Reviews
Fits: HONDA monkey, HONDA CB400 Fore (air-cooled), HONDA monkey, HONDA CB400 Fore (air-cooled)
Great valve covers
Nice way to help add cooling fins to the honda air cooled engines, and help dress up the motor a little more, fitted to a honda Monkey Z50 View detail
Expensive but high quality products
Matching with the fins of Engine is a good product.
It adds a sense of luxury to the exterior.
Fitting is fine and easy to work with.
It is a product that is a bit expensive and difficult to afford.
The texture is commensurate with the price, though.
View detail
I wanted this one. (a bit expensive).
The Yamaha Bolt OEM Engine and Crank Case Cover have a somewhat unfortunate appearance. (Especially, two small ones in the Right Side are urethane) I purchased this Cover.
The design of Bolt V TWINEngine waist is so wonderful that the design of the Normal cover is a waste or something.
The delivery time was about 3 months. When I placed the order, I expected it to take more than 4 months, so it arrived about a month early.
The color of this Cover is pure Black, and the BoltEngine color is a bit Color:It is a Grayish Black, so it is not the same color, but, well, it blends in nicely.
Damper on the Normal cover behind the Largeest cover on the Left Side. (Sponge) is attached with Double-sided Tape (Photo:5,6)。
The KIJIMA Cover does not come with a similar damper (see photo).:5), Just in case, Yamaha OEMDamper was attached to KIJIMA-made (Photo:6)。
Yamaha OEMDamper、PartsNumber:5S7-1542A-00, $350.
To install, remove the three Normal covers and install the original Bolt (3 Covers all M4, hexagonal) It only takes 10 minutes to install with
No Gasket or Seal agent is required.
When considering the purchase of this Cover, Material:I also searched overseas sites to see if there was a less expensive cover in aluminum. I also searched overseas sites.
I was worried about the medium and small covers in the European site, because there were some American style SKULL Helmet, cross design, and plain ones, but I found 3 quantities.:There were no set items available, and purchasing three single items was more expensive than KIJIMA's, including shipping costs, and I was concerned about the quality. (I also liked the content of the Web!ke Review.) 。
Even the back of the Cover is beautifully made and carefully finished. I am satisfied with the quality.
View detail
CHALY
Thanks for the fast shipping!
The bees are looking good.
View detail
Fits: HONDA monkey, HONDA CB400 Fore (air-cooled), HONDA monkey, HONDA CB400 Fore (air-cooled)
The finish was rougher than I expected...
Like the billet cam cover installed at the same time, it is a custom looking part.
Strictly speaking, the larger surface area may contribute to a slight increase in cooling efficiency.
There were Plating Specification and BarrelSpec. so I chose BarrelSpec. to be less conspicuous.
Plating would have been better anyway...
I thought it was conscientious that the O-Ring was included, as expected of KIJIMA.
But the finishing touches on the all-important product are nowhere near as good as they should be.
Quantity:2pc. Of the set, 1pc. had a rough surface on the hexagonal part.
This is a bit disappointing. But considering the price, maybe this is what it is.
View detail
Fits: HONDA monkey, HONDA CB400 Fore (air-cooled), HONDA monkey, HONDA CB400 Fore (air-cooled)
Restore&Refresh
The MONKEY Restore was too dirty and leaking oil, and I wanted to improve its performance.
It reminded me of the time when everyone used to use aluminum washcloths on the air cooling fins to dissipate heat.
From a performance standpoint, would it be good to have more area to dissipate heat?
I used a LaserThermometer to measure the level, and the results were 2 to 5 degrees lower than before I installed it. (It's a cheap product, so it's just a rough estimate.)
Since it's January and the air-cooled engine cools down quickly when the engine is stopped, I don't think this is really necessary now, but it will be effective in the summer when the engine is on the verge of overheating.
For the basic Overheat solution, it would be better to change the Oil viscosity from XXW-40 to XXW-50 or XXW-60, but I thought it would be effective as an insurance against heat dripping when I felt like this.
It's also cheaper and more wallet-friendly to try it out before adding the oil cooler.
By the way, I was working with O-ring, so I was able to kill two birds with one stone since I was working with the oil leak.
