Reviews
perfect fit, good looks, not expensive
Very good product, solid chrome surface, good fit, low price in my opinion. It comes with everything you need to install. View detail
I'm satisfied
I installed it on a 2021 CB100EX.
The OEMSeat style was modern with a large tank and unbalanced, but just by installing this grab bar, a sense of solidity was created!
Plating paint is beautiful and the work takes about 5 minutes.
I'm glad I bought it
View detail
drastic change in handling
[How is it used?
After installing it, I installed the Rear stand, routed it, installed the Seat bag and drove it.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
Drilling the holes in the exterior was the hardest part. Since we did not have an electric drill, we used a pin vise to drill the center and then used a reamer to drill the hole. 2017RN52J model has a cutout groove instead of a cross, but it was troublesome to cut it, so we used a hole. Since the cutout line was square, I thought the screw position would be around the center point of the cutout line. After drilling 4 holes, I temporarily fixed the first point while holding the bar with one hand (to the extent that the Screw does not bite and fall off). Then, temporarily fix all four points. After the temporary fixation is finished, remove one bolt, insert the collar and fix it temporarily again. After doing this for four bolts, tighten the bolts with 20Nm. In this way, one person was able to install Smoothly.
How was your experience with it?
After the installation, I immediately lifted the car by the rear stand while gripping the grab bar, and it was so much easier than before. Also, when pushing the car backward, just having the grip makes a drastic difference. I wish I had installed it sooner. I usually wear a Seat Bag, but the Rear of the Grab Bar interferes with the Seat Bag. So I can't grip the bar of the Rear most when the bag is in place, but it is not a problem for use.
[Included Parts:were they on?
Color and Bolt
[Was there anything that disappointed you?
None
View detail
Great quality, easy fitment
Replaced my standard chrome bars with this unit, as I prefer black. The bars seem like really good quality, and the installation was pretty straightforward. I installed it a the same time as a tail tidy. View detail
Functionality and design are both GOOD!
XSR900 does not have a handle for tandem and I feel insecure when I ride on the back of XSR900. The design of the new handles is also suitable for the new model. View detail
Daytona
The handles fit like the original! Perfect fit for fasteners. It is now convenient to move the motorcycle and hold on to the passenger. Everything is also packed at a high level. Thank you ------------------------------------------------- --------- Handles stood as the original! Ideal came on fixture. Now it is convenient to move the bike and keep passengers. It packed and all at a high level. Thank you Powered by Google Translator View detail
How nice!
I'm very happy with the way they turned out! It was very easy to install, just pop it on! View detail
Very good
It fits nice, looks nice and works great. I'd give it 5 stars but the packaging allowed the ends to be smashed up against side of box and the plastic inserts broke. Webike/ Daytona sent out new ones from Japan to USA so no harm there. Also there was some scuffing on the finish where the plastic inserts go into the bar. Again it is minor, but it was again the poor packaging that allowed this damage. Also if looking directly from the back of the bike the bar is not completely level with bike. It is either a slight manufacturing error or damage, not sure which. I am not going to worry about it, it is minor. I didn't even tell Daytona/ Webike about those issues besides the plastic being broken. Overall I am happy with the product and will keep it on my bike! View detail
Very good and beautiful.
You should see the instructions carefully. Especially, the reflector must be removed under the seat so that the screw length is correct. Otherwise, you have to prepare a 30mm bolt separately, the position is correct and it is very strong. In my case, the bolt of the bike did not work well. It looks like a genuine product. Every time I feel, z900rs tuning products are very complete View detail
Very good and beautiful.
You should see the instructions carefully. Especially, the reflector must be removed under the seat so that the screw length is correct. Otherwise, you have to prepare a 30mm bolt separately, the position is correct and it is very strong. In my case, the bolt of the bike did not work well. It looks like a genuine product. Every time I feel, z900rs tuning products are very complete View detail
perfect
Hard to install (approxi 30minute) but it's perfect for z900rs, I strongly recommend this grabbar. Unlike genuine Kawasaki grab bars, where only the ends are fastened with bolts, for installation, the rear cowl is removed, the wiring is removed, and the tail light is separated and then fastened on top of it. It's a little angular and not excessive, so it's the best design for the perfect balance between the front and rear of the bike. There are two types of chrome and black, and if it is installed together with the front engine guard, it seems to be a good fit. View detail
It fits perfect.
