Reviews
I think it's expensive
We-Big's information is wrong, and the first Material that I purchased:Aluminum's slightly nicer Fender Eliminator turned out to be impossible to install After much consideration, I decided on this one It is made of iron, it is heavy and I am worried about the rust However, this Kit is really the size of the Smallest necessary, and the Bolt is a two-point stopper (The OEM stops at 4 Bolts) I'm not going to get the properly vacant Bolt holes or the subtle gap between the Frame and Seat Cowl It is kind to have Sponge Tape to fill in, and the description in Manual is also kind and clear It was easy
When I installed it, it disappeared almost to the point where I couldn't recognize the Fender, and I could not see the tail lamp It looks like the Number is directly below the The same Active's Trapezoidal Reflector is also my favorite You can also install Blinker, but if you want to take advantage of this Compact feeling, please do so! I'd like to replace it with a Small Dice LED Blinker I went with the Hurricane Blinker
Small and disproportionately large Rear Fender and Blinker are not the only ones who can be used I think it's very neat to see the grommeted rear area that comes with it I highly recommend the License Plate Light to anyone who is feeling the same frustration! The white color LEDs are working perfectly fine, too
View detail
I think it's very good
I was hesitant to introduce the OEM Loading Hook when I heard it was going away, but the OEM's Loading Hook I heard that the Loading Hook part could be cut out and sandwiched and attached The screw when removing the blinker from the OEMRear Fender was sticking and Because the screw doesn't turn because the driver I have is a little too long, I want to use a Rear Fender Cut the Blinker off steadily with the Nipper and remove the Loading Hook section Cut it with a sander and then clean it up with a Cutter Knife, or if you work slowly, 3 It took me about an hour The screws are not long enough, so you need 7 M6 25mm countersunk screws The hole of the introduction was sealed with Butyl for waterproofing Refreshing and cool and satisfying View detail
I'm happy with the look and feel of this product
Ninja650 (2020) I bought the MODEL and I installed it the other day
The recent motorcycles are short-tailed and the Fender looks large and uncomfortable I had to install it because there was
I'm satisfied with the Large change in the fact that it is compatible with vehicle inspection
It looks great and I'm looking forward to touring
You only need to install the parts that come in the package and no processing is required, so even a beginner can install it I think it can be installed
When removing the OEM Product, it is a little difficult to remove the screws, etc. because they are stuck It is
(It took roughly 2H.)
View detail
Highly textured License Plate Light
I was all about the DAYTONA for my old ZZr1400, but I've just switched to the ZX14R I changed it to this one, per the
The texture of License Plate Light is good, but it still needs to be wired But then..
Can't you make a dedicated Connector for the exclusive design of each car model..
View detail
That's Active!
Very good value for money and the product system is extremely high!
It's a nice touch to be able to tuck in your in-vehicle tools and the position of the Blinker
View detail
Cool
I chose it because it's solidly made and is my number one Refreshing style
The instructions are careful and easy to install
But the price is just too high, and if you're going to spend 20,000, you need to put the keyhole cover on from the start, not an OEM port I wanted it
View detail
Japanese Vehicle Inspection CorrespondenceFender Eliminator
Speaking of SS, I thought of the Fender Eliminator, and I thought of the Japanese Vehicle Select this one, Inspection Correspondence
Parenthesis good for the butt Refreshing
Removing the Blinker was the hardest part of the process
View detail
Rear is now cool
I wanted to Refreshing the Rear, and the Active Fender, which is highly rated by others Eliminator Kit installed!
The OEM made it look a little heavy, but this makes it look lighter for Large
I'm a little disappointed that I have to buy a separate Reflector for the Rear!
View detail
Refreshing the Rear Area
Recent vehicles have Rear Sets Smaller, shorter It's been done
This gives you a Rear Fender that looks like it has a tail
More vehicles are coming in
Considering the rainy ride, it's the only way to avoid mud splashes
I think it's the shape, but I can't help but think that BodyDesign's Balance..
I want to prioritize function, but I also want to match the balance
So I bought the Fender Eliminator Kit!
