Reviews
Shift Pedal
GizaGiza synthesis on the part where the clutch is attached looks like a bad lick! View detail
be extremely thorough, focusing on even the finest of details
I guess it depends on off-road boots and the size of the foot, but I replaced it with NORMAL because it was hard to operate in Standing.
After adjusting it several times while riding, I was able to operate it Smoothly and was satisfied with Large.
View detail
Fits: HONDA CR80R, HONDA CR85R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L/S, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY/S, HONDA CRF300L, HONDA CRF300L RALLY
Improvement of appearance
Parenthesis looks great - the shift position can be fine-tuned by rotating the tip... It is easy to install. View detail
Merit is Large size with your choice of Position.
I was not dissatisfied with the OEM, but I bought it because of the 4-position option.
Touch is also very good, and I think this Merit is Large because it is an important part for a 2-stroke vehicle like YZ125 that needs to be changed frequently.
The Bolt position is also better than the OEM position, which clamps from the bottom and is less likely to fall out.
View detail
In the targeted Position,,
The pedal position of the OEM YZ125X is a little low, but if the serration is moved up one notch, it is too high.
The result, as you can see in the picture, is the same as the OEM, or even lower, even with the tip adjustment turned up.
Then I tried to lower the tip adjustment while shifting the mounting position by one, but it was a little too high.
I tried it on a run, but I felt it was a little too high and difficult for me, although I guess it depends on whether you prefer to lift the SHIFT UP only by the ankle or by the whole foot.
A small difference can affect the operation quite a bit.
In the end, the position of the Serration was almost always determined by the position of the tip, and the tip adjustment could not be positioned to aim in the middle of the Serration.
The photo shows a ruler placed on the footpeg, I hope you can use it as a reference for the height.
If the height is right, it would look good and be good, I think.
Incidentally, the bolt at the tip was replaced with a good one just to be safe, and Screw lock was applied before installation.
View detail
Fits: HONDA CR80R, HONDA CR85R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L/S, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY/S, HONDA CRF300L, HONDA CRF300L RALLY
Beautiful.
Replacement from OEM Product.
Consider Forged Shift Lever and Revolver Shift Lever from the same ZETA.
If the difference is only about $1,500,
It's not a part that needs to be replaced that often, so it should be a good one!
You can choose the color, and even though we didn't do much, the parts are full of modifications!
Replacement is easy. Remove the Front ChainCover and pull out the Bolt with an 8mm wrench.
If it doesn't come off, give it a bit of a bang with a plastic hammer.
The problem is that OEM is Bolt mounted from the top and ZETA is Bolt mounted from the bottom.
I'm afraid I'll drop it if it gets loose. (^^;)
TipMount is shipped in a loosely assembled state,
Be sure to arrange for a screw lock agent to be applied at the same time before assembly.
View detail
Fits: HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA CRF1100L AFRICA TWIN ADV SPORTS
Shift change wearing off-road boots
Shift change in off-road boots was tough, so I replaced it with zeta's RevolverShift this time. However, I need 20mm more.
〜I wanted to raise it ~30mm, so I am going to order two different shorter length shafts from Dealer and try them out.
View detail
Fits: HONDA CR80R, HONDA CR85R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L/S, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY/S, HONDA CRF300L, HONDA CRF300L RALLY
Reliable Brand
The installation was flawless, as I would expect from such an expensive product.
It looks great and Parenthesis is great!
It would be nice to be able to change the Change section somewhat and change it to my preferred position.
I bought it because I didn't care about the performance and wanted to have it with ZETA…lol
View detail
Fits: YAMAHA XG250 TRICKER, YAMAHA XT250X, YAMAHA SEROW250
Best solution for OffBoots!
It's a little expensive, but it's ZETA, the trusty ZETA.
I am highly satisfied with the detailed workmanship.
I heard that if you don't use Screw lock, it will come off, so I did it right!
With NORMAL, it was difficult to operate even after making adjustments, but this is good because it allows me to make various settings.
