Reviews
It is a little hard, but it will turn to the end.
Many people say they can't make it to the end? But, we are excited to give it a shot! If you hold it down firmly and turn it firmly, it will tighten tightly with a high-precision feel. View detail
Built to a budget, but still functional.
Nice looking product. As mentioned in the title it is built to a budget. It lacks a locking screw or provision for such. That said, it appears to be fully functional & did not leak when the engine was test run with it fitted. View detail
DATONA Radiator Cap.
Super Cool Daytona Radiator Cap, arrived with very fast delivery across the world, much better Color Match than the original. Easy to fit in just 2 minutes. No issues and looks great. View detail
Parenthesis bad
I usually use PLOT products, but a friend of mine bought one for his CB1300 and it didn't seem to work, so he gave it to me. I installed it, but I don't see any improvement in cooling effect. It is just an ordinary Radiator Cap. It looks so bad looking that I give it a 3 star rating. View detail
tight impression
I bought this one because it is less expensive than OEM Product.
Design is calm, so it is good for those who want such things.
View detail
I like the look of it!
I replaced it because the OEM deteriorated.
This is a good choice if you want to have a modest Design and a NORMAL look.
View detail
I was fascinated by the flat black
I was looking for an OEM Radiator cap that would last a lifetime and I was looking for an Other Brand Product with a slightly higher valve opening pressure.
The flat black finish gives it a high quality feel and the texture is perfect, I was able to install it on my NSR50 without any problems.
View detail
It works normally
It seems that there are many incompatible car models when I look at other impressions, but I can use it normally for NS50R. View detail
DAYTONA Radiator Cap
Brand: DAYTONA Commodity: DAYTONA Radiator Cap Use model: KAWASAKI Z1000 Delivery time: The time limit quickly took 20 days to reach the Chinese customs Use experience: DAYTONA Radiator Cap is very helpful to the engine, it can improve the extreme heat resistance of the engine.But you should pay attention to the time of ordering, sometimes it takes a long time to wait. View detail
Installed in TS200R
Can be poned as compatible Parts of OEM Product. View detail
Expected
The engine area of the Rebel is also blacked out, but I didn't like the polished radiator cap, so I replaced it with a black cap made by DAYTONA (lol).
The Radiator is mounted at an angle, so I jacked it up to make it as level as possible.
But it still leaks a little, so I refilled it with LLC and replaced it.
The Radiator area is now all black and tight.
Completely self-satisfied with the world (laughs)
View detail
Reasonable OEM Replace Product
I bought it because of the hassle of ordering OEM parts.
There are some reviews that are unsettling, such as not fitting and not closing properly.
It worked for the FZ-1.
The feel of the installation is a little different from the OEM, the last twist was a bit harder than the OEM, but I was able to install it firmly.
I drove about 500km after installing it, but there is no problem because I don't see any evidence or smell of Coolant leaking.
View detail
Many non-compliant cars, be careful about purchasing
ManufacturerHP
The CB1300SF negative pressure valve is higher than the OEM, so it cannot be used
but no other conformity information is available
As you can see in the image, it doesn't turn out to be in the same position as the OEM
I ended up buying the OEM again
Review
Car models that may be available
VTR1000F
AF58
HondaCR125R
Kawasaki ELIMINATOR 250V
HORNET 250
KLX250SR
The available Reviews above include
It's possible that you don't realize that you can't get around to the OEM position
Car models that are considered unavailable
VFR800F
GSX-R1000 k5 k6
SEA BASSGLADIUS650400
MUZSCORPION
ZX-9R
DT230 LANZA (DT230)
NS-1
View detail
usually
I replaced it because the OEM got ridiculous, but the size doesn't seem to be slightly wrong I tightened it down forcefully... it stopped overflowing from the Reserve tank and it's working So that's good View detail
no problem
I bought the for vehicle stuff from Homsen before and tried to divert it to BALIUS I chose carefully this time, because the shape was totally different and it didn't fit, but Homsen has a lot of things to offer There are so many different types that I lost track of the reason for this
The results are perfect; it fits the KLX It will probably fit the BALIUS that I let go No loose leaks and no gaps
Cap seems to be a standard, but the part numbers are different for each manufacturer, so it's hard to tell I have to look for the corresponding part number of the Plug I want the number to be unified at least
It's a bit more expensive than Homsen's, so I lowered one star, but Motorcycle Kingdom It's Made in Taiwan and I don't think it's a problem
View detail
Not available
What can be installed car models.
We could not use both of us.
It was useless shopping.
View detail
Frame and second protrusion interfere with NS - 1 and can not be tightened
As it can not be tightened as the overall review is not used as it can not keep the appearance as a Radiator cap.
If you install the Radiator itself on the Cap installation side, it will be possible to install it ....
View detail
great cap
the first thing i recognised is the build quality compared to stock cap very impressively crafted and when i started to cap it the radiator mouth i could feel the spring and its rubber seal their grippiness is of very much different. i could feel it may serve its purpose great just i hope it could last for a very long time.a happy purchase for me. View detail