well, which Fender Eliminator is the same.
Feeling of use
I am very happy with Stylish,
As for Reflector, I thought it would be nice if it should be included at the beginning, but I think that it was good to purchase separately because there is shape preference.
Cost performance
Is not it quite good if you think that it is a thing corresponding to each model rather than Universal Product.
View detail
I can recommend it.
Material : Unlike products that are likely to crack due to vibration of FRP, the sense of security unique to the Gold genus.
Apart from Wiring it is appreciated that it can be installed without processing.
Because of the pretty big Loose hall related to the above, Washer is also big, but it was still better if it was Black like Body instead of Uniqlo plating.
View detail
Fits: YAMAHA FZ-8 FAZER, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-8
Image will be redesigned
Not limited to this product, Fender Eliminator Kit
Since FZ 8 needs to remove a set of Tail cowl at the time of replacement, work around Rear is Large strange.
It was the best if the shape was a little closer to Cowl,
Even with this shape it will be SMART about too much.
View detail
Standard product
Previously CBR 1000 RR (SC57) , Currently used at WR 250 R.
Reliable with making it robust.
The number of parts is somewhat larger.
View detail
Unexpected effect ...
Every time I used Rear stand, I was hitting Rear Fender, so I bought it for the purpose of improving maintainability.
As for the installation, the Instruction Manual was also solid, so there was no problem (working time 0. About 5 H)
There is an unexpected effect ... Because it was lighter than OEM or because the end part was lightened ... It is easy to walk around. Even if you get on, you can feel it well, I feel lighter than usual. It was a pleasant miscalculation.
I am also solid making and it was good..
View detail
It's pretty good!
It was cheaper than other Manufacturer, so I was a bit worried,
No problem at all.
Excellent in COSPA, easy to install if you do according to the instructions.
Together with the Slim Reflector, it's more Stylish!
View detail
Perfection of details is also perfect
I compared a lot, but purchase if it is Active if it does not matter.
License Plate Light's Coupler is also attached and it is perfect Bolt-on.
Because I'm on the old car alone. I was slightly lost for removal of Cowl, but I think the product is perfect.
View detail
My favorite car is cool !!
It took 2 hours, but I could install it even without me with knowledge! Instruction Manual is difficult to see, but it can do quite well if I do it on my own self ww
Kit I thought that a Tail lamp will come with when buying, but Lamps are not attached. However, in case of APE it can be attached by removing the OEM !!
Although I liked the commodity, I think that installation work is fun and it is highly recommended for those who like the feeling that they are fiddling with Motorcycle! I thought that it would be safe to install even those who do not understand for the first time.
View detail
Steady making
【What made you decide the purchase?】
YZF-R6USSpec. The Fender Eliminator Kit was diverted to YZF - R15, but the rigidity is low only by the bending board, the number trembles with Engine vibration.
Before dropping Number by fatigue destruction, I was looking for a substitute item to change it to a more solid object, but it reached this proven product.
【How was it actually used?】
The rigidity was high, and the things like Number and Blinker vibrating with Engine vibration ceased to achieve the best objective.
With mounting as it is, Number angle is too safe (It stands pretty)
However, with the angle, this time License Plate Light interferes with Tail lamp.
A considerable amount of processing occurred to make it the desired angle.
【Was it difficult to install? (Hard parts case)】
Because YZF-R6 is mounted on YZF-R15, the mounting hole Pitch is different from 4, all are reopened newly, but you can attach other parts.
Since I had Blinker out of the office, Blinker Bracket was rebuilt with Original,
As I was concerned about the angle as mentioned above, it took time to create a Bracket for License Plate Light movement and bending the Body with the current car.
【Please tell me the point of installation and hang (in the case of Hard parts)】
If it is YZF-R6, I think that it should be installed in accordance with the Instruction Manual without processing.
In case of diverting like me, it is necessary to firmly set the dimensions when reopening the hole.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Not subject to evaluation
[Is there anything I was disappointed about?]
The color of the License Plate Light is pretty BlueWhite in the photograph, but actually it is White which took yellow color.
This neighborhood is disappointing.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I would like you to make a special Kit for Minor for Vehicle!
【Have you compared items?】
nothing special
[Others]
Processing contents
- Open 4 holes for mounting the car body
- Put Spacer in the attachment part with the car body and tilt it by about 10 °
- Bending the Bracket of the License Plate Light mounting part by about 10 °
- Create a new V-shaped braided Bracket between License Plate Light and Bracket and process it so that License Plate Light is horizontal
- Create your own Blinker bracket for external Blinker installation.
- Matsubishi Bracket matted for rust prevention painted with black
After all, it took about 3 hours.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
After all the Fender Eliminator is good !!
I did not like the OEM's Rear Fender and I replaced my Motorcycle so far with Fender Eliminator. The work itself is simple, quality and price are satisfied. I recommend you !! View detail
I like Design
Although it is sold from various Manufacturers,
Design (My preference) When
I decided Active by price.
Because quality is good, you can install it without difficulty.
It can be done in about 15 minutes.
(Removal of Blinker was troublesome)
I made my own Reflector.
It is satisfying because the Rear around is clear.
After that when the road surface is Wet What kind of silk?
View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF
Product is generally satisfactory, but the installation procedure lacked explanation
Product quality - Shape etc. Is generally satisfactory, but the evaluation in the following points 4. It is 6.
? The explanation of the procedure to remove Tail cowl is too easy, I do not know where to remove Screw.
I would like the Main plate and License Plate Bracket to come together from the beginning.
? OEMReflector can not be used, so I want you to incorporate it into this kit.
? Adhesive is required for Rubber molds installation, but it is not included in Kit.
View detail
It suits
After all, the OEMRear Fender that passed through did not match and exchanged.
Rear is refreshing and I am very satisfied because it suits you.
Because it is Bolt-on, it is easy to replace, so it was the right answer by car type.
However, I am worried about the mud bouncing in the rainy weather, but it is good because it looks good.
View detail