ard to install (approxi 30minute) but it's perfect for z900rs, I strongly recommend this grabbar. Unlike genuine Kawasaki grab bars, where only the ends are fastened with bolts, for installation, the rear cowl is removed, the wiring is removed, and the tail light is separated and then fastened on top of it. It is a little angular and not excessive, so it is the best design for the perfect balance between the front and rear of the bike. View detail
I bought this for my wife to ride in
Tandem seat seems to be easy to play alone, so I asked my wife to sit in it Purchased to have it done
Installation is not a problem, as long as you know the bolts properly
However, it's hard to get the front side fixed bolts in
The accuracy was not great
I managed to narrow the Grab Bar by force and managed to tighten the Bolt (points deducted)
Lastly, I haven't tandem with my wife yet
View detail
I want you to make it along Seat's Line
Necessary to Tandem.
Necessary to Tandem.
Necessary to Tandem.
Necessary to Tandem.
Necessary to Tandem.
View detail
quality. It looks very good but interference with Seat was disappointing.
quality ? Accuracy etc. Although it is perfect, I felt annoying by interfering with the Grab Bar when desorbing Seat.
(It is not understood except by RS)
Although it is used as it is because it looks good, it may be removed if Seat desorption is frequent.
In addition, although it purchased thought that it would be easier to handle when walking around and setting up the Center Stand, it is not necessary for now.
However, it seems to be good for those who frequently do Tandem.
View detail
Can be installed securely
I think that it is a product that can be installed quite firmly as Grab Bar.
I think that it is made of iron Pipe, but the stiffness feeling is high. However, Material : Is it a little heavy compared to Aluminum's?
We have installed as a Bracket of Seat bag rather than Grab Bar.
There is processing of Side cover part, etc, but it is not particularly difficult work.
How to install
1. Side cover removal (Bolt 2 places Push rivet 7 places)
2. Drilling holes for mounting (4 places - Position as ordered)
3. Grab Bar Mounting
It is even better if you narrow down the Front side a little more, but it does not even feel like somewhat protruding.
You never hit the foot while riding.
View detail
It is solidly made
As a benefit other than the purpose of use, it is possible to prevent the tail lamp from being destroyed by putting it on the Tail lamp by mistake.. Processing is necessary for installation, but it is easy to split for Plastic hole opening. The thing is solidly made with iron, it is reliable, but it is heavy heavy. Personally, I will install it only when I need it, I will usually keep the hole opened by processing as a Tape. View detail
Essential items if Tandem
When Tandem at MT - 09, the person behind purchased this item because there is no place to catch it. Besides DAYTONA, there is also HURRICANE's Tandem grip, but this time, since we purchased DAYTONA's Side bagBracket at the same time, the compatibility of Parts etc etc etc. I decided on DAYTONA in consideration.
In fact, it seems that the feeling of security of the back person has increased significantly. Before installing Design, I was worried a lot, but it is quite nice to have Match Design MT-09 with Fitting like an OEM Product.
There is nothing wrong with installation, opening the hole.
The position to puncture was also marked from the beginning inside the OEMCover
Hang of installation firstly temporarily holds one of the four Bolt positions and then it is a victory.
Hope for Manufacturer - As for improvement, it may be better to make Tandem bar 's End cap a little more solid
The product we compared is HURRICANE's Tandem grip.
View detail
Although COSPA is excellent. - - -
Although it is said that it is manufactured exclusively for the car model, the mounting base of the lower part of Seat gets Small and it is not able to fill the vacant hole with the OEM. Cap that closes the hole of Pipe is not attached properly (Slightly diagonal) Sorry to be glued in a state.
Rear bag 10L of KTMOEM's power parts, GIVIetc. I can not install it by interfering with a bar for installing. It is possible to deform slightly and force it forcibly.
It's cheap compared to other Manufacturer's items is a good place. Regarding durability, it is a verification from now on.
View detail
A bit heavy
Easy to install once you can drill a hole in Cowl again
However, because it sandwiches four Spacers, this was a simple addition to Bracket and I wanted them to be welded.
It is Large strange to put four Spacers at the same time alone.
Simple to attach this makes it easy to walk around.
Just a little Quantity : Pair (for Left and Right) Because it protrudes into Side Back who is attaching may need confirmation
At the time of purchase, there was no HURRICANE thing, but now I want to decide from seeing the real thing.
View detail