Reviews
Style is a no-brainer! Price is Neck
I like it here.
The product design and accuracy is 5 stars without any complaints.
The Number angle is common sense and not too naughty, which is what I like.
You can install it with Bolt On without cutting the OEM Coupler, so it is easy to return to OEM.
The dedicated Axle Block is a high point for me personally.
Other companies' Fender Eliminator Kit has a big color for Axle Block.
I think that's a little bit.
It is necessary to devise it because it hides a little depending on Blinker.
[Not so good here.
High price
It is 5,000 yen to 10,000 yen more expensive than other companies, but it does not require processing. Bolt On and Axle Block is included.
I think the quality is worth the price.
[I wish you'd do this.
Some processing was required for the tail cowl (I cut it down a little with Cutter)
I think I didn't put this together right.
but I'm stating it because I think Active should know if anyone else has cut it as well.
I want you to upload the installation video to youtube.
Nowadays, it is commonplace to watch installation videos on Net.
Other companies put out videos of the entire process, which was very helpful.
Active, please consider this in the future.
View detail
Installation is a pain and Blinker Wiring is tight.
It's a little cheap.
The gap between the Blinker's Wiring is narrow and oppressive.
The stop-lamp wobbled a bit and the fit was not so good.
I guess it's an old product.
View detail
I recommend the Fender Eliminator!
I bought it from WehBig through their physical store and had it installed in time for delivery!
I always install Fender Eliminator's made by Active!
I'm pretty happy with the texture and finish of Bracket!
View detail
Refreshing the buttocks
There are a lot of manufacturers, but I prefer the one that is a little further back than the tail lamp, so I decided to go with Active's. The easy to understand replacement procedure on the net was also a deciding factor, and I was able to replace it in about 2 hours, thanks! View detail
not very good
The long tail is a curious exchange.
The installation itself was painless, but it would have been better if there was a Seal to hide the OEM holes.
I'm particularly concerned about the square hole in the Center, so I'm going to buy a Rubber plate and sandwich it in.
View detail
Fender Eliminator is the basis of Custom
I use it on my KATANA which I co-own with my brother. We absolutely prefer the Fender Eliminator which is Refreshing around the Rear and is the basis of Custom. In the beginning, my brother was opposed to Fender Eliminator, but (We take turns storing the car in our garage and in my brother's garage for a month at a time) We exchanged it on our own during our deposit period. However, I was relieved because my brother who saw the actual thing liked it unexpectedly. View detail
Japanese Vehicle Inspection Correspondence in Stylish
It was attached to a cbr1000rr that I got from a friend at a discount price, and I'm glad that I recommended this Fender Eliminator to my friend, because I installed it before. View detail
Fender Eliminator is the basis of Custom
It is Fender Eliminator Kit that I exchanged immediately because I could not allow it by all means in the busa of the 2009 CanadaMODEL which I acquired from my brother. This one also has License Plate Light, and I chose it because it is Bolt On without the need for wiring processing. After all, the appearance is also important for Motorcycle! View detail
Design is good!
Among many Fender Eliminator Kit, the design was the best, and it was the impression that I refreshed, and it was the motive of purchase.
And the way it felt after installation was everything I expected it to be!
View detail
Japanese Vehicle Inspection Correspondence in Stylish
This is a SUPER SPORTS 750 so I wanted to refreshingRace ish around the gears other than the circuit, so I chose this one?
It is convenient because the reflector is attached and it is Japanese Vehicle Inspection Correspondence.
LargeItems that are suitable for the law are appreciated because it is a way of life for people
View detail
Japanese Vehicle Inspection Correspondence
I put this on one of the two mt09's I owned.
I really wanted an EVOTEC one, but I could only get one, so I chose this one because I figured if I had two of them, I'd get a different one.
The OEM tail lamp was easy to use as it was, so the replacement process was easy.
The number lamp and reflector are also included in the package and they are Japanese Vehicle Inspection Correspondence.
View detail
It's on a cbr600rr2021.
Installation is not so strange.
I was able to install it in about an hour.
I'm glad to see that it included parts to fill in the holes we don't use.
View detail
I highly recommend it. It's cool.
I didn't dislike the OEM Swing arm mount Fender, but I replaced it with this one because the rear looked dull.
GOOD Point
? That's cool.
