Reviews
Fits: HONDA CBX125, HONDA MAGNA50, HONDA REBEL(-1999), SUZUKI RV200 VANVAN, YAMAHA TW225E, YAMAHA DRAGSTAR250, SUZUKI DESPELADO, HONDA 250T, HONDA CB400SS, HONDA CD125, HONDA PS250, HONDA JAZZ, HONDA CB400T CB250T, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI VOLTY, YAMAHA YB-1, YAMAHA VIRAGO250(XV250), Others
Review 2 years use
It is used for installation on VANVAN 200, Review at the end of 2 years.
■ General ■
? I have weight.. I think that it is basic Handlebar Mounting, so I think that there is little influence on maneuverability.
? Although there are also Review that rust is easy, Bolt kind is certainly easy to rust. Rust inhibitor does not rust so much like a photograph with spraying and washing with legume. However, Bolt of the Handlebar attachment part quickly became red, so I replaced it for Stainless Steel.
Windshield's transparency and SmallWound do not matter too much after 2 years.
Mounting ? Accuracy ■
? I do not feel high accuracy is high, but it is enough for practical use.
? Although I saw somewhere in the restaurant saying that it is difficult to install, temporarily tighten in order of Handlebar section → Arm section → Screen Body (It does not move even if it is left, but it moves as soon as you put your hands by hand) While doing so, I think that it will be easy if you align at the end.
? Due to the vibration of VANVAN, I do not know whether it is due to installation, Crack has occurred on the Large scale considerably in the Screw fastening part of Screen. There is no such thing as wobbling or it seems to be broken so I will continue to use it as it is.
? HandlebarWound for prevention and rust prevention 0. I'm installing a 5 mm thick Rubber in between.
■ Rectifying effect
? There is sufficient rectification effect. The wind pressure from the chest is considerably reduced.
? There seems to be no unpleasant resonance blur as heavy Merit.
? I do not like Screen entering Large in the field of view while driving, so I think that it is the best size in terms of the balance between visibility and rectification effect. If you want to prioritize the rectification effect, it may be better to use Large Screen.
■Cost performance■
? Although the price is cheap, detailed Crack has occurred as described above. It will be best if you keep it like this for another few years. At the moment we will be ☆ 4.
View detail
Fits: HONDA CBX125, HONDA MAGNA50, HONDA REBEL(-1999), SUZUKI RV200 VANVAN, YAMAHA TW225E, YAMAHA DRAGSTAR250, SUZUKI DESPELADO, HONDA 250T, HONDA CB400SS, HONDA CD125, HONDA PS250, HONDA JAZZ, HONDA CB400T CB250T, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI VOLTY, YAMAHA YB-1, YAMAHA VIRAGO250(XV250), Others
It is largely satisfactory
Up HandlebarREBEL (1996 formula) Mounting on.
Since there is no manual, I consulted the image on the web.
There is only Universal type and the degree of freedom of installation is high.
Adjust front / back angle of Screen with Color of Screen side, Quantity of Screen at Color of Handlebar Bracket side : Pair (for Left and Right) Adjustment, HandlebarClip can adjust the whole up and down. And apart from these, you can adjust the screen height to 3 levels.
Because it is a Universal type Meter - It applies to the sense of unity with the surroundings, but of course there are windbreak effects.
If you make a fault,
Screen size is (Height) You may make a little more Small.
Bracket is too long to be extra.
Is it about?.
View detail
Fits: HONDA CBX125, HONDA MAGNA50, HONDA REBEL(-1999), SUZUKI RV200 VANVAN, YAMAHA TW225E, YAMAHA DRAGSTAR250, SUZUKI DESPELADO, HONDA 250T, HONDA CB400SS, HONDA CD125, HONDA PS250, HONDA JAZZ, HONDA CB400T CB250T, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI VOLTY, YAMAHA YB-1, YAMAHA VIRAGO250(XV250), Others
Wind less hits the body.
