Reviews
Fits: HONDA Broad90, HONDA Lead 100, HONDA Cabina 90, HONDA Joker90, HONDA Lead 90
The trough of the Torque during acceleration is gone, so it was right to replace it
I changed the weight roller to various settings, but I'm not satisfied with it When I contacted KN Planning, I found out that the groove on the Torque Camshaft is not the same as the OEM groove I tried it because it said it was a straight line type, not 。 You are correct The hill is also accelerating uphill
However, there was a splash of Grease in the Case and
I'm checking to see if it feels like it's vibrating a little bit
View detail
Fits: HONDA Broad90, HONDA Lead 100, HONDA Cabina 90, HONDA Joker90, HONDA Lead 90
Clutch block for honda joker 90 (SRX90)
06/02/20 received a clutch block. The block was bought for a Honda Joker 90 (SRX90). At first glance, everything is fine. Clearly readable made in Taiwan. Began to compare with the original Japanese-made clutch block. The naturally purchased unit was dismantled. The spring is 4 mm thick as standard, and the length is 1 turn less than the original spring (147 mm). The thickness of the metal of the cheeks is 0.5 mm thinner than the original. The quality of the metal is questionable. The pins (23225-GW3-000 and 23226-GW3-000) in the counter cheek are not properly finalized (I will buy the original from Japan). Parts from the original catalog (SRX90): 23239-GW3-850 and GCK3-E0700, which are inserted on the spring, are not available at all. The clutch plate is made at 3. The stem that holds the ferodo pad is made like at home. The Ferodo clutch plate is 100 times better. Bottom line: I'm not happy with the purchase. The original Japanese block is certainly better without comparison. The spring for replacement, pins and rollers on the counter cheek for replacement, the metal of the cheeks is thinner than the original and the quality of steel is dubious. 06/02/20 received the clutch unit. The unit was bought on a Honda Joker 90 (SRX90). At first glance, everything is fine. Clearly readable made in Taiwan. He began to compare with the original Japanese-made clutch unit. Naturally purchased unit was disassembled. The standard spring is 4 mm thick, and the length is 1 turn less than the original spring (147 mm). The thickness of the metal cheeks is thinner than the original by 0.5 mm. The quality of the metal is doubtful. The pins (23225-GW3-000 and 23226-GW3-000) in the reciprocal cheek are not really finalized (I will buy the original from Japan). Details from the original catalog (SRX90): 23239-GW3-850 and GCK3-E0700, which are inserted on the spring, are completely absent. The clutch plate is made on 3. The rod that holds the block with the ferodo is made as at home. Ferodo clutch board is 100 times better. Bottom line: not satisfied with the purchase. The original Japanese block is certainly better without comparison. Spring for replacement, pins and rollers on the reciprocal cheek for replacement, the metal of the cheeks is thinner than the original and the dubious quality of steel. translated by google translate View detail
Fits: HONDA Broad90, HONDA Lead 100, HONDA Cabina 90, HONDA Joker90, HONDA Lead 90
Clutch KN 7003-5-A on the Lead 90 moped
I bought a KN 7003-5-A clutch for a Lead 90 moped. I bought two clutches. since The Lead 90 moped, although old, is very reliable. And these clutches won't last forever. Clutch KN 7003-5-A tuning, i.e. the cups of this clutch have a larger diameter than the usual ones. That will possibly add power to the engine of the Lead 90 moped. I liked the clutch as a whole, but the lining is somewhat thin. The KN 7003-5-A clutch has an inscription that it is not produced in Japan but in Taiwan. I bought a KN 7003-5-A clutch on a Lead 90 moped. I bought two clutches. because moped Lead 90, although old but very reliable. And these clutches will not be sold forever. Clutch KN 7003-5-A tuning, ie cups of this clutch have a larger diameter than usual. What will possibly add power to the engine of the moped Lead 90. Clutch generally liked, but somewhat thinner lining. The clutch KN 7003-5-A has the inscription that it was made not in Japan but in Taiwan. translated by Google Translator View detail