Reviews
Fits: YAMAHA CYGNUS X, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125, YAMAHA CYGNUS X-SR, YAMAHA CYGNUS X-SR, HONDA glom
Hollow Axle Shaft
Compared to genuine products, you can feel that the material and painting are better. The installation method is the same, but the size of the nut is different, so check it before installation. View detail
Fits: YAMAHA CYGNUS X, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125, YAMAHA CYGNUS X-SR, YAMAHA CYGNUS X-SR, HONDA glom
Rigidity.
I felt the replacement, but I used it on a CT110 HUNTER CUB with SportsTire.
Probably because of the increased stiffness and the better Tire performance, it blurred the other way.
It is a fast time with Wadachi and Gap.
What is the weakness or badness of the suspension and manufacturing accuracy?
We had to OH a lot of things at about 2~3,000 km.
Front fork OH, Late Up, Bearing replacement, Rear suspension replacement, and after many test rides, the shaking has somehow decreased.
Sorry, but the quality of Bolt and others in the country of manufacture was terrible and cost us a lot of money for a vehicle that was supposed to be a cheap ride.
I think Axle Shaft is a good product, but CT125 was a pretty poor Motorcycle.
The vehicle setup is good, but the component accuracy and manufacturing precision are very low, and I think they sold a much cheaper Motorcycle at that price.
The accuracy of the system shows the harshness of the vehicle.
If you want to be safe, you can either drop the Speed dramatically, or give up and OH and reassemble a new car.
By the way, I cannot change my vehicle as it has cost me more Gold and hassle than I imagined.
As you get better, you will enjoy Corner, which is something you can't get with the Large type.
I have said many times that Corner is fun, it turns well.
It makes for an interesting vehicle.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA Monkey Baja, HONDA GORILLA, HONDA MONKEY
แกนล้อหน้า kitaco ต้องใส่ View detail
Fits: YAMAHA CYGNUS X, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125, YAMAHA CYGNUS X-SR, YAMAHA CYGNUS X-SR, HONDA glom
It works.
[How is it used?
At Circuit. for weight reduction under Spring.
Was the one you received as per Image?
Yes.
Was the installation difficult?
It is easy to remove the Tire and replace the Shaft.
How was your experience with it?
The moment I held it, I also felt that it was lighter than the OEM.
I think it will be effective for actual driving.
We have also installed other weight reduction parts in addition to the hollow axle shaft, so it cannot be said that the effect is solely due to the shaft.
[Included Parts:were they on?
Nut was attached.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Replace both Front and Rear
[How is it used?
Used at Circuit. To lighten the weight at the turnaround.
Was the one you received as per Image?
Yes
Was the installation difficult?
Just replace the NORMAL Shaft. just remove the Tire and you are good to go.
How was your experience with it?
I can't say that this is the effect with Single Body, because I replaced it at the same time as Chain and Sprocket.
It was noticeably lighter when running.
If you have Gold, KOOD might be a better choice?
[Included Parts:were they on?
Nut was attached.
[Was there anything that disappointed you?
The hollow hole was smaller than expected, but it may be unavoidable for strength.
Still, I think it is much lighter than OEM.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA CYGNUS X, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125, YAMAHA CYGNUS X-SR, YAMAHA CYGNUS X-SR, HONDA glom
Nice black.
It is good to be lighter than genuine products, but the reason why I bought it is because of the black color. Genuine axle shafts look too cheap in cast iron color. View detail
Fits: YAMAHA CYGNUS X, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125, YAMAHA CYGNUS X-SR, YAMAHA CYGNUS X-SR, HONDA glom
Black and tightened
I could not feel the effect, but it looks Black and luxurious.
The black color makes it look tighter and I am satisfied with it.
I think the accuracy is also good. Highly recommended!
View detail
Replacement from STD
Rear shaft replacement was easy, but Pivot shaft replacement was difficult. (=PωP) no
It was good until I used RearJack and CenterJack to pull out OEMShaft and plunged φ6 stainless round steel instead, but I tried to insert a new one, but this one doesn't go in…I hit it with Rubber hammer and shook it, but it doesn't go in&hellip hellip;
In the end, when I took off the rear wheel again and took off the rear stand, it went in.
View detail
Fits: YAMAHA CYGNUS X, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125, YAMAHA CYGNUS X-SR, YAMAHA CYGNUS X-SR, HONDA glom
Even amateurs are impressed by the changes
It is installed on Grom JC75.
I was skeptical about replacing it because of its reputation.
I was hesitant about the expensive one, but I felt enough change with KITACO.
The stability of Front is so easy to operate that even a layman can see it.
I'll Recommend replacing the Front alone!
The OEM's just rebar feeling that I took off … lol
View detail
Fits: YAMAHA CYGNUS X, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125, YAMAHA CYGNUS X-SR, YAMAHA CYGNUS X-SR, HONDA glom
Replace front and back together, Fashion starts at the feet!
The front has been replaced to match the rear, how does it work? That is my honest opinion.
I think it's getting better. (Lol)
I'm more than happy with the way it looks than it works.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA Monkey Baja, HONDA GORILLA, HONDA MONKEY
Diverted to TLR250RFront, second purchase
I bought it a few years ago to reduce the weight of the front end and used it on my TLR250R I had some concerns because of the weight of the car and the different impact on the bike, but it works fine The price is very reasonable for Chromoly steel View detail
Fits: YAMAHA CYGNUS X, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125, YAMAHA CYGNUS X-SR, YAMAHA CYGNUS X-SR, HONDA glom
Finally I could exchange it!
There was no stock until now, it was finally possible to exchange. However, since ProductNo of this time is different from ProductNo of this time, it is better to confirm with KITACO's Homepage when purchasing! Since Front's exchange does not have STAND, wind up it on the roof material with strong carport Expression Ratchet as Quantity : I used 2pc, lifted it up by handlebar and worked. As I changed the Rear axle shaft the day before, I pushed FrontShaft out by using Rear axle shaft, applied Grease to Hollow Axle Shaft, exchanged Rear axle shaft from the other side and replaced it. Since Gap is generated when a load is applied at the time of extrusion, if you hold the Tire with one hand and adjust it, you can switch to Smooth. As forcibly proceeding work when a load is applied, it leads to breakage of the mounting part and damage of Shaft, so please refer to the person who is referred to at your own risk. Exchange is easy if substitution Shaft is available. View detail
Finally I could exchange it
There was no stock until now, but we finally could replace it as we resell it. This time, Rear axle shaft - I swapped Swing Arm Pivot Shaft. Before replacing, purchase the M12 - Size Long shaft at the mass retailer, use the M12 Long shaft, extrude the OEMShaft while gently striking with the Plastic hammer and push the M12Shaft from the opposite, when exchanging the Hollow Axle Shaft accomplished. The work itself is not difficult, but if you do not carefully work it will damage the Screw part of Swingarm and Hollow Axle Shaft, so please work on your own responsibility when using alternative Shaft. This time I exchanged Rear Sets at the same time. View detail