Reviews
Defective parts
The washers on the Bolt and Nut to adjust the angle were cracked and the Blinker was wobbly. I thought about returning and exchanging it, but it was too much trouble, so I used a washer I had on hand. I wish they would have a better quality control system. View detail
Refreshing
I purchased this kit at the same time as the Fender Eliminator Kit. Since the Rear Fender needs to be removed for installation, I decided to install it at this time.
I am Large satisfied because the Rear area is Refreshing.
It is better to have Tape because the wires will not be buried unless a little insulation Tape is wrapped around them when they are installed.
View detail
Before installation
I decided to purchase the product after seeing examples of installation on social networking sites.
As for SR, I was thinking of owning/using it in NORMAL, but I still want to customize it.
We are considering installing SWCondor Handle, so I think Small blinker is a must.
In terms of products, we have a lot of experience in installation, so I don't think there will be any problem at all.
View detail
Highly Universal
I bought it for SR, but I don't use it anymore, so I put it on my CUB (lol).
Bracket and wiring are included, so it can be attached to other than SR.
good point
Made by DAYTONA.
Bracket and wiring included.
The aluminum buffing on the blinker body is beautiful.
The construction is solid, so it is difficult for the bulb to break.
There are no bad points.
It looks good and is compliant with safety standards.
It can be used outside of SR, so it is worth a try if you are not sure about Blinker.
View detail
Separate handle
Separate handle needed to be replaced.
OEM is very Large and I was glad to be able to change it while I was there because I felt uncomfortable when I started to worry about it.
It is made by stable DAYTONA.
View detail
Looking good
Something changed with this small turn singnal light. If you want you sr400 caferace style you need to buy it very first. I strongly recommend. View detail
Blinker replacement
I can make a Blinker that juts out as far as Devilman as Mazinger Z. View detail
rust
Nut was rusty a while after a rain run. It is terrible. I'm satisfied except for the fact that I'm satisfied, but in the future I want to buy Daytona's products by looking at the in-play etc. carefully. View detail
I like the look of it
Since the SR400 19-year old is insisting on BlinkerLarge too much, Small I replaced it with a blinker
Also, because the Bracket has moved the blinker position, it looks Refreshing and parenthesis better with a tighter feeling
After I replaced it, I noticed that the blinker position has been lowered and the blinker lights are I can see it clearly
It also helps you to forget to erase Blinker
View detail
I'm happy to be SMART!
The STD Blinker was too assertive, so I replaced it
After installation, it became a Compact and the blinker position was put together in a nice way
It balances better with the Light and gives it a SMART look
Also, the Front Blinker is now visible at eye level, so it's easier to see, including when you forget to turn it off I did
It's an expensive product for Blinker
I hope it's durable, but I don't know as I just started using it
View detail
Overall construction is good Except for one part
The finish of each part, including the body part of the Gold genus, is beautiful, and the amount of light, contrary to the small appearance, is also Good visibility
Installation is not difficult if you follow the Construction Manual
So where is the problem?
The one I bought was 1pc. out of 4. defective
As for the contents, the body part was not able to fix the black parts firmly, and the black parts were not able to be fixed The idea is that
As shown in the attached photo, using Bolt and Nut, the structure is designed to tighten the Black parts, but the..
This Nut does not turn to tighten or loosen, and the Manufacturer is required to inspect the where one got it "Defective I have received a decision to do so
I checked the other three Nut to be sure, and they went around, but there's some resistance Or rather, it doesn't go around to Smooth This is the only part that seemed low quality
Later, the Manufacturer sent me a replacement, so I checked it out. But I don't know why the same symptoms are there again Are they really checking before shipping? That's how I feel right now
Currently requesting a re-inspection
Maybe my luck just happens to be catastrophically bad, but here's an FYI
View detail
I'm using it with no problems
I installed it on my SR400fi. front is no problem with the included Bracket and the rear is It is installed in the relocated bracket of Shim's Craft's Blinker
I was worried about visibility because it is quite small compared to SR's OEM Blinker But it seems to be fine because it shines brighter than I expected
Because the attached Wiring Tube seemed to deteriorate soon, I replaced it with Spiral Tube I use it
Because the Rear was relocated near with Tail Lamp, there was not enough wiring style, so it was necessary to add it Installed
View detail
Beautiful units from Datona - transform the look of your bike!
Love these Daytona indicators (part number 95827). The OEM units on the SR400 stick out rediculously far on what is a sleek and narrow bike. These come with everything you need to install, which took an hour. They are sturdy and well built and you can tell that not even the racous vibrations of a 400cc single with bother these in the slightest! Was hard to decide whether to go for black or silver but I think the brushed finish on these indicators is the best of both worlds. View detail
Small is bright but also texture is high
It installed in SR 400. F. R was easy to install. The texture of Aluminum Body is high and there is a high class feeling. It was a brightness that I could imagine while working on a Small Body.
I think that it is a reliable Brand.
View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel300, HONDA Rebel300
Individually!
CRF 250, Blinker disliking Design for the same Cost reduction as the CB system, became dramatically individualized instead of this Small blinker. The fact that the function of the Front's constant lighting was impaired and the fact that the installation of the Rear blinker was a bit Large strange,. View detail