Reviews
Fits: KAWASAKI NINJA400, KAWASAKI NINJA650, YAMAHA CYGNUS X, YAMAHA CYGNUS X SR, YAMAHA DRAGSTAR250, YAMAHA YZFR3, YAMAHA YZF-R25, YAMAHA YZ65, YAMAHA YZ80, YAMAHA YZ85, YAMAHA YZ450FX, YAMAHA YZ250X, YAMAHA YZ426F, YAMAHA YZ250F, YAMAHA MAJESTY, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA XT250
Large satisfied
I have been asked by my daughter for a long time, but due to the severe cold weather this year, I bought it. (Scooter) So I had a hard time removing the cowl, but I am Large satisfied with the contents of the product. I have several other motorcycles, so I plan to purchase & install them one after another. I think it is very cost effective! View detail
Fits: HONDA CT125 HUNTER CUB, HONDA , HONDA CT125 CT110 HUNTER CUB, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125
I should have put it on sooner.
It was warmer than I expected and I regretted not putting it on sooner.
The installation was not too difficult since I had studied the installation with the help of videos and other resources.
Blinker and Headlight are LEDs, but the voltmeter shows that the voltage drops considerably while idling, so it seems that urban areas with many traffic lights will have a large battery load.
Large seems to be sturdy as it is stable around 13.8 while running
Combined with the electric Gloves, the morning commute will be much more comfortable!
View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA650, YAMAHA CYGNUS X, YAMAHA CYGNUS X SR, YAMAHA DRAGSTAR250, YAMAHA YZFR3, YAMAHA YZF-R25, YAMAHA YZ65, YAMAHA YZ80, YAMAHA YZ85, YAMAHA YZ450FX, YAMAHA YZ250X, YAMAHA YZ426F, YAMAHA YZ250F, YAMAHA MAJESTY, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA XT250
KIJIMAGrip heaterGH08Push Switch
It's been about two weeks since I installed it and so far no problems.
The Grip is a little thicker than I expected, but it is just right for me. I was thinking that I would mishandle the Switch if I used the type attached to the Grip, so I chose this type, and it was the right choice. It is easy to operate and I feel it is convenient to attach it anywhere I want. Also, my palms are quite warm if it is 4 degrees Celsius in the morning and the temperature is at the maximum. But only my fingertips are hard to keep warm. If you want to keep it on all the time, I think the 3rd or 4th of 5 levels would be best. I think the 3rd or 4th out of 5 levels would be best if you want to wear it all the time.
Electrothermal Gloves or Inner Electrothermal Gloves (You will need to bring your own Gloves separately) Would it be good to have a And.
With the skin Gloves with boa, the palms will feel sweaty.
View detail
Fits: HARLEY-DAVIDSON Electra Glide Electra Glide FLH, HONDA VT750, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA XV1600WILD STAR, YAMAHA BOLT, KAWASAKI VULCAN DRIFTER400, KAWASAKI VULCAN900 CLASSIC400, KAWASAKI VULCAN800 CLASSIC, KAWASAKI VULCAN800 DRIFTER, KAWASAKI VULCAN800, KAWASAKI VULCAN400II, KAWASAKI VULCAN400, SUZUKI BOULEVARDC50, SUZUKI BOULEVARDC50, KAWASAKI VL800, SUZUKI Intruder Classic400, SUZUKI M109R
Fast delivery and good product
I received the product in good condition. Above all, thank you for sending me a product of low price and good quality.
It hasn't been installed yet, but the quality looks good and I think I'll be able to spend this winter without worrying about my hands.
It's nice to be able to buy it much cheaper than buying it domestically.
Please continue to supply good products at low prices in the future ------------------------------------------ ---------------- I received the product well. It's still mounted, but it looks good quality and I think I can spend my hands in this winter. It is good to buy more cheaper than purchasing in Korea. Please continue to supply good products inexpensive in the future Powered by Google Translator
View detail
Fits: HONDA CT125 HUNTER CUB, HONDA , HONDA CT125 CT110 HUNTER CUB, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125
Reliable Items for Winter
[How is it used?
