Reviews
useful accessories
My motorcycle is SUZUKI SV650. This bike is a street bike designed for the city. The front soil removal design is relatively short. When driving on rainy or slightly muddy roads, the mud will be thrown everywhere, so I use webike Bought this BODY STYLE Front Dirt Extension Kit on , which is easy to install and can be painted the same color as the body if desired. -------------------------------------------------- -------- My motorcycle is Suzuki SV650. This bike is a street bike designed for urban. The design is relatively short in front of the earth. It is driving on rain or a little muddy pavement. I bought this Body STYLE front soil extension kit. This kit is easy to install and can be sprayed into a body -like color if needed. Powered by Google Translator View detail
Fits: BMW R 1250 RS, BMW R 1200 RS, BMW R 1200 RS
Lost in flight while driving
As a mudguard, it was good at preventing engine dirt, but it was poorly glued and flew off while running and was lost.
So two stars.
View detail
Radiator protection.
The store put it on when the car was delivered, but during the break-in period it rained and I checked the Radiator during a break.
RadiatorBody is not contaminated and seems to be effective.
Installation requires drilling holes.
View detail
This is a good choice for those who are concerned about mud splashing.
[How is it used?
I bought this because I was concerned about mud splashing on RadiatorCore and Engine due to the short OEM Front Fender.
It is used as an extension of OEMFender.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It's not difficult.
It is necessary to be able to remove the front fender. Also, it is necessary to drill a hole to hold the support for fixing the brake hose.
It is easy to install with double-sided tape as long as it is aligned correctly.
For those who are worried about falling off, Plastic Tapping can be used to fix it.
I am worried about it falling off, so I use tapping to fix it.
How was your experience with it?
I think it is effective in controlling mud splashes.
I've been using the Fender extension since the beginning, so I don't know what the effect is without it, but without it, driving in the rain and splashing mud would be pretty bad.
[Included Parts:were they on?
Multiple pieces of Plastic Tapping, Double-sided Tape (Cutting done), Installation Instruction Manual
[Was there anything that disappointed you?
There is a clear difference in the appearance of the OEM Fender in terms of color and surface finish, so there is quite a bit of an acquired feeling.
I'm sure it's a combination of Cost, but this is the only thing I regret.
[Others]
Do not rush to align the installation point or hang. Do not forget to clean and degrease the attaching surface. After attaching with double-sided tape, fix the tape securely and leave it for about one day.
Also, you have to remove the OEMFender, so you'd better check how to remove it beforehand.
View detail
Fits: TRIUMPH Tiger 800 XC, TRIUMPH Tiger 800 XC, TRIUMPH Tiger 800 XC, TRIUMPH Tiger 800 XC, TRIUMPH Tiger 800 XCx, TRIUMPH Tiger 800 XCx, TRIUMPH Tiger 800 XCx
Dress-up and mudguard!
It looked plain, so I put Carbon Seat on the surface.
To install it, remove the Front Fender, and then use the Pin clip attached to the Es TensionFender? (4 → changed to 3.) After making a hole with the drill to fit the size of the tape, you can apply the attached double-sided tape.
After that, I warm up the Double-sided Tape in the Dryer and apply it to the Front Fender, put my weight on it and crimp it with my foot.
Then, make a hole in the Front Fender to match the hole in the ExtensionFender and push in the Pin clip to complete it.
View detail
Fits: SUZUKI DL 650 V-Strom, SUZUKI DL 650 V-Strom XT, SUZUKI DL 650 V-Strom, SUZUKI DL 650 V-Strom XT
Mud and water will not splash around
This is a good part, I only use double-sided tape to install it, but it's a problem There is none However, I cleaned it up when I installed it Be careful, you can't reapply it unless you decide it's yippy! View detail
Fits: KAWASAKI Z1000 SX, KAWASAKI ZX-10R, KAWASAKI Z1000 SX, KAWASAKI Z1000 SX
Functional product, I'm happy with it!
You can see the front pipe of the exhaust system and I'm concerned about the dirt on the Radiator, which led me to purchase the product in question, remove the Fender Sometimes the Brake hose clamps are in the way and it's a struggle to get rid of the cured tape to Fork and Fender Firmly affixed, the installation work will be more Large strange, thinking first Wash the back of the fender, degrease it thoroughly with the included alcohol, and align it so it doesn't come off Three attached Clip mounting holes with 4mm drill, Fender mounting is a circle of wisdom It's installed in good condition, no scratches! It looks like an OEM at a glance, and I am satisfied with Large change View detail
BODY STYLE front fender extension
The product seems to be made from decent quality plastic and is molded to fit the front fender of the 2017 Suzuki SV650 ABS. Instructions included are in German and comes with 4 tiny snap-on fasteners which need to be drilled onto the fender. Not wanting to drill holes, I instead attached the mudguard using the 3 double sided-tape already attached to product, although I think that wouldn't suffice so I stuck more 3M double-sided tape for extra insurance. In hindsight, epoxy would've probably worked better. Time will tell if this thing holds. IMHO, this product is over-priced for what it is. View detail
Fits: BMW R 1250 RS, BMW R 1200 RS, BMW R 1200 RS
Satisfied with price
I tried buying it by comparing the price with the competitor's product.
Paper File, adhesive, cleaning cloth was also included.
It is satisfying to purchase cheaply because there is no Large in the function.
View detail
Fits: KAWASAKI Z1000 SX, KAWASAKI ZX-10R, KAWASAKI Z1000 SX, KAWASAKI Z1000 SX
I am very satisfied.
It is necessary to drill the existing Fender and process the attachment part of the Brake line fixing Gold tool.
If you are not confident, you may as well leave it to PRO!
How to get dirty by rain running will be considerably reduced.
Looks also seemed to have come from the beginning!
View detail
Fits: SUZUKI GSF 650 S Bandit, SUZUKI GSF 650 Bandit, SUZUKI GSF 650 Bandit, SUZUKI GSF 650 S Bandit, SUZUKI GSF 1250 S Bandit, SUZUKI GSF 1250 Bandit, SUZUKI GSF 1200 S Bandit, SUZUKI GSF 1200 Bandit
I also added it to Rear ?
After attaching to the Front, Rear is also concerned ,,,,,
I tried it on Rear!
For explanation, there is for Front,
Rear is also Exactly.
I'm still happy with it.
View detail
Fits: SUZUKI GSF 650 S Bandit, SUZUKI GSF 650 Bandit, SUZUKI GSF 650 Bandit, SUZUKI GSF 650 S Bandit, SUZUKI GSF 1250 S Bandit, SUZUKI GSF 1250 Bandit, SUZUKI GSF 1200 S Bandit, SUZUKI GSF 1200 Bandit
Design is good!
In accordance with the Motorcycle, it was just making, it was Exactly. Design is also good.
I attach it with Double-sided Tape, but since there are only a few Tapes attached from the beginning, I attached a super powerful tape and attached it.
I did a Tour of 1000 km, but I arrived safely!
I think that the price is higher than Material.
However, I think that it will be cheaper if it is JAPAN,
I also think that this design can not be done.
View detail