Reviews
Fits: HONDA MONKEY125, HONDA CT125, HONDA GROM, HONDA MONKEY125ThailandMODEL, HONDA DAX125, HONDA CROSSCUB110
Bracket painted ….
InstallationInstruction Manual is difficult to understand, but it is easy to understandQuantity:Pair (for Left and Right) Be careful not to make the mistake of
The painting of the mounting Bracket is Quantity:Pair (for Left and Right) I was also bald. Rather than sayQuantity:Pair (for Left and Right) I think it might have been better to say "I was able to turn it over. It's a pity.
View detail
![[Goggles] ARMEGA](https://img.webike-cdn.net/catalogue/images/102307/0000000018392_A26yT2r_TS.jpg)
It is cool and has good visibility.
The road surface can be seen clearly regardless of weather conditions, except when the sun in the west is harsh.
The effect of reducing glare seems to be Large, and there were times when I felt it was difficult to see when the sun went down, such as when it was cloudy.
View detail
as necessary
This is the purchase of consumables that are included with the exclusive product.
There is also a Dirt run, and I was a little concerned about the Chain coming off, so I bought it.
View detail
I like that it's already processed.
I bought it because it is already machined for Casting wheel. View detail
Fits: KAWASAKI Z1000 (water-cooled)
I bought it...
I finally got my hands on Wheel!
And in Marchesini!
At first I was thinking about GALE SPEED or OZ RACING.
Over the past year, Wheel has gone up in price considerably and Gale has lost its value for money.
OZ RACING has become more expensive than Marchesini
470,000 yen for standard Anodized Color, 550,000 yen for Paint
Too expensive.
Marchesini the King in his own value system, the nobleman OZ
I felt like a commoner GALE SPEED.
If they undercut that and the price exceeds Marchesini's, I'd choose Marchesini.
And GALE SPEED's Brand power is inevitably weak compared to other niManufacturers.
Add $140,000 to Gail's GP1S and you'll be promoted to Marchesini.
That Marchesini didn't like 7 Spokes at first and shunned it.
See, 360 degrees around the circle is not divisible by 7.
This means that somewhere out of the seven, there is a disproportionate etc.
It's kind of creepy, isn't it?
The price and design lightly erase such thoughts, a lack of conviction.
As a result, I chose Marchesini's M7RS over Gale and OZ.
Review from here
I knew it was lightweight, but when you actually ride it, it changes more than you can imagine.
The forging and thin Rim make the GYRO effect much weaker.
It feels like the head goes in and falls down without the action of bending it.
It's so light that I'm afraid it's going to fall over as it is.
To be honest, I've seen a lot of these reviews and sometimes I wondered how they could change like that.
I can feel the difference when I feel it. Even I, an insensitive person, can feel the difference so far, so I guess normal people can see the difference, can't they?
There's Merit, of course, but there's also the downside of the lighter weight and reduced GYRO effect.
First of all, straight line stability is reduced, if not to the point of dizzying.
I get the sense that there's something unsettling about it.
I wonder if it is noticeable when the speed exceeds 100 km/h.
Also, Small Gap is transmitted as vibration.
This is thought to be due to the fact that the lighter weight is not fully absorbed and transmitted.
Maybe once you get used to this area, you won't mind.
Also, I've seen a few reviews here and there that say it's often springy.
I think I can solve the Large one by setting up the suspension.
The place where the Wheel was installed has various know-hows and
I didn't have the feeling that I'd be hosed if they did the Setup for now.
It looks good, performs well, and you won't regret buying it.
I myself bought it 80% on looks, so it's unlikely to be effective.
I think it is very effective Large for people who drive fast and furious on mountain roads.
View detail
For dress-up purposes.
[How is it used? Touring Sometimes I want to go into the mountains.
Was the one you received as per Image? Yes, it is neither large nor small.
Was the installation difficult? Very easy.
How was your experience with it? It's spring and the weather is nice, so I don't feel the effect of windproofing etc., but it looks better! 。
[Included Parts:were they on? Mounting Bolt
[Was there anything that disappointed you? There is none
Other items that would be helpful
Since the Armour Hand Guard Bend was originally installed first, it naturally fits perfectly.
We will go into the mountains and see if this works.
View detail
Stability only possible with Fat bar
This is a Review at least 6 months after purchase.
Quantity:Pair (for Left and Right) Fell multiple times on Tarmac in (SlipDown type) were, but there are no visible signs of breakage or bending, and the feel of the product remains the same.
The length of the bar is 800mm, which may be a little too large for some Japanese, perhaps due in part to the length adapted to the physique of Westerners. I use it with the bar packed.
Motocross athletes often use them without filling them these days, so if you take that into account, you can use them without any particular concerns.
View detail
Easy to install
To begin with, I bought it for replacement for an OEM that looks rusted and battered.
The product itself can be installed without any difficulty, but I tried to replace the stud bolt because it was a good opportunity,
It still broke and Shop took care of it.
I am happy with the way it looks and the way it is attached to my car.
The most important thing is the effect, but I have run about 30 km and I don't feel it….
When you say it, it is like a smooth Speed ride.
Scattered bells could not be heard.
This time, I am satisfied because the appearance is important to me.