I wanted to equip the vehicle I was using for mountain activities with a hot grip because my tolerance for cold is gradually weakening as I age, and I know that endurance is not good for my health. Cheap and reliable." When we were looking for a new model, we found the GH04, which was an old product before the model change, on sale at a Motorcycle store in the prefecture.
Was the one you received as per Image?
I wanted a model with the Switch integrated into the Grip, but the low price was just too tempting...
This product was a MODEL that a friend of mine used before, so it was very familiar to me, just like the Image.
Was the installation difficult?
It's like a normal Grip replacement + electrical Wiring work. Difficulty." is not so high, but "Cumbersome." Is it a task that is not a task?
In my case, it was relatively easy because it was a Dual PurPass vehicle, but if it is a Full Cowl Motorcycle, it may be more time-consuming to remove and install the exterior cowl.
How was your experience with it?
If you put in a separate switch when you start the Engine and set the desired temperature, it will start warming up rather quickly.
[Included Parts:were they on?
GripThis product + Wiring/Interrupt terminal, etc. can be installed only with this product, unless the vehicle is very special.
[Was there anything that disappointed you?
The Grip is thicker if you compare it to the latest products, but if you don't mind that, you will not be disappointed.
Other items that would be helpful
Point and hang of installation
The universal design makes the wiring quite long, so you can either cut it off to adjust the length or hide it in an inconspicuous location on the vehicle.
Wiring on the Axel side should be handled with a margin assuming that Throttle is running.
I guess the installation hang is to read the Instruction Manual carefully, even if it is tedious.
[Availability and clarity of the Instruction Manual
As mentioned above, Instruction Manual is available.
The contents are illustrated and easy to understand.
[Notes]
If the power is turned on incorrectly, the power will be left on all the time, which may cause a battery buildup.
Let me repeat that. Difficulty." However, if you work without knowledge and without reading the Instruction Manual carefully, you may cause the above-mentioned trouble.
If you are not confident, ask a PRO store or a knowledgeable and reliable friend.
Items to be purchased together
If you don't care much about the appearance, you can use the Handlebar Cover with the Quantity:If attached as a set COTA'd around the Grip. and comfort is increased several notches.
Many vehicles in this condition are used during the winter season by those who use Motorcycle for commuting and long touring.
[Opinions and requests to Manufacturer
Please continue to evolve in the direction of greater comfort.
View detail
Fits: HONDA CT125 HUNTER CUB, HONDA , HONDA CT125 CT110 HUNTER CUB, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125
Should have installed it sooner!
I chose Grip heater because of its low price, but there was an unexpected Merit.
The combination of a grip heater and a handlebar cover is a standard custom of Scooter's Grip heater.
As for the recently popular Grip heater, it seems to be easy to use with the switch attached to the Grip, but if the Handlebar Cover is attached, the Indicator cannot be seen.
In that respect, I felt that the Grip heater, which is a Grip separate body type, is not bad.
However, because it feels slightly thicker, we recommend that you choose GH10 if you want to use the slimmest Grip possible.
In addition, Throttle requires processing, so a certain level of equipment and skill is required.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200 DAEG, KAWASAKI ZR-7S, KAWASAKI ZEPHYR X, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900, KAWASAKI Z750S, KAWASAKI Z750, KAWASAKI Z250, KAWASAKI Z H2, KAWASAKI Z1000, KAWASAKI Z H2 SE
I couldn't stand the cold.
SR400 seems to have a small battery and I didn't want to burden it, so I didn't install it before, but I couldn't stand the cold and bought it. View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA650, YAMAHA CYGNUS X, YAMAHA CYGNUS X SR, YAMAHA DRAGSTAR250, YAMAHA YZFR3, YAMAHA YZF-R25, YAMAHA YZ65, YAMAHA YZ80, YAMAHA YZ85, YAMAHA YZ450FX, YAMAHA YZ250X, YAMAHA YZ426F, YAMAHA YZ250F, YAMAHA MAJESTY, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA XT250
Standard Grip heater
KIJIMA's Grip heater is a standard item, but this is the first time I have purchased one. Until now, I have been using DAYTONA products. The quality was not that different from that of DAYTONA.
The shape of the Wiring Connector, and whether the Grip has a core or not?
I think the Grip is the same thickness and quite thin.
