Reviews
Power management for old cars!
Purchased to manage power supply for old car!
I am impressed with the function-specific split, and I love the fact that I can visually determine the information I need!
View detail
It is still a necessity for old motorcycles.
The vehicle is 30 years old, so I installed it to know the electrical system Trouble in advance.
This product is small in size, so there is no sense of discomfort even if it is installed in an easily visible place.
Wiring is also easy and practical.
View detail
Small and can be installed anywhere.
I have installed them on all my cars. It is easy to install, just connect the 3 wires to the designated points, the back light comes on, and it is small but easy to see. View detail
One of the best voltmeters out there.
Very compact yet clear enough to read the display under any kind of light. Installation is also a breeze. Thank you very much! Very happy with my purchase. View detail
Compact voltmeter
It is a very Compact voltmeter.
I like the fact that it is simple, with no extra functions, just displaying the voltage.
The power supply Harness included with this product is Red (+, with Hoe Type Terminal) 、Black (-, with Hoe Type Terminal) 、White (+, ACC) The Red line is used to measure the voltage and the White line is used to power the Meter.
To measure battery voltage, connect the Red and Black wires to the Battery terminal, and connect the White wire to an appropriate Accessories power supply.
I wanted to get the voltage from the Accessories power supply, so I put together the Red and White wires and connected them to the Coupler along with the Black wire. This will allow the Accessories power supply to connect to the Red and White wires, and the Black wire to Minus.
One wiring Connector is also included, but it would be better to make your own if possible.
Installation on the vehicle body is DAYTONA's MultiMeter Bracket (97253) https://www.webike.net/sd/24069527/I bought a pair of the 22.2 Mount bar because it was recommended.
Appropriate visibility both during the day and at night.
I am very satisfied with the product, as there is no difficulty in seeing during the day or too much glare at night.
View detail
Compact and highly visible voltmeter
The Oil Temperature Meter made by DAYTONA was installed, but since there is an opening in the bracket, a voltmeter made by the same manufacturer was installed.
I saw it.
The Size is the same, so it fits together well and looks good.
It functions well as a voltmeter, with a red warning lamp to notify you when the voltage drops below 12?.
Since the voltage increase/decrease is displayed in real time, it may be possible to predict when to replace batteries.
View detail
DAYTONA products are good.
As expected from DAYTONA, it is safe to use. It is good that it turns red when the voltage drops. View detail
Compact
The numbers on the LCD are easy to read, and the body is just the right size for mounting anywhere as long as there is space. View detail
Fallen cannibals
This is a must-have part when purchasing a vehicle. Since the voltage can be constantly monitored, it is possible to notice battery malfunctions as soon as they occur. Also, it is easy to manage the electrical parts such as the grip heater because it is easy to see at a glance how much load is being applied to the parts. The price has gone up compared to the past, but the quality and performance are excellent, so it's a good thing. However, the wiring is incredibly long. I use it by cutting it in the middle. View detail
It fulfills the functionality required for Simple.
I installed it to constantly monitor for voltage drops when electrical troubles were frequently occurring in my vehicle.
I think it is good that the small type has a simple function of displaying voltage, and also notifies the user with a red light when the voltage drops. The simple functionality makes wiring easy.
The Good
Simple and Small Type. The texture is not bad, and depending on how it is installed, it does not give the impression of being attached afterwards or complicated. It is also a good feature that it glows red when the voltage is low. It is helpful to be alerted when you need to be careful without having to check the values in detail.
[Concerned].
The Contrast of the LCD is weak and the viewing angle does not seem very wide. There is no problem when viewing from the front, but it is difficult to check the values when the Layout is viewed from an angle. In my case, I did not need to check the values while driving, but installed it in a slightly secluded place because I thought it would be good if I could check the values when the voltage dropped to the point that it glows red.
I think the printed logo is too large, which is completely a matter of taste, and the simple appearance is somewhat spoiled, so I think the balance would be better if it were a little more modest.
View detail
For BAT charge voltage monitor
I have often heard that the regulator of RC42 is fragile, and since my car has been driven for more than 10 years, I was concerned about the life of the regulator−, so I installed it to monitor its function.
BAT voltage can be checked immediately by turning BAT S/W ON, and this can also be monitored. It is also a good feature that the back light of the product in question turns red when the voltage is low.
After installation, during the operational inspection in the E/G operation state before driving, we were able to confirm that the indicated voltage of the product in question and the voltage indication of the charging voltage of the BAT section measured with the Tester were almost identical, which made us think that the voltage indication could be trusted as well.
In some cases, there was a slight difference in voltage between idling and driving.
I think it is a good piece of equipment because it can monitor the status of the BAT and the power generation system by monitoring the voltage with it. I am also very satisfied with the cost performance.
View detail
BoltMeter Installation
Installed to check battery voltage. View detail
Convenient to have
I was looking for items that can display and manage voltage in the simplest way, especially in cold weather, and I found this product. I am satisfied with the necessary and sufficient functions. View detail
Compact and highly visible!
I bought it to know if the voltage is stable at all times as I have installed Navigation on my Motorcycle …
I know it's hard to tell from the picture, but it's just so visible!
It's reasonably priced, wastes no space, and is easy to read… I can't complain about this voltmeter!
It's Recommendation!
View detail
DAYTONA Voltmeter
Installed on GSX-R 750 K4.
The installation itself is fairly easy.
Just connect the line to Battery and take it from another pcAttachment.
No tools are required other than to remove the Motorcycle Cowl or Seat as it comes with an Electro Tap.
I did not use Electro Tap because I did not want to use it.
I think it is waterproof, so it is durable even if it gets wet, but the silicon on the connector side is a little bit too soft.
If you are concerned about it, I recommend that you fill in the gap with a glue gun or something similar.
The one I bought is a cosmetic on top of having everything I need at least yesterday because I also have Warning yesterday.
View detail
Peace of mind with constant voltage monitoring
It is safe to monitor the voltage at all times.
I am happy to see the voltage change when the car is stopped and running.
Double-sided tape is included for mounting, but I cut and attached something like removable Magic tape.
The following is a kind of Magic tape. For your reference.
3M Scotch Surface Fastener for fixing 20mm×75mm Quantity:1 Set of 2pcs. DK-94
View detail
ส่งไว สินค้าคุณภาพจากญี่ปุ่น แข็งแรงทนทาน มีคู่มือการติดตั้ง เรียบร้อย ขนาดกระทัดรัด มีไฟบอกการแจ้งเตือน แบตเตอรี่จะหมด View detail
★All you need is a peace of mind! ★All you need to know!
Real time voltage can be checked, so you can see the power generation status at a glance and have peace of mind.
There is a back light, but it's hard to see outside, so I recommend mounting it so the board is facing you!
(If it is tilted, it will instantly become invisible lol)
View detail
Compact is fine.
I bought this product because my new battery was destroyed within a month due to a regulator failure I did not notice. It is a voltmeter, so I am not looking for any particular functions, but it is simple and good. I don't ride my motorcycle every day, so I can see the battery status at a glance, which gives me peace of mind. View detail
Mounted on ZX-6R G type
Mounted on ZX-6R G type
I had a D-UNIT WR from DAYTONA before.
I installed it on this.
Since D-UNIT has a built-in Relay, I connected the AttachmentPower Supply Cable and the Power Supply Cable of this voltmeter together by crimping them together.
View detail