Reviews
I can't think of anything else.
This Cable Louver and Bell Hammer will make you happy!
Lubrication of the wire cable is completed in one stroke.
Clutchetc. operation system, even if you don't ride Off, the lighter the better, of course.
It is pricey, but well worth the purchase.
View detail
Use it and you'll be convinced!
I gave high marks to Costa, but at first I thought it was expensive!
But if you use it, you will be convinced and impressed, that's all!
No more frustration with Injector!
I definitely want you to use it!
View detail
It's easier to work with, but...
Found from WeBig's imprint.
I wanted to see it used myself and bought it lol.
I used it right away.
Certainly, the grease leaks less than the one I used to use. However, the grease spray inlet is too small to fit the grease spray that I have, and it leaked from there.
I wonder if it would be easier to use if I could devise a little more.
View detail
The Wire lube injector lives up to its reputation.
[How is it used?
Used for refueling Wire
Was the one you received as per Image?
Yes
How was your experience with it?
The lubricant reached the tip of Wire better than I had imagined.
[Points to note]
Note the direction of the wire's leak-proof rubber.
How did it compare to other products?
The unit price is high! But after using it, I am convinced. I don't think I will ever use Injector again!
Other items that would be helpful
Opinions and requests to Manufacturer I would like to see the rubber parts issued as Repair Parts, as their lifespan is unknown.
View detail
Best, but not omnipotent.
I became interested in it through a feature article on webike and bought it.
It is significantly better than the common Aluminum Injector, but not completely problem-free.
First of all, it takes time to put it on. The Packing is put through the Cable and the Body is tightened, but the amount of tightening is large and must be turned many times.
When the body is full, the remaining oil leaks out from the slide portion when the body is removed, so curing and dustcloth preparation are essential.
Naturally, it cannot be used with the Cable with Throttle's Guide (the same applies to the conventional product).
I am concerned about the durability of the spiral Cut Packing as it is a special shape and not sold individually.
However, there is nothing better than this in terms of oil feed capacity, and since pressure can be applied at the slide, even hardened old oil can be pushed out at once.
View detail
Thank God!
I used to use a Wire injector of the type often sold at supply stores, but I couldn't get it to refuel properly, so I bought this one.
I was a little bit worried about the wire injector, but it turned out to be the right decision.
I used Bell Hammer for the Oil and was pleased with how well it penetrated from entrance to exit.
View detail
You can throw away all the other W's except this one.
[How is it used?
The number of large motor cycles with cable-type clutches has increased to two, and although we had a conventional wire injector, it was no longer useful and was left unattended.
I was thinking it was time to clean and lubricate Cable and then I saw the Webike introduction article.
I thought, "This is it! I thought, "This is it! It took more than a month for delivery, but I finally received it the other day and tried to use it right away.
Was the one you received as per Image?
It was bigger than I expected. w The length is about as long as a box of Cigarette.
It seems to be a California-based manufacturer, and although it was manufactured in China, I think the quality is not bad.
How was your experience with it?
Compared to the conventional type of wire injector, Quantity:It takes time and effort to Set.
The procedure is
Turn the body and separate it into two pieces→Pass the Cable through→Attach the black rubber part by wrapping it around the Cable→Screw the separated Body→Lubricate it
I had to shave the tip of the tube to make it thinner, but it is better than too thick because it can cause leakage.
Quantity:Set is time-consuming, but it is possible to properly set theQuantity:If you set the wire injector, it will not leak all over the place and not enter the Cable at all, as is the case with conventional wire injectors.
Every drop of the blow is injected into the Cable and blown out from the other side, which is Large strange and pleasant.
Stress-free.
[Points to note]
Quantity of Rubber parts inside:If the set-up is not properly done, it will leak. Since the structure is sealed at three points including the O-ring and other rubber parts, it will leak if it hardens over time.
There is some concern about durability in that area.
How did it compare to other products?
It is incomparable to conventional wire injectors in terms of leak-free and reliable lubrication.
Exactly Throw away everything but this." W
It is expensive, so it depends on how long you can use it, but I think you will be happier buying this rather than getting frustrated with Gold for a tool you can't use.
View detail
Better than ever!
[How is it used?
I used it to make the clutch a little lighter and to prevent the wire from rusting, since the clutch yawer was replaced.
Was the one you received as per Image?
I'm using it for the first time. YouTube." I tried it after watching the video at
How was your experience with it?
Installation was easy and lubrication came out the other side of the Wire with no leaks.
[Points to note]
Be careful of the direction of the rubber packing that fits into the wire, and press the top part at the end to drain out any remaining lubricant inside.
It is
How did it compare to other products?
The Injector I used to use leaked lubricant from the entrance even when the screw was tightened, and only about half of the lubricant flowed out.
It was like they were not coming.
I don't think I will ever use the old Injector again.
View detail
It's the only way
I had another wire injector, but when I used it, the oil leaked out and it was no good at all. This one, however, did not leak any oil and did exactly what it was supposed to do. The price may be high, but this is the only way to go. View detail
The best, but maybe not all-purpose.
Rumored Cable injector guy.
It is actually well thought out and much easier to use than the traditional Injector.
However, the size of the Cable's length adjustment nut is too large because it is made to enhance sealing. (about M8) In some cases, such as in the case of a Cable, the Injector may not be able to bite into the Cable's sheathing thanks to that section.
Also, sticking Wire× I could not penetrate the Grease with Wire grease with high viscosity.