I think the length from the cord coming from the Grip and Switch to the Connector is too short for a Handlebar Up Type Motorcycle. It is necessary to be creative in handling.
There is a 2x price difference between a separate Switch and an integrated Switch. I hope the integrated type is a little cheaper.
View detail
Fits: HONDA CT125 HUNTER CUB, HONDA , HONDA CT125 CT110 HUNTER CUB, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125
Grip heater on this winter
CT110 HUNTER CUB (length:115mm) with a handlebar cover.
The GH10's built-in switch is not visible inside the cover, but the GH10 has a push-switch that comes out of the handlebar cover, making it easy to switch temperatures.
View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA650, YAMAHA CYGNUS X, YAMAHA CYGNUS X SR, YAMAHA DRAGSTAR250, YAMAHA YZFR3, YAMAHA YZF-R25, YAMAHA YZ65, YAMAHA YZ80, YAMAHA YZ85, YAMAHA YZ450FX, YAMAHA YZ250X, YAMAHA YZ426F, YAMAHA YZ250F, YAMAHA MAJESTY, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA XT250
Satisfied ( ??? )
This is my first time installing a Grip heater and it works great!
As stated in the instruction manual, it would be easier to insert the Throttle side if it is warmed and softened once when the Grip is installed.
In my case, I had to shave the Throttle sleeve with File. I thought that if I shaved a little, it would fit, but I had to shave it until it was almost smooth to fit.
Mounted with heat-resistant Grip bond.
It's about 10 degrees Celsius outside and with winter gloves, Level 4 is warm enough. This was a good buy!
View detail
Fits: HONDA CT125 HUNTER CUB, HONDA , HONDA CT125 CT110 HUNTER CUB, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125
Say goodbye to cold fingers
It is one of the indispensable Items in midwinter equipment.
I was wondering about the integrated Switch.
For use with Handlebar Cover
Switch separate body. And it's visible.
The price was also a deciding factor.
The installation itself is not difficult, but it depends on the car model.
I think it will change.
Now you have the perfect COTA twin use!
View detail
Fits: HONDA CT125 HUNTER CUB, HONDA , HONDA CT125 CT110 HUNTER CUB, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125
warm and good feel hand grips
I took few hours for installed this on my NC750X and i need to bought the glue because there was no glue included. I only used this heated grips with bare hands when motorcycle is in idle speed yet and i can feel it getting warm but not hot. I expect it will more hot when i use more engine rpm. View detail
Fits: HONDA CT125 HUNTER CUB, HONDA , HONDA CT125 CT110 HUNTER CUB, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125
Good item
It's a little thicker than a pure grip, but I don't think it' It's very warm. I just hope it doesn't break down for a long time. View detail
Fits: HONDA CT125 HUNTER CUB, HONDA , HONDA CT125 CT110 HUNTER CUB, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125
After using it for a year, I bought more because of its reliability and good usability.
I bought this one again for my KTM.
https://imp.webike.net/article/461248/
I'm not sure if this is a good idea or not, but if it's a good idea, I'm not sure if it's a good idea or not, but if it's a good idea, I'm not sure if it's a good idea or not.
KTM's Grip is Quantity:Pair (for Left and Right) The length is different so I made it 115mm to fit the shorter Clutch Side, but the increase is Quantity:Pair (for Left and Right) It's the same, but this time I went with 120mm.
The installation, impressions, etc. will be updated separately again after using it for a while!
View detail
Fits: HONDA CT125 HUNTER CUB, HONDA , HONDA CT125 CT110 HUNTER CUB, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125
It's a cold weather necessity!
[How is it used?
Installed on SEROW250. The Grip heater was installed on the previous motorcycle, so it was a good idea to install the Grip heater in cold weather.
I knew how comfortable it was, so I installed it again.
Was the one you received as per Image?
The Grip Design is good and looks cool. You can also adjust the temperature.
How was your experience with it?
The Grip heater I used on my last motorcycle had a thicker grip, but I was able to get it to work.
Now the Grip heater is thinner so the Grip is easier to grip.
The temperature depends on the outside temperature, but it is warm enough.
[Points to note]
The inner diameter of the Grip is too small to fit in the Handlebar.
