Reviews
Fits: SUZUKI DR-Z400S, SUZUKI DR-Z400S, SUZUKI DR-Z400S, SUZUKI DR-Z400S, SUZUKI DR-Z400S
SEA BASSOEMKnuckle cover
Part Number:57300-29811-YU1
Purchased for SEA BASSDR200S (overseas MODEL), an Off car, just in case.
I thought that the Knuckle cover for Base's DF200 DJEBEL would be fine, but when I searched for OEM parts, I found that the cover was for the lever of the DR-Z400S system, so I took a chance and ordered this part number. As a result, it seemed to be the right choice, and it was installed without any discomfort.
Clutch Side Material:RubberDust cover removed, play adjustment range reduced.
*This is not an applicable model, so use at your own risk.
The search function was very helpful FOR JAPAN MODEL not yet released models.
I would like to continue to check and make sure I am not making a mistake.
View detail
Diversion of 1000 to 650
As it turns out, it was not perfectly diverting.
To be precise, the Brake Side went on easily, but the Clutch Side did not.
You will need to create your own Bracket.
I chose it for its looks, but regretted it a little. OEMOption.
It also comes with a thick instruction manual, but it is almost useless. Therefore, there are some unusable parts left over.
View detail
Fits: SUZUKI DR-Z400SM, SUZUKI DR-Z400SM, SUZUKI DR-Z400SM, SUZUKI DR-Z400SM, SUZUKI DR-Z400SM
Knuckle cover
It is a quintessential OEM, pontoon.
It is an Exactly Design for an Off car, although it may be individual to look good or bad.
It is useful on rainy and windy days.
It gets minor scratches, but it does not fade and is perfectly durable.
View detail
Fits: SUZUKI DR-Z400SM, SUZUKI DR-Z400SM, SUZUKI DR-Z400SM, SUZUKI DR-Z400SM, SUZUKI DR-Z400SM
Just fit with Small processing
I wasn't sure if it would work for the BT1100, but it was inexpensive so I Ordered it.
It cannot be installed without modification, but it can be installed with Small modification. The brake side is made by using Nisshin's MASTER separate body MASTER, and the brake side is made by cutting the interfering part and melting the cut resin. The effect is that at speeds of 50 km/h or more, the fists are not exposed to any driving wind. 3SeasonGlove can also be used in winter.
Furthermore, when used in combination with SECDEM's Fairing, the area around the knuckle cover attachment point is covered, further increasing the windproof effect.
View detail
Hand/knuckle guards.
These are brilliant!!! If you need hand/knuckle guards for a gsf1250sa then these V-Strom hand guards are a perfect fit! Took less then 30 mins to fit and all fittings included! Just remember to take an allen key with you on your first ride out so you can adjust them for maximum effect! Brilliant!! Webike is my No1 go-to supplier now! Thank you, Webike! View detail
Knuckle guards fitted to Bandit GSF1250SA
Thank You Webike Japan! After much internet searching I ordered these V-Strom hand guards on 5th Feb. Delivered on 8th Feb. Fitted on 9th Feb. Very easy fitting and all parts included. The hand guards look like OEM Suzuki Bandit parts. Now I'm waiting for better weather so I can see how effective they will be. Thank you again Webike Japan! Joe View detail
Essential for adventure motorcycles, universal and can be installed by any manufacturer.
This product is all about the high level of universality that does not even require a manufacturer, and the high cost of OEM parts.
It was easy to install since the only fixing method was to pinch the grip end and screw the lever base.
Although many Adventure vehicles are not equipped with a grip heater at the time of purchase, it is useful to some extent for keeping out the cold during the winter, and it is also effective for keeping out the rain.
View detail
DL1000 handle bow guard
Lightweight material. Effectively filter the wind resistance caused by high speed driving. With a simple tool to complete the installation. View detail
The lower side is a bit more
With other people 's impressions "Manual is hard to understand" There was something, but since it was in the original illustration attached to the good parts without removing it, I first felt confused, too. Although it could be mounted without problems, about 2 points.
?Included Parts : of "Washer" Although the number of pieces was suitable, one type was Soft Material : As you can see in the illustration by Rubber, it will be crushed by Bolt, so I added it from my inventory. (Was there another way of using it?) ? On the Design, I think that the wind protection effect has gotten more Large if the lower part of the Cover is overhanging a little more loud.
Either way it was a wonderful thing of OEM, and overall I was happy that Cool and Exactly stayed on me.
View detail
OEM sense of security
With no esoteric work and work progresses to Smooth, as expected, OEMOption.
Design is not as good as Ya Ya, but there is no problem, it is lonely unless it is attached.
I also write other people, but I think that it is even better if you can purchase one by one.
View detail
Excellent appearance. NicePrice
If you are on a V-strike, you can definitely say that the standard product
Purchase at this time if the wind hitting the hand can be reduced
The wind that actually hits the hand actually decreases
3 SeasonGloves Level which can endure even outside air at around 5 degrees
Installation is simple, but the Instruction Manual has only a minimal explanation for the mechanic
Dimensions of parts used and Quantity : Pair (for Left and Right) , Removable method of OEM Parts Number is necessary confirmation
If you look from an authentic OffLoader it may not be reliable but if you are Touring Main
Features, both appearance and price are preeminent
View detail
I am satisfied with the atmosphere that is like Cospa and Adventure!
AdventureMotorcycle think that Knuckle guard is going well with you, OEM Product, Other Company Product (TOURATECH) Although it was coloring, the Other Company Product was nearly three times the price of OEM Product and Fitting was worried, so I made it to OEM Product firmly.
Regarding the installation, it was difficult to extract Handlebar Weight, and the rest was easy.
Handlebar Weight was desperately resisting as Rubber in the Handlebar would not be pulled out with a slight deformation.
If you spray water or CRC, thinking that aftertreatment is Large strange, loosing Bolt holding Handlebar Weight as much as possible, removing it while shocking or shaking Bolt in the direction of extraction with Handlebar Weight it is complete.
Well, since I think that there is nothing I can never leave, I just need to persevere with perseverance. (^ ^ ゞ
As a feeling of use, wind blow to the hand is reduced as a matter of course, and even in winter, a bit of finger sharpness is alleviated ,,,.
I feel that the atmosphere as AdventureMotorcycle goes up a lot better than anything, so that is the best.
Off-road is a flashy Knuckle guard, but Adventure is GS and something sober Black Knuckle
It is a Guard, and I think whether it is a standard if it is called a classic one.
Also, COSPA is good!
I do not think I will try to standing, but even if I should stand up, SlipDown, because it is about 5,000 yen it is also friendly to Wallet.
It will be costly with other parts if it is coca, but ,,,. (^_^;)
Personally there is no point of disappointment.
Given the price, the atmosphere after installation, I think Design, texture is enough.
Strongly pointed to future improvements, it is best if you can only buy one or only a few Parts, considering After.
After that, if design further improves, people who purchase the Other Company Product may no longer exist.
No, really, I'm satisfied.. (^o^) /
View detail