Reviews
Fits: Others
Excellent matching with bremboRCSMASTER
I installed it on a CBR250RR 2023 MODEL. the Handlebar is a kit from Over RACING, but I was able to install it without any problems.
Selected this product to match the brembo RCSMASTER that was already installed.:Pair (for Left and Right) Both can be fitted with Koken's AeroLever, which gives them a unified look and feel and looks great!
The fitting of the clutch cable is not good because it is not an exclusive design of the car model.
Since it is originally an AssistSlipper clutch, the lightness of the operation cannot be felt. The original clutch is quite light.
The rattling of the Pivot on the Lever is much larger than OEM and Eukanaya, Spec. It seems to be
Made in Japan, the texture and construction is very high quality. It also looks good. However, the price is a bit high considering the cost performance. It did not exceed my expectations.
View detail
Fits: Others
Clutch Side is also unified with RCSMASTER
What made you decide to buy?
I had changed to brembo 19RCS Master Cylinder and wanted to unify the clutch side with RCS MASTER, but I had extra income, so I decided to use "KOKEN".:I purchased "Mechanical Clutch Holder L-29 Aero Lever Set". 。 I really wanted to go with bremboLeverSpec. but recently there is no bremboLever Kit for sale, so I bought Lever as Single Item. Well then. Why didn't I buy Holder Only?" is … The included AeroLever is a spare part in case of emergency!
[How was the installation?
At the conclusion … it was quite fiddly. it was easy to remove the OEM Clutch holder and Lever, since I had replaced the U-KANAYA Lever before. (Don't forget to loosen the Clutch Cable including the one on the body side before starting the work!) If the OEM Clutch holder comes off, Kohken:I am trying to install the Mechanical Clutch Holder, but the Outer end of the loosened Clutch Cable does not fit. (Sweat) If you force the work, it will cause scratches. After thinking about it, we separated the Mechanical Clutch Holder from the Lever, and put the Outer End on the Holder first. (ZX-6R uses the included Wire Spacer.) and align it with the PunchMark in the Handlebar, and then use the HolderBolt (7.8Nm) Next, attach the end of the ClutchInner cable to the lever that was removed and merge it with the Holder. Next, attach the end of the ClutchInner cable to the lever that was removed, and attach it to the holder to complete the process. (This is the same method as the Lever replacement process.) The Koken instruction manual does not go into detail, so if you are not comfortable with the work, you can leave it to PRO.
[work reference …]
Before loosening the nut that fixes the clutch cable on the body side, measure the length with Caliper before loosening it, so that it will be easier to adjust the clutch after the work is done. 。 It is also a good idea to lubricate the Clutch Cable as you remove it. 。 KITACOConvenienceParts for Roller Type Micro Switch:110"/3-pole Connector set (Black color) and processed to the same color and etc. Spec. as OEM. (Please make sure the Switch is working!)
How was your experience with it?
In the description field. It won't be as light as the 24mm Ratio, but lighter than the Normal." I couldn't see any change in the ZX-6R because of its AssistSlippers mechanism, which makes it very light even with the OEM clutch. However, I felt that the clutch was sharper and lighter than the OEM, which I may experience during long distance touring and city driving in traffic. 。
[Others]
Holder color was selected as no option. The color is not the same as brembo19RCS Master Cylinder, but it is close enough. Also, the RCS OEM clutch lever replacement and sticker will further enhance the compatibility.
View detail
Fits: Others
In conjunction with the brembo RCSMASTER conversion
I changed the brake to brembo rCS and also changed the clutch side to this.
As for the lightness of the clutch, the honest truth is that I don't know the difference because it is originally a light MONKEY125. In the future, when the engine is modified and replaced with a Reinforced Clutch, there may be a difference.
It looks like the color of Anodized is a little different due to the difference in material? It is not enough to be concerned about.
I like it because it gives a sense of unity around the Handlebar.
Short lever is chosen because it is a MONKEY lever, and finger 1 - Quantity:It is claimed to be for 2pc seating, but it is about the same as a normal short lever, so operability is not a problem.
The adjustment is easy to handle with Dial type, and the switch is attached, so it can be installed without a problem if you can connect the electrical system.
It's a good product if you can look past the high price.
View detail
Fits: Others
To become light
Changed the brake side to brembo, it is much lighter than OEM. View detail
Well made, look good
I recommend this product and would buy again, superior to other brands. I would have liked to use bearings or some high-cost detail ... since it is not very económica. View detail
Fits: Others
The width of Clutch meat widens → Long time to grab → Tired of hands → get used to → ask what you bought for yourself
L29 (Short lever) Although it is a feeling of use, it is honestly subtle. Besides the events of the general comment, the cause of exhaustion is Lever too thick, I think that it is also in the position to put your finger, but even though thoughtfully mistaken, I gave up because it is Wire drawing after all. I did not match Mini bike. Also there is hang in the installation of Lever side Wire Stopper (Although it is written in the Instruction Manual, it is insufficient, Pivot gets little by little as you make Lever outwardly and it can be laid out Line).
Self-assured world of parentheses only (I should have done to Berlin).
I got caught on the top of the Lever part with kohken, and wanted to make it the simple is best, unnecessary thing.
View detail
Fits: Others
Since it is a high product, let's buy it after seeing the real thing
Large Light weight, rigid feeling, no wobble, smooth operation. The color of Lever holder was settled in Titanium, I liked Large. However, Small scratches are seen in Lever and Black of Adjuster, and politeness is not felt in the assembly of Aluminum, Jura. Consumers will be worried about this kind of things. View detail