So, turn on the power and set the temperature to the most Large to warm it up, and it will be easier to enter.
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
You can use Relay for Grip heater and other electrical components.
View detail
Fits: HONDA CT125 HUNTER CUB, HONDA , HONDA CT125 CT110 HUNTER CUB, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125
Towards Winter
I bought this for the winter.
I haven't tried it yet, but the installation itself wasn't difficult.
View detail
Fits: HONDA CT125 HUNTER CUB, HONDA , HONDA CT125 CT110 HUNTER CUB, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125
It's warm!
Installation is totally easy.
It was too cold to put it on, but Grip was thin and unexpectedly warm without feeling uncomfortable, and Large was satisfied!
View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA650, YAMAHA CYGNUS X, YAMAHA CYGNUS X SR, YAMAHA DRAGSTAR250, YAMAHA YZFR3, YAMAHA YZF-R25, YAMAHA YZ65, YAMAHA YZ80, YAMAHA YZ85, YAMAHA YZ450FX, YAMAHA YZ250X, YAMAHA YZ426F, YAMAHA YZ250F, YAMAHA MAJESTY, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA XT250
Cospar good
OEMOption's Grip heater failed.
I was looking for an inexpensive Grip heater because I use it with Handlebar for Grip heater and I only use it in winter and it costs less than 20,000 yen for parts.
It is not as warm as the OEMOption product, but it is within the practical range. The price is very reasonable.
It's easy to install, and in the summer when it's not in use, just wrap the insulating tape around the Coupler on the car body side and hide it behind the Screen for refreshing.
View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA650, YAMAHA CYGNUS X, YAMAHA CYGNUS X SR, YAMAHA DRAGSTAR250, YAMAHA YZFR3, YAMAHA YZF-R25, YAMAHA YZ65, YAMAHA YZ80, YAMAHA YZ85, YAMAHA YZ450FX, YAMAHA YZ250X, YAMAHA YZ426F, YAMAHA YZ250F, YAMAHA MAJESTY, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA XT250
Comfortable in winter! I'm not cold!
I put a Knuckle guard on my CROSS CUB and also installed a Grip heater. the OEM accelerator grip has a convexity, so I recommend to use the heater only! I shaved it ^_^.
Even with thin gloves, the Large is durable? Comfortable?
View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA650, YAMAHA CYGNUS X, YAMAHA CYGNUS X SR, YAMAHA DRAGSTAR250, YAMAHA YZFR3, YAMAHA YZF-R25, YAMAHA YZ65, YAMAHA YZ80, YAMAHA YZ85, YAMAHA YZ450FX, YAMAHA YZ250X, YAMAHA YZ426F, YAMAHA YZ250F, YAMAHA MAJESTY, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA XT250
Best in cost and quality.
I used to use a Handlebar Cover but I wanted a Grip Heater.... So I installed KIJIMA's switch separate type grip heater GH08 120mm. (I used the previous model GH04 on my CBR1000F for about 10 years with no problem)
At the same time, I replaced the cone with a CF POSH:Flat face throttle cone to make it 8% High Solo, and I can kill two birds with one stone by not having to process the OEM cone.
The power supply is taken out from the StopLight night light line (looks like Blue) under Seat by using Emon Y-Type Connection Terminal for Bullet Type Terminal.
SR is easy to do. Friendly design? I think so.
Wiring is to refer to Net, and all Coupler connections except for the power supply are done in Headlight, and wiring is done to each place.
The waterproofing is good and the work is easy to understand and I recommend it.
Once you have removed all the Couplers from the KIJIMAGrip heater, you can start working on it.
Operation Switch is like ManufacturerOEM and satisfied. Precision Driver is required for installation.
The trial run was carried out in 8°C sunny and sometimes cloudy weather.
I did the first 30 minutes with summer gloves and the first hour with winter gloves. (I didn't wear Handlebar Cover)
Even with the summer Gloves, I feel like I can endure Level 4 out of 5 (the fingers on the back of my hand get a little cold?). But in winter Gloves, I never get cold!
If you also take operability into consideration, you'll want something with an intermediate thickness. It is a luxurious trouble.
The work time is about 4~5 hours while taking pictures.
Installation details:https://imp.webike.net/diary/209437/
View detail