I installed the FRP Fender Eliminator Kit on a CB before
I've experienced a problem with the clamping surface cracking due to vibration
Buy a Fender Eliminator made of Gold (Aluminum)
Remove the 4 bolts at the bottom of the Rear Sets, Blinker and License Plate
It is a simple structure to replace the
It's not difficult to install
Since this is a part with a lot of vibration, it's better to install it with a screw retainer
I think it's good
My impressions after installation
The Number suddenly pops out of the bottom of the Rear Sets compared to other products
Number attaches to it via some kind of bracket, not structure
I thought that was a good area to match the Mechanical SV-X
It's the right length, so there is no shaking caused by vibration
There is little chance of missing Bolt
There are not so many loading hooks on this car, but the square hole in the bracket is not enough
With the side effect of being able to use it for loading!
View detail
A little more
The installation instruction manual is written in both APE 50 and 100 It's hard to understand
Also, it would be helpful if you could describe the tail lamp OEM removal and installation in more detail
I would like the Base plate to be a little longer when installed I am worried about the gap
View detail
Refreshing the Tail area, Stylish!
I bought it to make the Tail and Rear area refreshed
The installation instruction manual is carefully written and easy to install Wiring of LED License Plate Lamp (Red, Black Quantity:2pc) is exposed and looks bad (No problems with performance.) So I put it together through a Gel Coated Tube
Japanese Vehicle Inspection Correspondence You will need a Reflector kit (sold separately)
View detail
Fits: KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2SX SE
The Pannier case will be scratched up
I don't think of attaching the Pannier case to this product at all, because the Pannier case and Blinker hits the gut! So the Pannier case is now covered in scratches
I took a 1.5 cm collar and shifted it backwards to make a hole in the License Plate Light with Drill and put Number on it
I managed to install the License Plate Light with a bracket, but I was able to do it hELLIP;
It took a lot of work to get it into shape here
Active, why didn't you consider the Pannier case ( ; ;)
View detail
Overall, I'm happy! It's just that the license light is on …
The license light in the product photo is cool and bright with a nice line of LEDs However, the actual product has a white plastic cover on top of the LED, so it's a little bit of a problem It was different from the Image
I'm sorry
However, I think it's good as a whole because it works well as a license light It is
View detail
It's very good because it's pontooned
I think it's great because you can basically pimp it out
There is only one point that the Blinker's Coupler does not fit and I had to cut a hole in Large So I decided to install it in 4
View detail
ACTIVE Fender very good~!!
Compared to other brands of Fanda Kit, I ordered the active one, and the delivery is really fast, and the sense of unity and completion seems to be good. However, because it is for Japanese license plates, you have to drill plastic with a drill to install Korean license plates, please be aware!! The delivery was fast and the packaging came safely and well. Webike is good!! Fendakit I have ordered an alternative to compare with other brands, but the delivery is really fast, I feel unity and perfection. I do not even like the motorcycle vibration and hold it by hand. It is also nice to shake to shake. However, for the Japanese license plate, you should drill the plastic with a drill when you install the license plate Know your show !! Delivery is fast and packaging is safe. translated by Google Translator View detail
I'm not sure about the waterproof treatment
I'll just write my complaints
Everything else is perfect
I'm not too familiar with the License Plate Light's Waterproof treatment I am anxious
If you pour water on the back of the Number, it's going to get inside normally
Large You need to be careful when raining and washing your car
It would be better to treat it separately with water stopping clay or Pate
View detail
I'm better dressed now
It looks good, but when you put it on R1 (09~14MODEL), the rainwater jumps up your back & hELLIP;
I bought it with that in mind, though, and I deserved it
View detail
It will look nicer and cooler, but
It will be neat and cool, but since the Fender will be gone, I thought it would be more difficult to wind up in the rain than I imagined I think
It bounces around and gets surprisingly dirty on things like Tandem seats, but it's not as good as it looks (and I think
View detail
No complaints
It's the best fit
It's just too expensive It would be more affordable if it were cheaper
The rear area is clean and looks beautiful
Design for everyone
View detail
Japanese Vehicle Inspection Correspondence
Japanese Vehicle Inspection Correspondence I was troubled with the Trickster's product, but the shape of the TYPE-3 Slim reflector I chose the Active one because it was so cool
I don't know because I had a mechanic do the installation
I don't like the angle of the Number to sleep either, so this product doesn't sleep that far and back I also like the fact that it is clearly visible from the
Overall Refreshingly cohesive and a bit pricey, but I think the price is a bit high for the 6R Japanese Vehicle Inspection When it comes to choosing the CorrespondenceFender Eliminator, the Active I'm glad it's from the company
View detail