I will try to come up with a more detailed Setting in the future.
View detail
Used for CRF150r2
It is good to be able to change the position as desired. View detail
Used in CRF150r2
I bought this pedal because I thought it would be a little better than the full size Motocrosser, because the Change Pedal is a little closer to the CRF150r2. I will change it to LongTip for Replacement and will get it. View detail
Fits: HONDA CR80R, HONDA CR85R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L/S, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY/S, HONDA CRF300L, HONDA CRF300L RALLY
Custom is a must for anyone who wears OffBoots.
Safe and reliable Zita; first Revolver, but I use OffBoots and am very comfortable with the changeable angles. Installation is easy. The problem was that the Honda OEM Bolt was too hard. Good product, great color. View detail
Fits: HONDA CR80R, HONDA CR85R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L/S, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY/S, HONDA CRF300L, HONDA CRF300L RALLY
Finding the right position
Purchased with the aim of improving operability in OffBoots.
I changed the position little by little while test driving. It didn't feel right, and I was about to give up when I changed the position for the last time, and after a test run, it felt so right that I was surprised!
I'm glad I bought it.
View detail
Shift Pedal
It is luxurious and somewhat adjustable.
There is a risk of cracking Crankcase.
View detail
From other outside Shift lever
Replaced other external Shift lever with this Revolver.
As described in the product description, 6 positions can be selected.
This subtle adjustment was good for me.
However, be sure to use Screw lock agent when installing or you will lose the tip.
Well built and good looking
View detail
Fits: HONDA CR80R, HONDA CR85R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L/S, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY/S, HONDA CRF300L, HONDA CRF300L RALLY
It is indispensable for dress-up.
I bought a CRFRALLY50 for touring main forest roads, so I decided to go with this Custom. View detail
Fits: HONDA CR80R, HONDA CR85R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L/S, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY/S, HONDA CRF300L, HONDA CRF300L RALLY
Fine tuning is possible!
I don't know about the durability yet, but the comfort is good because it can be fine-tuned. View detail
Fits: HONDA CR80R, HONDA CR85R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L/S, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY/S, HONDA CRF300L, HONDA CRF300L RALLY
Products for beginners to choose from
I am a beginner, but I find it quite difficult to position the Shift lever the first time, depending on how well the Off-road boots are rubbed, the position will vary. The screw at the base of the lever is positioned down so that the position can be adjusted without removing the Sprocket Cover. As for fine-tuning, the Revolver is a part where the boots hit the tip of the screw. (Silver color part) The holes are not in the Center, but in an unbalanced position, so that the upper and lower Quantities:Pair (for Left and Right) The adjustment can be fine-tuned to
root screw (or rather, a form that matches the GizaGiza of the part that fits). If you adjust the Revolver part in addition to the adjustment in the "Shift lever" section, you can bring the Shift lever to the position that suits your condition. However, I think it tends to loosen if you do not attach a light Screw Lock agent. It is a good thing if you check it every time you ride.
View detail
Fits: HONDA CR80R, HONDA CR85R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L/S, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY/S, HONDA CRF300L, HONDA CRF300L RALLY
Optimal ShiftLever position
I am satisfied with the optimal position for off-road boots, the lightness of the lever itself, the precision of the workmanship, and the position of the screws, all of which I could not get from the OEM. View detail
Fits: HONDA CR80R, HONDA CR85R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L/S, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY/S, HONDA CRF300L, HONDA CRF300L RALLY
In the long run, it may be cost-effective.
I bought this pedal because my previous Shift Pedal was running HARD and it was getting gnarly. This time, I decided to go with ZETA's trustworthy product. I bought Revolver Shift Lever on the recommendation of a friend.
The Head is worn out when it falls down or is used later, and as a result, this Type is Recommendation!
I think I hit a lot of rocks when I put it on and went out into the gorges, but it has held up well without bending or breaking. I am satisfied!
View detail