Reviews
The shape is very good and well made
I was confused with the HURRICANE Fender Eliminator with mudguard Personally, I like the Number angle, which is not too much
However, the mudguard effect is naturally absent I have a splash guard from another company, but it flies to Seat As described by others, it protects the hole that passes Wiring with Cushion Tape I'd like the Cushion to be included in the package
View detail
Is good
I bought it because it was attractive that the Helmet holder is attached.. Because I was concerned about the Rear Fender which I thought it was Bottom, it was ◎ that I felt refreshing feeling and the usability of Holder was good. View detail
This is a nice thing ...
As you are told, I need a little hang for wearing.
I used a Helmet holder but it is convenient for the ground.
Reflector is optional as a matter of discontent though it is reasonable price
View detail
good!!
Among numerous Fender Eliminators,
It is feeling that the angle of License Plate is pretty much attacking!
Of course it is legal scope (Lol)
Just install it with License Plate Light's mounting plate
Number Plate Plate Plate for Reflector with additional addition
It is troublesome for A little to make License Plate, Reflector, License Plate Light and Center by combining the three holes with long holes.
Well I can fine-tune each one (Lol)
View detail
Good looking product
I order it for my Z125pro and installed it myself,it's not difficult to install, just follow the picture and make it step by step.i recommended it to my friend also. View detail
Recommendation for those who like bad feelings
The mounting angle is sharper than any Manufacturer's Fender Eliminator Kit, and it is jumping up.
It is not suitable for those who stick to visibility from the back, but OEMBlinker's
The mounting position is also perfect. Spongeetc. It seems to take measures against the mudguard of the cable inlet
Although it is described in the manual, I want a thin Sponge or Rubber sheet included.
View detail
It was good to change
In some Fender Eliminators, the angle of attachment was the best from the photograph, so I did this.
Installation is not so difficult, but some Wiring processing is necessary.
A totally new person may be confused.
Installation Instruction Manual is somewhat rough.
The feeling of use is very good without Wobble.
OEM is heavy, so I think you should install Fender Eliminator.
View detail
Refreshing looks and almost satisfied
Although the installation itself does not take so much time, if it takes time to remove the OEM Fender, if you dare complain, when you put the four bodies at the time of installing the body, the irritating feeling becomes MAX when putting it between the body and the car body Is it about? - - -.
If it is Street youth it will not be a problem as long as it is installed, but as soon as the Circuit runs it will irritate every time - - -. (? ▽ ?;)
For purpose of use with STREET & Circuit, it is necessary to search for falling prevention Washer so that Color does not drop.
View detail
Exquisite angle
Many Manufacturers have Fender Eliminator Kit out.
It was judged by photograph, but KITACO made the best angle so I decided.
Installation was a bit difficult but I was saved because Instruction Manual was kind.
If you do not touch Motorcycle too much, it may be good to leave it to Shop.
Because I need to remove Cowl, I think whether Shop is good before folding the claws or expanding afterwards.
I think that you can wear it without problems if you know how to remove Cowl.
Since I was not able to port OEMBlinker, the installation time was about 1 hour.
View detail
Refreshing!
Attached to new model Grom
I did not like the irregularly long Rear Fender and installed it.
Rear Fender of NORMAL is very heavy with Steel frame.
Large satisfied because it is also lightweight.
I wish Reflector should be set if possible.
View detail
Privately forbidden Custom
When considering CYGNUS X purchase, this is enough - - - I thought that.
Exhaust system exchange, Tire exchange, OEMFender seems to be unlucky.
After all I bought Fender Eliminator Kit.
As for mounting it was possible to do Smooth without any problems.
I think that it is a good thing as a product.
Tire pattern has become better visible, the purpose is achieved.
If you complain strongly, it is that the reflector was not screwed (Screw hole is empty in the pasted part of Bracket)
By removing OEMFender, you can see the invisible part.
I just made it to Fender Eliminator, but I'm worried about how to restore it.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Since the pure Fender was cut in order to attach an Inner fender, it attached. Although it is not an absolutely required Parts, since it looks poorly [ just for a moment ] when there is nothing, it purchases. If appearance was not asked, althou
Since the pure Fender was cut in order to attach an Inner fender, it attached.
Although it is not an absolutely required Parts, since it looks poorly [ just for a moment ] when there is nothing, it purchases.
If
appearance was not asked, although it may be possible, it purchased by commercial metal fittings.
There is admiration firmly by a Just size truly.
There is nothing that is replaced with
Colet.
It is good in it being merely a little cheaper.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
It purchased in order to feel refreshed the circumference of rear one of the fender less kit V125 (^u^) Since it also becomes a fender less to leave and cut the bolt hole to which a number plate is attached for a pure rear fender. The fender less kit
It purchased in order to feel refreshed the circumference of rear one of the fender less kit V125 (^u^) Since it also becomes a fender less to leave and cut the bolt hole to which a number plate is attached for a pure rear fender.
The fender less kit decided to purchase, since it was a thing of the type out of which is stopped four points and it comes with a bolt and which it fixes firmly when it was investigating in a net, although it thought that there was no necessity.
Although attachment is easy, it needs two work which cuts a pure fender (he cut with the disk grinder), and makes a hole with a drill.
Since the angle of a number plate will turn into a just right angle if a fender less kit is attached.
I attach and think [ (^-^) ] that it was good -- black alumite finishing feels a high grade feeling good for the bolt of the attached common button cap ? also for texture by the product made from aluminum (^^ -- it is a fender less kit of recommendation to the direction which has imagined the circumference of joke rear one in which 笙ェ light feeling is impressed (^-^))
View detail
The set is with good quality, fits and easy to install. With the description, I could fix it by myself. The set is stylish.
The set is with good quality, fits and easy to install. With the description, I could fix it by myself. The set is stylish. View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Attachment is easy if there are the tool and drill which cut a fender. The screw also serves as 4 stops and it is strong. I did simultaneous wearing with the rear inner fender. The circumference of back feels it refreshed and becomes smart! Si
Attachment is easy if there are the tool and drill which cut a fender.
The screw also serves as 4 stops and it is strong.
I did simultaneous wearing with the rear inner fender.
The circumference of back feels it refreshed and becomes smart! Since the run of the rainy day has not been carried out yet, splashes of mud are not verifiable, but I would like to write in play in detail by Ho of my diary again.
~ which is four stars since the result of a rainy day is not known
View detail