? 【What made you decide the purchase?】
Price and Universality.
? 【How was it actually used?】 Required
The wind hitting the body will be less, but because of the involvement from the upper edge of Screen, the wind that hits Helmet is quite disturbed and the head is shaken.
? 【Was it difficult to install? (Hard parts case)】
Installation is easy, it will not take as long as an hour.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
The Clamp to be attached to the Handlebar needs to tighten the tightening Bolt considerably, but the Clamp itself is not so rigid and it is possible to fix the mounting position.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
? [Is there anything I was disappointed about?] Required
I thought that we could let the wind go a little more, but the head is rather a feeling of wind.
? [Request to Manufacturer - Please let me know if there are any improvement points】 Required
Rust of screws will come soon. I want you to raise the rust resistance a little more.
? 【Have you compared items?】 Required
There were almost the same products in World Walk, but this one was cheaper and purchased here.
? [Others]
I temporarily lost some of the parts at the time of temporary fixation, but as soon as I contacted Manufacturer, I sent the same parts. After Follow was very good.
View detail
Fits: HONDA CBX125, HONDA MAGNA50, HONDA REBEL(-1999), SUZUKI RV200 VANVAN, YAMAHA TW225E, YAMAHA DRAGSTAR250, SUZUKI DESPELADO, HONDA 250T, HONDA CB400SS, HONDA CD125, HONDA PS250, HONDA JAZZ, HONDA CB400T CB250T, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI VOLTY, YAMAHA YB-1, YAMAHA VIRAGO250(XV250), Others
Dissatisfied
Since there is no Instruction Manual, the part to be attached to the Handlebar was attached for the gathered part, but it is loose even if you tighten it or tighten it, because Screw is heavy use, it will wobble even in the temporary pair, even when Screw of the Shield part is honed and loose , This product is only for Shield, Gold items are useless. View detail
Fits: HONDA CBX125, HONDA MAGNA50, HONDA REBEL(-1999), SUZUKI RV200 VANVAN, YAMAHA TW225E, YAMAHA DRAGSTAR250, SUZUKI DESPELADO, HONDA 250T, HONDA CB400SS, HONDA CD125, HONDA PS250, HONDA JAZZ, HONDA CB400T CB250T, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI VOLTY, YAMAHA YB-1, YAMAHA VIRAGO250(XV250), Others
Dissatisfied
It is better to have an instruction manual. If you install it by yourself, tightening Screw that takes over an hour is full and you have to install it while it is loose. View detail
Fits: HONDA CBX125, HONDA MAGNA50, HONDA REBEL(-1999), SUZUKI RV200 VANVAN, YAMAHA TW225E, YAMAHA DRAGSTAR250, SUZUKI DESPELADO, HONDA 250T, HONDA CB400SS, HONDA CD125, HONDA PS250, HONDA JAZZ, HONDA CB400T CB250T, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI VOLTY, YAMAHA YB-1, YAMAHA VIRAGO250(XV250), Others
The product looks good.
The product looks good, though (^ ^;
I want you to attach manuals position.
There is no choice but to assemble it properly (^ ^;
Because some people do not understand, you need a manual?
View detail
Fits: HONDA CBX125, HONDA MAGNA50, HONDA REBEL(-1999), SUZUKI RV200 VANVAN, YAMAHA TW225E, YAMAHA DRAGSTAR250, SUZUKI DESPELADO, HONDA 250T, HONDA CB400SS, HONDA CD125, HONDA PS250, HONDA JAZZ, HONDA CB400T CB250T, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI VOLTY, YAMAHA YB-1, YAMAHA VIRAGO250(XV250), Others
Clear flow effect as it is
When I traveled on a highway with ETC attached, I installed it because there was a lot of wind pressure.
It's not so difficult to fix it to the Handlebar.
Impression that I wore and traveled on a highway obstructed the wind from the chest to the neck so it became a little easier.
As a problem, I think that the gold tool is easy to rust so I can Plating it.
View detail