Reviews
Fits: HONDA CB1100 EX, HONDA CB1100, HONDA CB1100 RS, HONDA CB1100 EX, HONDA CB1100
Fit and better quality
The best quality ever than the stock one, lighter and stronger, three colors match your bike, and important thing its a corrosion resistant View detail
Fits: TRIUMPH STREET TRIPLE RE, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE 85, TRIUMPH STREET TRIPLE R
Lightweight is what I need most
I like sunstar's lightweight crankset, it is much lighter than the OEM crankset, and it is also very rigid. I fell in love with the EK3D chain after using it once before. It is very smooth in transmission, and the mute effect is also very good. It is not easy to be stretched, and you don’t need to adjust the chain frequently. It is very strong, and it is very affordable to buy a set very suitable. -------------------------------------------------- -------- I like the lightweight tooth tray of Sunstar. Its weight is much lighter than the OEM tooth tray, and the steel is very strong. I fell in love with the EK3D chain once before. It is very smooth in the transmission, and the mute effect is also very good. It is not easy to be stretched. It does not need to adjust the chain frequently. very suitable. Powered by Google Translator View detail
Good balance of cosmetics and performance!
Used on CB400sf.
For Touring riders, cosmetics are important.
There are no glitches at all.
Sufficient for general riders.
View detail
Fits: HONDA CB1300 SUPER BOLD'OR, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER FOUR
Time to replace it!
With about 43000km on the clock, I thought it was time to replace the Chain and Sprocket as a set.
If you want to replace the whole set, it will cost a lot of money, but luckily, WehBig has a SUNSTARSprocket and DIDChainQuantity on sale!:I found a set set and bought it.
It was easy to change the chain because it was already cut. The ride quality is smoother than before and the Axel feels better. I don't know about the durability yet, but I hope it will last.
View detail
Fits: HONDA SL230, HONDA XR230
Replacement for OEM.
Both the number of LINKs and the number of joints are as per OEM, and since it has been changed to Rivet Joint, it can be worked as per Service Manual. View detail
Fits: SUZUKI GSR250, SUZUKI GSX250R, SUZUKI GSR250F, SUZUKI GSR250S
I'm lighter
I replaced the front and rear Sprocket and Chain of the GSR250 with this product
I saw a rumor on the Net that the removal of the Driven Sprocket is pretty Large weird It's easy to use the 50cm SpinnerHandlebar while stepping on the rear brake I was able to remove it to
Sprocket on the Driven side was pretty heavy with the OEM being Steel I feel like the ride is lighter now that it is Aluminum
View detail
Fits: YAMAHA WR250X, YAMAHA WR250X
Replacing the WR250X
I drove the WR250X about 25,000? I wanted to exchange it for Sprocket and this Quantity:I bought the set
If there is no change in the secondary deceleration, then the vehicle-specific Quantity:The Set products are easy to choose and affordable The design is good and light weight compared to the OEM, the design was good, Large was the correct answer If you are going to replace it, it is definitely recommended than RearSteel
Changing the Chain/Front Sprocket to a new one will revive the ride The chain that has a life span is found to have quite large friction loss I did
View detail
Fits: KAWASAKI Z900, KAWASAKI Z-1
Largeness of Friction loss surprising at SizeDown of 525 - - -
I was using 530 Chain but 525 Chain was also available for Large price price so Choice. I was stunned after assembly - - - Just by turning the rear wheel by hand, I keep turning around - - - Of course, although Chain has been stuck before, it is Large satisfied item even if you deduct it. View detail
Fits: HONDA NS250R, HONDA NS250F, HONDA NSR250R
Even without looking it is set. There are settings even with this old car!
【What made you decide the purchase?】 Drive Series Set by Type Can Be Purchased without Lost. There is no such optimal product to total.
【How was it actually used?】 All necessary items are included. I did not use Chain's Joint for Set, but basically it's convenient because there is nothing else required. Follow Gloves not to get your hands dirty.
【Was it difficult to install? (Hard parts case)】 It was difficult to be honest - -. Because it is troublesome to reach the Front sprocket of NS 250 R. Remove Cover, Parts that do not go high and face up obstructing the way. Later, whether the play of the Front's Sprocket is Large or not, I am a bit uneasy with a shaky ....
【Please tell me the point of installation and hang (in the case of Hard parts)】 Be sure to add Gloves with it. Since Oil of Chain is painted on Gittigo, I have a hard time to wash away it when I get it.
[Is there anything I was disappointed about?] nothing special.
【Hope for Manufacturer - Please let me know if there are any improvement points】 I wish it would be better if you added SLJScrew joint so that you can Joint Chain without special tools.
【Have you compared items?】 I was wondering whether to buy it at bulk sell ....
View detail
Fits: KAWASAKI Z1-R
With Z1's OEM drive system update!
I purchased it by updating the driving system of Z1. Since it was Point 10% BackCampaign to SUNSTAR & Ezuma EK's secure Brand Combination it immediately purchased ♪ We are looking forward to finish checking the arrival items. Although Chain was 112 LINK this time, I think that it is better if there is a set item of 110 LINK as 110 LINK is proper as it is OEM conversion. Still we are satisfied with the item so we will also use the next Big Big ♪ View detail
Fits: YAMAHA TT250R RAID
Buy with Set price!
Chain used until now is OEM (D. I. D), RK this time I chose EK. Among them, EK felt that Friction was the most frequent. And I think that the weight was also lighter than the RK. I felt that the color looked poor and the strength was weak because of Steel. (RK Gold before exchanging) However, it looks to the last. Size is the same 428 and since it is a reliable Manufacturer, I think that strength is not worried. And what is the durability in future use.
SUNSTAR's Sprocket (R) But, OEM (Steel) It is an exchange from. So Aluminum is really light! Duralumin Silver is pretty. Astringent feeling. So, Chain still matched by Gold, definitely. I would like to see the future durability as well.
View detail
Fits: HONDA 400X, HONDA CB400F, HONDA CBR400R, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA 400X, HONDA CB400F, HONDA CBR400R
very satisfied
Purchased for Chain's rattle rattle and sticking getting worse.
Because I did not change the number, so for Seta Z
Extremely helpful.
As for the contents, it is the same as the Single Item sale item, so we omit it, but before and after Sprocket
You can purchase less than 10% cheaper than purchasing Chain with Rose, and it is not possible to prevent buying mistakes
I think that it is Merit.
View detail
Fits: KAWASAKI ESTRELLA, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA CUSTOM LE, KAWASAKI ESTRELLA RS CUSTOM
After all it is Set
Balance is necessary because it affects weak places even if you upgrade the strength partly. I think this is good. I am looking forward.
Rear's Sprocket is amazingly light. It is good to have both Crimp and Clip. !
View detail
Fits: HONDA CB400 SUPER FOUR Version S
Saved with Set
CB400SF ver. Since the Sprocket 's Sprocket has become considerably worn, I tried various things with Chain thought, but it was easier to find it because it was Set rather than searching with Single Item. Moreover, I think that I could buy it cheaper than buying it with Single Item. View detail