In my case, it's a MONKEY, but if it comes with a CUB Leg shield, the Leg shield will give you a Large wind effect, and the performance will be more Large.
Tappet adjustment can also be done by hand immediately after the Cap is loosened.
View detail
Buy it.
These covers are easy to install and look great. The silver colored accent lines on the covers compliment the accent lines on the cylinders.They are made of metal not plastic. Packaged well for shipping. I would recommend this item. View detail
Price is high
Although it was also in the evaluation of the other person, I feel that the price is high. However, the texture is satisfied well compared with NORMAL. Although it was a personal impression, I felt that it might be a bit more Matte feeling. View detail
Too expensive.
It's too expensive as Dress-up parts.
But, NORMAL's Engine Parts is coated with resin and Tohoho specimen with perfect iron plate..
I understand that it is counter measure, but air-cooled TWIN looks like everything.
The vehicle to be compared with per terre poster.
I assure you, the performance is definitely above. And it makes me laugh and overwhelmingly.
Feeling like a gliding while feeling a heartbeat.
Tranque feel like connecting anything.
Stability that does not even feel like a mossy sign.
Still it is less strange habits for Handling.
You can tell if you get on goodness with a single shot, but if you change your way of saying you can say that you do not know without a ride.
It is good or bad Japanese car.
Again, air-cooled TWIN looks all out.
This is a complementary part of the part where designers drank tears in Reduction in cost.
It is a thing for returning to original Design which should exist.
It is a hardship plan to fight with Manufacturer of certain United States.
People who understand Bolt's goodness think that there is no loss even if you buy it,
At least, if it is about 20,000 it is a full mark.
View detail
High but good
I thought that I wanted someday before, but since KIJIMA's person was out of stock for a while and seemed to have arrived this time, it arrived immediately.
OEM's Cover is only Left Side generator, Silver's soon to rust, iron and cloth and point of Right Side were both plastics made cheap, so this Finned Design Material : I am satisfied with AluminumBlack Finishing!
If you install Hexagonal Wrench, I think that anyone can easily do it if you work while watching the manual if you have Hexagonal Wrench.
However, it is disappointing that the price is expensive and there is no other color and Design Variation (T_T)
Personally I felt that it looks better as Parenthesis looks because Engine Fin's and Balance of this Cover are well taken.
View detail
Excellent compatibility with Engine fin
Installation can be done as long as 20 minutes.
Personally, I think that Matte Black was in good condition, but from the color of Engine part I think that this color is matched.
Moreover, I think that Design is also made considering the appearance with Engine fin.
Although I do not know the durability at the moment, it is a reliable Manufacturer and I am solidly making it.
It seems like a Custom with only exterior appearance, but as the surface of the Cover becomes wavy, the surface area increases and you may expect a heat dissipation effect.
I think Impact looks stronger, so I'm glad I changed.
However, if the price is 2 / It is the best if it is about 3.
View detail
Fits: HONDA monkey, HONDA CB400 Fore (air-cooled), HONDA monkey, HONDA CB400 Fore (air-cooled)
MONKEYDress-up
I like designs that are no different from those days.
I did not know that this Parts is still there. I was looking for it in Yahoo auction but it is too expensive, there is distortion due to heat, there is a problem. A brand new is good. I'm happy with Rubber packing.
View detail
Fits: HONDA monkey, HONDA CB400 Fore (air-cooled), HONDA monkey, HONDA CB400 Fore (air-cooled)
I am satisfied..
Buy if you think that you can contribute to cooling the Head. I think that CUB is efficiently cooled by the amount of Leg shield, so I think Parts heard of Small skill will be made use of. I do not compare with Oil cooler, but I'm looking forward to cooling from the fins when driving. View detail
Fits: HONDA monkey, HONDA CB400 Fore (air-cooled), HONDA monkey, HONDA CB400 Fore (air-cooled)
It is far, and although what is necessary is just to see, it is dramatically regrettable, if it approaches since structure is coarse. although only a few was repaired by itself -- mind -- since it was all likely to try to correct a place, or it was li
It is far, and although what is necessary is just to see, it is dramatically regrettable, if it approaches since structure is coarse.
although only a few was repaired by itself -- mind -- since it was all likely to try to correct a place, or it was likely to become and time was likely to be taken, it gave up.
View detail