- Home
- Product reviews
- Search reviews
Reviews
Hyperpro Steering Damper Generic Clamp
Standard clamp suitable for installation to Yamaha FZ1. May not suit every bike. Need to check dimensions. If u sure just buy the full mounting bracket set from Hyperpro. Finishing gold color coating not fantastic as does not seem even and looks thin. View detail
GCraft Recommended Parts
Each part is required to install the steering damper to the GROM The first thing you will need is a GCraft steering damper for GROM Bracket The Steering Damper Bracket for GROM made by GCraft is a product of GROM This is a product manufactured with limited space and the quality of production is excellent and highly recommended! Now, after selecting the GCraft Damper Bracket for the GROM, the GCraft The Damper Bracket recommended Parts are Steering Damper by Hyper pro Body clamps to secure the Steering damper with Hyper pro Body Clamp Type 3 is required
Hyper pro Body Clamp Type 3 Impression
Hyper pro Body clamp TYPE-3 has a built-in pillow The Steering is set to Quantity:Pair (for Left and Right) When you move the steering damper, the steering damper also moves The movement of the steering damper is controlled by the Body clamp/TYPE-3's built-in pillow The steering dampers are designed to be controlled by the steering damper Also, if you tighten the M6Bolt on the body clamp with the prescribed torque, you can adjust the Steering Since the damper body will be deformed, the damper bracket should be tightened with the sensation of the hand In addition, use the Body clamp Type 3 with the Damper Bracket made by GCraft with Bracket's "Low Head Bolt to secure it in place Be careful not to make a Bolt mistake when doing so! But... it's different in appearance from the other Bolts, so I thought it would be Large strong! I think so, but don't panic, it's a confirmation
It is important to note that the Body clamp Type 3 is used as a Steering Damper When fixing the bracket to the post section of the bracket, use the screw locking agent on the bracket Apply the Screw Lock agent to the tip of the screw thread, and then attach the Body clamp TYPE-3 to the body clamp At that time, apply the screw lock agent to the body clamp/TYPE-3 with the low head If you apply Screw Lock agent without passing through the Bolt, you will not be able to get a good result Be careful not to get any screw locking agent on the pillow part of Body clamp TYPE-3 It is
By the way... When I use Screw Lock agent, I use a small amount of Screw Lock The Screw Lock agent is applied and stretched with a toothpick The screw lock agent is also used as a screw lock agent for radio control helicopters (medium (strength) Also, the Screw Lock agent will weaken the Screw Lock function when heated When redoing or removing the bolts that have been coated with locking agent, use a heat gun or soldering iron to remove them Warming it up will loosen it up!
View detail