First of all, this is the best. It's simply good-looking; OEM is a design you can't like or dislike, so if you don't like it, I'd recommend buying it.
The motorcycle cover is hard to catch.
Due to the convenience of outdoor storage, the motorcycle cover is hung over the car every time I get in and out of it.
If you're an OEM, the Forme will be trapezoidal. (?) I can't help but get caught up in the Cover.
This was quite a source of frustration, but it's pretty much gone now that I have the Fender Eliminator.
Easy Maintenance
Wheel cleaning, Chain cleaning, Tire replacement, etc.
It's very difficult to do maintenance on an OEM Fender.
It makes it easier to do various maintenance. Also, the OEM Fender set is pretty heavy, so it helps to save weight.
BADPoint
? That's a lot of dirt.
This is not surprising.
There is a lot of mud on the back of the Helmet.
I use it on my commute to work, so I have to think about some kind of countermeasure since I use it even on rainy days.
View detail
It changes the way you look.
I've had them on my previous vehicle and I like them because they look swoopy.
It's well made and still works fine after 3 years.
I have no complaints, but if I had to say it would have been better if the price was a little lower...
It's not hard to install, so it's quick and cool looking! This is a product from Recommendation for those who are
View detail
Regular Products
I bought it because the LED License Plate Light is included in the kit and the gap between the plate and the car body can be changed by the ingenuity from the point of assembling the plate with the bolt nut.
As I thought, I was able to make the mounting hole shaved and expand it so that the Top case of GIVI could be attached in a good way.
The unfortunate part is that I had to install the License Plate Light's Connector separately, although it's exclusive to the vehicle model.
The texture is satisfactory.
View detail
Rear Refreshing
The installation itself is not too difficult, and if you have some knowledge and tools, it's not too difficult to send the bike to a motorcycle shop.
The hardest thing I had to do was to fit the Blinker into the Bracket, which was Large weird. Will it really go in? It was so tight. However, once it's in, there is no wobble at all, and it's a highly accurate product.
The OEM Large Rear Fender is gone and it's very refreshing and tight.
View detail
Excellent
If you follow the attached Installation Manual with pictures, you can use the It can be installed without any problem at all I think that it was good when Reflector was Large a little more View detail
Good stuff
I bought the GSX-R1000R to get rid of the long Fender (Lol) 。
It's shorter, but a little too short from the right side! (Bitter smile) It would be nice if you could consider the overall design balance of the vehicle a little more
I'm not sure why the Reflector, a necessary component, is sold separately
View detail
I've got space under the seat!
I'm sorry I didn't go through Webike, but I bought it in February of this year
The purpose is to expand the space under the seat for installation and maintenance of ignition devices
The product is "Fender Eliminator But the mudguards are bought second hand, chopped and attached with Cemedine SUPERX
OEM License Plate Holder Bracket and Kit included Because it cannot coexist with Bracket, we have to insert a plastic mudguard with a Large diameter Washer between them The License Plate is installed
I asked the shop to install the ignition system device, but I processed it for Wiring He gave us a gift and put it well
Material:It is easy to process because it is aluminum
View detail
I think it's expensive
We-Big's information is wrong, and the first Material that I purchased:Aluminum's slightly nicer Fender Eliminator turned out to be impossible to install After much consideration, I decided on this one It is made of iron, it is heavy and I am worried about the rust However, this Kit is really the size of the Smallest necessary, and the Bolt is a two-point stopper (The OEM stops at 4 Bolts) I'm not going to get the properly vacant Bolt holes or the subtle gap between the Frame and Seat Cowl It is kind to have Sponge Tape to fill in, and the description in Manual is also kind and clear It was easy
When I installed it, it disappeared almost to the point where I couldn't recognize the Fender, and I could not see the tail lamp It looks like the Number is directly below the The same Active's Trapezoidal Reflector is also my favorite You can also install Blinker, but if you want to take advantage of this Compact feeling, please do so! I'd like to replace it with a Small Dice LED Blinker I went with the Hurricane Blinker
Small and disproportionately large Rear Fender and Blinker are not the only ones who can be used I think it's very neat to see the grommeted rear area that comes with it I highly recommend the License Plate Light to anyone who is feeling the same frustration! The white color LEDs are working perfectly fine, too
View detail