![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![Swingarm Protector (1 Set)](https://img.webike-cdn.net/catalogue/images/13113/8456700001_TS.jpg)
Fits: YAMAHA YZ 450F, YAMAHA YZ 450FX, YAMAHA YZ 250F, YAMAHA YZ 250FX, YAMAHA WR 250F, YAMAHA WR 450F
Easy to install! Fit securely!
Installation is very easy, just tighten with Tie Wrap.
The brake hose is also cut to fit beautifully. The Swing Arm is now well protected and secure.
View detail
![Swingarm Protector (1 Set)](https://img.webike-cdn.net/catalogue/images/13113/8456700001_TS.jpg)
Fits: YAMAHA YZ 450F, YAMAHA YZ 450FX, YAMAHA YZ 250F, YAMAHA YZ 250FX, YAMAHA WR 250F, YAMAHA WR 450F
I think it's good.
[How is it used?
Forest road Gare
Was the one you received as per Image?
as it is (i.e. now)
Was the installation difficult?
Easy
How was your experience with it?
It serves its purpose.
[Included Parts:were they on?
It comes with Sponge as a buffer.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
![Swingarm Protector (1 Set)](https://img.webike-cdn.net/catalogue/images/13113/8456900001_TS.jpg)
Used on crf250rally
I had a large scratch on the Swing Arm when I ran in a gully with another vehicle.
I purchased this product to reduce scratches as I have just switched vehicles.
The vehicle is CRF250RLYInitial Model.
Installation is easy
It can be installed without removing the shaft of the rear tire.
If you are not familiar with it, it is easier to remove just the nut for the Right Side Shaft.
CRC556 is also good.
The bolt to stop the chain case is too short for the OEM product. A bolt with the same pitch but 5mm longer is required.
Merit can reduce the number of scratches in the galleys.
Demerit will get sand in it, so slips will be made.
I am happy with my purchase.
View detail
![Swingarm Protector (1 Set)](https://img.webike-cdn.net/catalogue/images/13113/8456800001_TS.jpg)
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
MY2023 for YZ125X
I had been using the same product on my YZ250FX, so I was torn between it and ACERBIS Magnet type, but I decided to go with this one because of its cost performance and reliability.
Installation is simple and is secured with the included thick Tie Wrap.
If mud gets into the swing arm, it can cause minor scratches on the swing arm, so it must be removed and cleaned periodically, such as after a muddy ride.
This may not be necessary for Motocross, but it is essential for Enduro if you do not want to make the Swing Arm too skinny.
View detail
![Swingarm Protector (1 Set)](https://global.webike-cdn.net/photo/impression/88/8846c84285863e3379bcf152b70c9e5aL.jpg)
I didn't get to 00.
[How is it used?
It is not compatible, but I bought it to install on my 2000 RM250.
I was expecting to be able to install it on my acquaintance's 2003 RM250, but the result was that I could not install it.
The Axle Block area of the Swing Arm was too large and I could not get into it.
Was the one you received as per Image?
It was higher quality than I expected. It has some thickness and seems to protect the Swing Arm.
Was the installation difficult?
I was unable to install it, but it comes with Tie Wrap, which can be installed by simply tightening it.
There is no need to remove the Wheel either.
How was your experience with it?
I couldn't use it. It's a pity because the product was good.
[Included Parts:were they on?
It came with a Tie Wrap and some sort of cushioning material to attach to the Swing Arm.
There was no Sticker, which is a certain Off product. Surprising.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It looks like it will be attached to RM after '03, so you can divert at your own risk.
View detail
![Swingarm Protector (1 Set)](https://global.webike-cdn.net/photo/impression/4c/4ca9eea8a85bd9eb27b3b408251e93b4L.jpg)
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
good quality
good quality。i love it View detail
![Swingarm Protector (1 Set)](https://img.webike-cdn.net/catalogue/images/13113/8456600001_TS.jpg)
Unnecessary
KTM 250EXC-F (sixdays 2017 MODEL) Attached to
I wanted to put Decal on the Swing Arm and I wanted it to be Black
Double-sided tape and Tie Wrap on the inside to attach to the Swing Arm The Tie Wrap will break, depending on the run
A MOTARD dress-up would be fine, but not for running the BALIBALIOff-road I wondered if I didn't need it
There's also mud between the Cover and Swing Arm, and the Tie Wrap has to be looked at often It's also a bit expensive
It's your choice...sort of
View detail
![Swingarm Protector (1 Set)](https://img.webike-cdn.net/catalogue/images/13113/8456800001_TS.jpg)
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Easy and reliable
Installation is very easy as it is a Tie Wrap and in the case of YZ125 it is on the swing arm There is no need to remove it because there is a hole for the maintenance hole as well I chose Black to match the BlackRim because I could choose between Black and Black, and the scratches on the Swing Arm It seems to be able to play without worrying about the stickiness I want to keep going
View detail
![Swingarm Protector (1 Set)](https://img.webike-cdn.net/catalogue/images/13113/8456600001_TS.jpg)
We're saved!
I used it on HardEnduro I installed it in order to prevent Wound because there is a gully
When I used it and looked at it after washing the car, I found a gutted Wound in the Guard, so this Parts helped me
View detail
![Swingarm Protector (1 Set)](https://img.webike-cdn.net/catalogue/images/13113/8456500001_TS.jpg)
Fits: HUSQVARNA TC, HUSQVARNA FC, HUSQVARNA TE, HUSQVARNA FE, HUSQVARNA TX 501, HUSQVARNA FX 501, HUSQVARNA FE 501, KTM SX, KTM XC, KTM SX-F, KTM XC-F
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
OEM same etc. ?
Is it the same as HUSQVARNAOEM?
I listened to OEM and tried it
Feeling looked at OEM and the like. I think
I am going to install it, but I hope to install it.
View detail
![Swingarm Protector (1 Set)](https://global.webike-cdn.net/photo/impression/a8/a8eafe0eee8a9e215d258aa6ef46b0aaL.jpg)
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
The display of compatible model - - -
Since I did not have WR 250 F 08 in the conforming model, I bought it with only 8 cars. I was able to install it smoothly without machining pearls. The compatible model which can be confirmed at the time of purchase and the compatible model which is described in the product were different. It is 100 points perfect if it is stated securely! View detail
![Swingarm Protector (1 Set)](https://global.webike-cdn.net/photo/impression/54/54c79c024bfccf66248a6d0e7576f785L.jpg)
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Function is perfect! I think that looks will be divided into preferences
I saw Swingarm's scratch prevention Items.
There is no complaint at all in function. There was nothing to do but I could install it smoothly.
However, it seems that the appearance is divided into preferences?
I planned to paste SwingarmSticker before purchase, but it is difficult to match with color (Because there is no Sense) So I gave up..
Since the surface of the product is matt finished, I think the texture is good.
View detail
![Swingarm Protector (1 Set)](https://global.webike-cdn.net/photo/impression/43/43525b0a10007e2bf81171855689a1bbL.jpg)
Large This is a funny product.
Swingarm's Wound is absolutely attached so I think that it is a good product because it can prevent it.
I am attached since the beginning so I am relieved.
View detail
![Swingarm Protector (1 Set)](https://global.webike-cdn.net/photo/article/26/1447978688026L.jpg)
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Swingarm will not hurt!
It is KTM's PowerParts and etc..
As Enduro gets scratched on Swingarm, it is a feeling to let Cover at Plastic to prevent it.
As far as I know, there is only here for WR.
View detail