Reviews
Exhaust pipe stepping stone injury prevention
I installed this Guard as a measure to prevent mud stains and scratches from stepping stones on the exhaust pipe. I am satisfied with the workability and cost performance of the Guard.
The only complaint is that the paint color of the Guard adheres to the exhaust pipe. Although I have some dissatisfaction with the product, I am satisfied that I have achieved my goal.
View detail
Exhaust pipe protection
I installed it to protect the exhaust pipe of SEROW250 and to dissipate the heat.
The material is aluminum, so it can be bent and adjusted.
I am a little worried about the durability of the hose band since it is fixed with a hose band, but I will be observing its durability.
The coloring of Aluminum is also very Gun meta-like and austere.
View detail
To avoid scorching Pants.
The exhaust pipe of EXC-F has no guard at all, so the moto pan will soon be burnt and perforated. Guard is necessary because the exhaust pipe also gets burnt and dirty.
OEM is a high-end product that costs more than 10,000,000 yen, so it is hard to afford, but this is a commendation at a reasonable price.
View detail
Installed on DG32JXG250 TRICKER
I replaced the exhaust pipe with a Specht exhaust pipe and the OEM Heat Guard moved outward a bit. Sometimes Jeans gets hot so I change it before I get burned.
As you can see in the picture, the heat seems to be avoided as it is back to near normal exhaust pipe.
The length seems to be more than 5cm shorter than Normal heat guard, but I think it's OK at first.
I like the looks of the NORMAL better, but I think this is the one.
View detail
Prevention of burning of Up Exhaust Pipe
It is easy to install because it can be bent freely along the exhaust pipe. It is easy to install because it can be bent freely along the exhaust pipe. View detail
I processed and installed it.
I machined and attached it to the BEAMS front pipe.
The standard Guard melted the hem of the Pants.
Since it is a commuter main, I decided to float it from the pipe to increase the effect as Heat Guard.
Do not use the supplied band, use the screw holes on the Exhaust Guard that comes with the front pipe.
I used the holes in PipeGuard as they are on the front side and drilled holes in PipeGuard to secure the rear side.
The front side is gradually bent at an angle to match the curve of the exhaust pipe and the rear side remains straight.
The Guard is all floating from the Pipe.
I've run it on the road and it doesn't seem to have any problems with vibration.
View detail
It's better than the OEM Guard.
When I replaced it with the 4 Strike Competition Exhaust Pipe of RSV, I installed it for the purpose of heat protection and shielding.
important item
[Was there anything that disappointed you?
It's not a disappointment, but since you can cover a wide range of the exhaust pipe, the Material:It's a little disappointing that the beautiful burn color of the Stainless SteelExhaust pipe is hidden from view.
Do you have any wishes or improvements you would like to make for the Manufacturer?
There was nothing in particular
[Do you have any products to compare it to?
The Exhaust Pipe Guard for 2Cycle is too large and expensive, so this is the only one I could find.
Frequently Asked Items
What made you decide to buy?
As a 4Cycle exhaust pipe UniversalGuard, I bought it because it is the cheapest and longest I have ever seen and it can cover a wide area.
Was the installation difficult?
There is a method of attaching the guard directly to the exhaust pipe, but it does not work for the purpose of heat shielding because the heat of the exhaust is transferred to the guard, so you can install the guard away from the exhaust pipe in the same way as the OEM. Quantity of the ReplacementMount Kit (item number:ZC31-3901):I used 2 sets and installed it. Technically, there is nothing difficult, but because the clearance between the engine cylinder and the exhaust pipe is narrow, I had to use my head to decide the position of the Band and the direction of the Screw to attach the Mount to the exhaust pipe.
【Please tell me the installation point and hang】
Guard is Material:Because it is aluminum, it can be bent to some extent, but extreme bending is not possible, so it is necessary to decide the position of the Mount so that the Guard will fit the shape of the exhaust pipe well.
How was your experience with it?
By using the Mount Kit to mount the guard away from the exhaust pipe, the heat from the exhaust pipe is not transferred to the guard as it should be, and the temperature is high enough that you can touch the guard with your bare hands without getting burned.
[Was the Instruction Manual easy to understand?
The instruction manual is not included, which makes it even more important to have the proper knowledge, skills and tools is required
[Included Parts:were they on?
Stainless Steel Band for Exhaust pipe installation is Quantity:2pc. Set was on.
View detail
That's pretty good!
When running a Dirt, the exhaust pipe is full of small stones, etc Installed
It is easy to install because it can be bent along the curve of the exhaust pipe
It's good for dressing up as well as protecting the exhaust pipe
View detail
The claim is amazing!
I installed it because it can be expected that Wear will melt with Exhaust pipe.
Bending can be done according to the shape of Exhaust pipe so it was easy to install.
There was no resonance due to the vibration at the time of traveling, and there was no chattering noise.
I like the likes and dislikes because the shape is unique.
View detail
Parenthesis is nice.
I changed the Exhaust pipe, so I tried installing it at the same time.
The image is nearly a state for nearly a year using it. I think that it is still a beautiful one.
Regarding installation, since vibration noise comes out when it is brought into close contact with the exhaust pipe to the end, I am floating except the fixed place. I think that it is usual to bend to wrap it up, but it is dared to open.
It's nice to bend easily, but since it gets bent, it is better to tailor it carefully.
Since appearance also changes considerably, it may be good for Dress-up.
Speaking of disadvantages, those who are polishing to always keep the Exhaust pipe in Polished are about to take troublesome removal each time.
View detail
In my case, since it went to the path through a wood etc., it purchased targeting the measure against a dent and the Dress-up effect up of an Exhaust pipe.Since it is fixation in a Band, attachment is easy Ching! Probably it comes seemingly to be one laye
In my case, since it went to the path through a wood etc., it purchased targeting the measure against a dent and the Dress-up effect up of an Exhaust pipe.Since it is fixation in a Band, attachment is easy Ching! Probably it comes seemingly to be one layer of
appearance nearby Off, and Cool (smile)
defense also becomes brave.even [ a free ] -- a few -- a price -- it is high ^^;
View detail
Since the STAINLESS-STEEL part melted when the Motorcycle cover was hung, it processed and attached. I think that it is good.
Since the STAINLESS-STEEL part melted when the Motorcycle cover was hung, it processed and attached.
I think that it is good.
View detail
[Webike Monitor] Since VFR800 tended to have deleted an Exhaust pipe when it fell on the right (it was actually able to delete), it equipped with it. It was good to also hide a crack although it was slightly thin and uncertain touch. The
[Webike Monitor] Since
VFR800 tended to have deleted an Exhaust pipe when it fell on the right (it was actually able to delete), it equipped with it.
It was good to also hide a crack although it was slightly thin and uncertain touch.
The
effect is not known unless it falls (smile).
View detail
It purchased for the purpose of the dress-up up to XR230. Since the pipe of XR was overflowed as it was, although the sanding machine ? cut, it can be processed easily and was very easy to attach. Since a parenthesis is good although greater impor
It purchased for the purpose of the dress-up up to XR230.
Since the pipe of XR was overflowed as it was, although the sanding machine ? cut, it can be processed easily and was very easy to attach.
Since a parenthesis is good although greater importance was attached than to stepping stone prevention to appearance for the dress-up purpose up, it is very much satisfied.
View detail
Since the inner side of a right leg melted with heat, it wound around EX pipe. Cutting is also easy.
Since the inner side of a right leg melted with heat, it wound around EX pipe.
Cutting is also easy.
View detail