Reviews
Firm knee grip.
I was using KIJIMA's Tank Pad (208-006), but the surface was getting rough.
Replaced with EasyGrip Tank Pad.
PROSeries Black.
Since it was supposed to be for Circuit, I thought it would be better for other uses, but I bought it because I thought the finer grains would be less uncomfortable.
The location was at the bottom of the Tank and where the Side cover part fits.
I put it on this part with my own Seat.
result
There is no slippage at all, nor is there any unwanted snagging, allowing for a very firm knee grip.
View detail
Highly effective for circuit driving
We put it on every vehicle we run Circuit.
Just having EasyGrip changes the hold feeling of the vehicle.
It is a stable runner and leads to TimeUp.
The Grip does not wear out immediately, so it can be used for a long time.
View detail
Knee grip support TANK GRIP PERFOMANCE PRO
PRO is installed on L3Z.
I wondered how it would be in terms of Size since it originally has a CW Tank Cover, but the top part was slightly covered.
The Cover is attached by floating it slightly.
The projection is quite small, but the effect is quite good.
There is also Small SaiSize to be put on Side cover, and it is a Recommendation.
View detail
Stabilizes the body
Introduced to facilitate knee grip.
Although there are few uneven surfaces, they do not slip at all and hold the body firmly.
I no longer have to exert myself in full Breaking.
Cutting can be done with scissors (or of course with a cutter knife).
View detail
The best
[How is it used?
I used it for two weeks and was glad I bought it.
Was the one you received as per Image?
Product is exactly as shown in the Image.
Was the installation difficult?
It is a little difficult to apply, but there are YouTube videos on how to do it, and Large is very durable. Also, air bubbles are very noticeable after applying, but after a day, the bubbles are almost invisible.
How was your experience with it?
I can only say that the design is excellent. They do not slip at all.
View detail
Excellent effect, Cost is reluctant.
Since there is no special CBR600RR for the current CBR600RR, we will use a size that would fit the current CBR600RR.
Purchased
I had a hard time getting a good grip on my knees with jeans because the tank was slipping.
We decided to put up with the look and decided to install it.
It works, but if you could make it a little more affordable.
It was good
View detail
To create my own pad
I purchased this to increase the number of Grip locations during Hang-Off.
It is convenient because it can be affixed at any position and in any Size.
However, if you are looking for aesthetics, it is a thick-walled pad that is difficult to cut, so I think it would be better to use a product dedicated to the car model.
The peeling film is red in color, which may surprise those who ordered Clear, but the product is [Color] Clear, so you can use it safely.
View detail
Grip power is outstanding!
[How is it used?
Used in Main for city driving.
Was the one you received as per Image?
The Image was as shown in the Image, but there was a Package crush, which was a little disappointing.
Was the installation difficult?
Silicon-offSeat was included and installation was quick and easy.
How was your experience with it?
Grip force when knee gripping is excellent.
[Included Parts:were they on?
It was all there.
[Was there anything that disappointed you?
The range of hits is too small for the position I usually sit in.
It would be great if a Seat could be added that could also be attached to the Frame section.
View detail
Is good
The ability to cut the image into the desired shape is convenient.
Grip is easier, so the sense of hold is very high.
The performance is no different from expensive products, so it is a good value for the money.
View detail
Knee grip is easy
The posture was not settled during Corner intrusion deceleration has been eliminated.
Good product
View detail
Large enough
Used on ZX-25R side cowl.
It's hard to tell from the product description, but 30×15 Seat is Quantity:1 Set of 2pc. on 25R side cowl.:1 pc. was sufficient.
If you cut with scissors, the cross section will be wobbly and ugly, but if you use a flat-blade nipper and cut the cross section at about 45°, it will be reflexing.
If you do not have a power supply, you can use a plastic bag filled with hot water to warm up the surface.
However, in the case of Tank, it is difficult without Garage because the heat is transferred to the Gasoline inside.
View detail
Fits: DUCATI MONSTER821, DUCATI MONSTER1200, DUCATI MONSTER1200S
It's pretty good.
Purchased to prevent slippage when using knee grip.
I can feel the effects there.
I'm happy with how tight it looks.
Don't forget to degrease it when you apply it!
View detail
Saved me a lot of frustration while driving!
Before I put this product on, the Tank was slipping and I couldn't concentrate because I was too nervous to stabilize my body with Cornering.
Once installed, you can stabilize it with your knees, so you can concentrate on your tire grip and accelerator operation.
I don't like the look of the Standard type because it has large warts, and the Pro type has very fine protrusions, so I prefer the SMART and Parenthesis.
Some people have written that Grip is too good, but I didn't care for it.
WetSeat for degreasing is also included for strong attachment.Quantity:Pair (for Left and Right) The positional relationship between the two is up to the sense of the person who puts it up, but the size feeling is also good as if it were a dedicated product for car models.
View detail
Function emphasis
This is an item that supports the basic way of riding a motorcycle, which is just to put your hand on the Handlebar.
Surprisingly, there are a lot of people who don't have a proper knee grip.
With this pad, you can get a good knee grip even on slippery coated tanks. The grip is great especially when hard braking or when you drop your hips.
Because I was able to do a firm knee grip, there was no arm fatigue at all even with touring over 1000?in two days.
However, I think the appearance will be to your liking. [Color] It's clearly noticeable in Clear. (Body color is White)
If you don't mind the way it looks when parked, this is a RECOMMENDATION.
View detail
It is stable to use.
If you buy a Motorcycle, you must install it.
The Grip feeling is increased and it is stable to use.
It will fit the Z900. Recommended.
View detail
Fits: KAWASAKI Z1000SX
Grip, wear resistance and durability are good.
I bought this for my 2020 NINJA1000.
There are various grips, and I was lost, but this does not slip even Nylon pants, and can grip firmly.
I like it, Quantity:2pc. I bought a Set and put two on as shown in the picture.
It has passed half a year using it, but the making of Rubber is also firm, and the aging deterioration etc. are not seen.
In addition, when you paste it, you can confirm the position firmly if you put a mark on it with masking tape as shown in the attachment, so please refer to it.
Also Mark's "E is circular in shape and is a Type that can be inserted and pasted later.
View detail
Fits: KTM 200 DUKE , KTM 390 DUKE , KTM 125 DUKE
Cheaply diverted in Sale
The M696 was purchased as a Second Machine in order to enjoy Winding, and although there was no problem when wearing Leather, I could not help but feel anxiety or slippage in the Knee grip when wearing Jeans or Nylon Material Pants for the occasional commute on the street. I wanted to do something about it, but then I found this cheap sale. I was worried about the appearance of the pants, but I got this one from ScissorsCut. I'm very happy with it. View detail
Fits: KAWASAKI Z1000SX
I like it
Sticking it to the NINJA 1000 2018
I bought a new Leg Back for touring, and I bought this to prevent the Adjustable Bracket on the Belt of the thigh from hitting the Tank and getting Wound.
Therefore, although it is not for the Knee grip, there is a non-slip effect in my sense, and I am satisfied that I can support my body with the Tank at ease on the Winding road.
View detail
Fits: DUCATI MONSTER821, DUCATI MONSTER1200, DUCATI MONSTER1200S
Design is good!
As far as I checked with Tank Pad of MONSTER S21200
I think it's the best Design.
Large Satisfied
View detail
Product quality? Poor inventory control?
I won't return it because I want to use it as a Pad as soon as possible, but the round part of the Manufacturer logo had deteriorated and the surface was stuck to the alcohol paper bag. The only thing that remains is the round hole where the logo is supposed to be attached, so it functions fine, but you should check your inventory. View detail