View detail
Thinnest lock nut known
The change lever of Babyface is divided into two parts, and the Flat Cap Boltm6 12mm is tightened by Screw lock+tightening the specified Torque.:2pc. The set was used to connect the two, but because it came off while driving, we thought it would be best to use a double nut to stop the nut, so we installed a longer 20mm nut than the 12mm nut that would be used for the double nut to fix the set.
This Nut is as thin as 4mm and with Lock.
It cannot be Torqueed strongly, but it is a very effective product.
Is it expensive?
View detail
Fits: YAMAHA YZ125, YAMAHA YZF250, YAMAHA YZF450 10-16, YAMAHA YZ250 15-16
Firmly fixable
I purchased this product to renew my Number Seal.
The lower part is fixed to the fork, and the upper part is fixed to the screw and tie wrap, so it can be used as it looks.
I don't mind it because I use it for competitions, but if you are a city rider, you may be dissatisfied with the price because there were some parts that had a little bit of bali.
The sticker is a small manufacturer's logo and is included in the package,
The Fork fixing part was a Spec. that was attached from the beginning.
View detail
Quality is poor for the price.
It is a reasonable price, but I don't think the quality is good. There were welding spatters all over, BALI all over the part where the Bolt is inserted, and even scraps from cutting the Screw. View detail
Many color variations available
A wide variety of color variations are available, making it easy to match the color of the car body.
The price was inexpensive and helpful.
The texture is perfect.
View detail
Pretty good
I used this Inner ShirtsQuantity in a leather jacket in early spring temperatures around 12 degrees Celsius.:Just 1 pc. was enough. View detail
Optimal solution for Alpinestars racing boots
I used to use smx-6 plus, but once I put them on, the feeling of operation was good, but when I put them on, I had to tighten the Inner laces and Fastener with the Ratchet, so it took a long time and I was sweaty before putting them on in the Circuit in midsummer. I stopped using them because they were too much trouble.
Also, there were Briefsing and MachineCheck before the run, so there was a sense of urgency about the time.
These Boots are easy to put on and take off with just a Fastener and Magic tape.
However, the protection is not significantly inferior to the original.
The Boots themselves are also soft, lightweight, and easy to operate.
I thought supertech-r was unnecessary unless you are a top racer.
The size feeling was JUST 43 in my case with 27cm leather shoes.
View detail
Only special tools can do this.
In order to revive the immobilized YamahaRZ350, I set out to overhaul it, but the Pulley remover I had on hand was not enough to get the job done. I knew the power of the special tool from my previous experience of removing a bicycle without a co-sauce, so I searched for it and found this YamahaOEM tool at a reasonable price. The feeling is that there is no rattling, and I can put a lot of power into it. However, it didn't shake, probably because it was an old motorcycle, so I applied more force with the Expander and was able to remove it safely. There was no sign of overworking the tool, and I am glad I purchased it. View detail
This is the only m6Lock nut that is thin.
The change lever of Babyface is divided into two parts, and the Flat Cap Boltm612mm is tightened by Screw lock+tightening the specified Torque.:2pc. The set was used to connect the two, but since it came off while driving, we thought it would be best to use double nut fasteners, so we used the included 12mm to make the reverse side of the lever tight, so we used the longer 20mm to penetrate and installed this product.
Nut texture is good.
As far as I know, this is the only thin 4mm of m6Nut.
But it would help if it were a little cheaper.
View detail
like a typical (e.g. of a woman)
I got my wish and installed it.
It is more solidly built than it looks and seems to be able to withstand Tie Down austerity.
This bracket is more suitable for the GSX-R than the Tandem Footpeg.
The Instruction Manual is also easy to understand, and I don't think the installation will be confusing.
View detail
High quality!
I was looking for a Round Type with the same Image as the OEM and found this product.
The Mirror is a small size, but visibility was not a problem.
The mirror is too small to be inspected.
View detail
It does not require processing. The lid is a bit ….
The USB power supply can be removed very easily if you don't feel the need to remove the front parts, which are the face of the motorcycle. If you don't feel that removing the front parts and drilling holes in the body is too much work, you can take out the USB power supply very easily.
It is not difficult if you have a set of tools used for maintenance. Drilling was done halfway using a plastic cutter, Nipper, and File.
Wiring is completed by simply joining the existing Connector, which is the quintessential OEMAttachment.
It is also helpful to be able to download the illustrated Instruction Manual.
Material for Waterproof:It has a rubber lid, but the fit is squishy and unreliable, and it hits a nearby screw when closed, so it's not great here.
Aside from the amount of work and quality, I wonder if the most appealing feature of the Large is the ability to take out the USB power supply without any wiring process.
For reference, it took about 2~3 hours to do the work by hand.
View detail
The shape and reflection are fine, but ...
This is a comparison with AZMirror made by Tanax.
The first TANA-X AZMirror I installed was too small, and the second was too small.
I replaced them because they became difficult to see due to vibration while driving at high speeds.
It looks just like the Image and was not difficult to install,
After installing the lens, I tried riding it and found that the reflection was at the ideal large size,
It is less sensitive to vibration than AZMirror and easier to see.
Unfortunately, there is no Rubber between the Mirror section and the Body,
AZMirror was better in detail where Mirror's cut surfaces were visible.
Except for that part, Hi-Viz Mirror is better in terms of performance,
I am satisfied because this is a safer way to drive while driving.
View detail