Anyway, it seemed to work well with low viscosity GreaseorOil, and it is a much better tool than the existing Injector.
View detail
You can throw away everything but this.
The price seems high, but I have been using Quantity:I was using that hard-to-use example guy for about 5pcs.
I threw them all out a few years ago, but for some reason I bought them on Astro this past February, and when I used them, … yahari… they're so hard to use!
If the fixture is a Quantity:2pc. I bought the one with the Set and was expecting a little more, but…
I have purchased and used this one and my impression is as others have stated in the Title. [You can throw away everything but this. is one of the choices! is
I just purchased it from Astro and would like to give it to a friend. w
View detail
You can throw away everything but this.
[How is it used?
of those already using it. Throw away everything but this." The first time I bought the product was when I saw an impression of the product.
It took a lot of courage to invest nearly 5,000 yen in a wire injector, but I was dissatisfied with all the wire injectors I had used so far (*such → https://www.webike.net/sd/2073358/), so I decided to take the plunge and buy one. I was not satisfied with all the wire injectors I have used so far, so I decided to take the plunge and buy one.
In case you are wondering how many times the general wire injector has been replaced (tightening Dial is Quantity:2pc. I have a Set! (and as a result of buying more every time there was a change), so I have 3 or 4, but I don't use them at all.
Classic "Put engine oil in a Vinyl bag and hang it up. This is because you can't hit a Tai KATANA on the method.
Was the one you received as per Image?
As per Image
Translation (Instruction Manual for enter here is included and easy to understand.
How was your experience with it?
Perfection！！！
The oil was perfectly lubricated, with no spurts of oil from the gaps.
What's more! We want to carry out the process of flushing out the dirt inside before lubricating, but until now, the only way to do this was to completely remove the Wire and put it in and out of the kerosene container by hand...etc.
However, with this product, after Parts Cleaner is sprayed, it can be quickly pressed down for cleaning at a great speed.
Gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo!
[Points to note]
The inside rubber packing is oriented.
You will not make a mistake because it is written in the Instruction Manual, but if you lose the Instruction Manual (and you probably will), take a close look at the shape of the Case and Packing to make sure you do not make a mistake.
If you look closely, you can see that the Taper is different!
Also, the Button part to push in is hard at first, so lubricate Large.
If it's not lubricated, it just hurts the belly of the finger that pushes it in.
How did it compare to other products?
The other Cable injector is Garbage.
Replace it now and throw it away.
Points and hangs of ▼ installation/Items to be purchased together/Opinions and requests to the Manufacturer
Other Cable injectors usually have the Body as Material:Aluminum, which is a material with a Body:Plastic, so I'm a little concerned about hydrolysis over time.
View detail
You can throw away everything but this.
[How is it used?
I used to use this type of Cable injector (https://www.webike.net/sd/2073358/), but I wasn't satisfied with it because I didn't feel like I was getting the lube in and it was leaking out.
I heard rave reviews about this product on the Net and wondered if it was true. I thought so I bought it and tried it.
Was the one you received as per Image?
As per Image
Other than that, there is a translation (Instruction Manual of input here is included) that YAZAWA-san may have put in. It is an easy to understand Instruction Manual.
How was your experience with it?
I was able to lubricate it without the lube leaking out due to its shape.
The Stress of lubricating the wires is gone. It is the best.
[Points to note]
There is a direction to the Rubber packing which is shaped like a piece to be put inside.
It is tapered, so you have to frame it so that the taper works.
How did it compare to other products?
The other Cable injector is Garbage. Buy a new one now and throw it away.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I think more people would be happy if it were cheaper.
It's a good buy because things are good.
View detail
The easiest to use wire injector ever!
I bought this one which caught my eye because I didn't like the operation feeling of Wire injector of common Type.
It is the method that the end of the Wire is jointed to the body of the cylinder shape, Grease is injected into the inside, and Grease is pushed in directly with the piston of the upper part. It is overwhelming smallness of the leak that should be noted, and it is transmitted that it is possible to oil quite efficiently from the appearance of the Grease which overflows from the lower end of Wire. Although I am not accustomed to it, I lubricate Clutch Wire and Throttle Wire, and I am satisfied with a new operation feeling that has never existed before.
Probably it is made overseas, but because Instruction Manual of the translation (please input here) is attached by the agency, it was able to use without a problem. There was an impact to dispose of the Wire injector which I had been using immediately. The price is reasonable, but I felt it was reasonable when I saw that Cylinder and Piston are made by SeaRing firmly. I recommend it.
View detail
This is an Ideas thing! It's pretty good
I bought it to try CableLube injection 。
I was wondering if it would be a good idea since it's 3-4 times the price of a regular Cable Louver, but it looks interesting Purchased
It may be a bit of a hassle to set up the installation (injection side & discharge side), but which Cable It's the same with Louver, and I've done it myself, so it should be easy for you guys
I injected the reputedly hard YAMALUBECable lube, which I completed with almost no leaks!
A little leak from the rubber packing at the end of the front side of the photo (anodized thin tube) But it's acceptable 。 An abacus-like rubber that attaches to the Wire's Guide in the Cable LouverV3 There's packing in there, but none of it leaks from there!
I have a feeling that lubricating the Accelerator Wire will be a piece of cake with this! 。
I'll try it soon as it looks like it could be used for bicycles
Cable lube won't go to waste, and if you have one in your family, it may last a lifetime
View detail